Fujitsu AS-48W-K Miniature relay 2 poles-1 to 2 a (for signal switching) Datasheet

MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
AS SERIES
■ FEATURES
●
●
●
●
●
●
●
●
Flat type relay for surface mounting
Super small and light weight
—Height: 6.5 mm
—Weight: approximately 1.5 g
UL, CSA recognized
Conforms to FCC Part 68
—Surge strength 1,500 V
High sensitivity and low power consumption
High reliability—bifurcated contacts
DIL pitch terminals
Plastic sealed type
NO
TF
■ ORDERING INFORMATION
[Example]
AS L – D
(a) (b) (*) (c)
12 W – K
(d) (e) (*) (f )
DE
(a)
Series Name
(b)
Operation Function
OR
– B 05
(*) (g) (h)
AS : AS Series
SI
Nil : Standard type
L : Latching type
GN
Nil : Single winding type
D : Double winding type
(c)
Number of Coil
(d)
Nominal Voltage
(e)
Contact
(f )
Enclosure
K : Plastic sealed type
(g)
Packing Orientation
B : Standard type
(h)
Packing Quantity
05 : 500 pieces
Refer to the COIL DATA CHART
W : Bifurcated type
Note: Actual marking omits the hyphen (-) of (*) and “-B05”
NE
S
W
AS SERIES
■ SAFETY STANDARD AND FILE NUMBERS
UL478, 508 (File No. E45026)
C22.2 No. 14 (File No. LR35579)
Only UL/CSA approval markings are marked on the cover.
Nominal voltage
Contact rating
0.5 A
2A
0.3 A
1.5 to 48 VDC
125 VAC
30 VDC
110 VDC
resistive
■ SPECIFICATIONS
NO
Standard Type
Item
Contact
AS-( ) W-K
Arrangement
Material
Style
Resistance (initial)
Rating (resistive)
Gold overlay silver alloy
Bifurcated
Maximum 50 mΩ (at 1 A 6 VDC)
Life
Other
OR
0.5 A 125 VAC or 1 A 30 VDC
Maximum Carrying Current
2A
Maximum Switching Power
62.5 AV, 30 W
Maximum Switching Voltage
250 VAC, 220 VDC
Maximum Switching Current
2A
Minimum Switching Load*1
0.01 mA 10 mVDC
Nominal Power (at 20°C)
Operate Power (at 20°C)
Insulation
ASL-D ( ) W-K
TF
Capacitance
(at 1 kHz)
Time Value
ASL-( ) W-K
2 Form C (DPDT)
DE
Coil
Single Winding Latching Type Double Winding Latching Type
SI
NE
Approximately 0.5 pF (between open contacts, adjacent contacts)
Approximately 1.0 pF (between coil and contacts)
GN
W
0.14 to 0.3 W
0.1 to 0.15 W
0.20 to 0.3 W
0.08 to 0.17 W
0.06 to 0.085 W
0.11 5 to 0.17 W
S
Operating Temperature
–40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA)
Operate (at nominal voltage)
Maximum 6 ms
Maximum 6 ms (set)
Release (at nominal voltage)
Maximum 4 ms
Maximum 6 ms (reset)
Resistance (at 500 VDC)
Minimum 1,000 MΩ
between open contacts
Dielectric
Strength between adjacent contacts
between coil and contacts
750 VAC 1 minute
Surge Strength
1,500 V (at 10 × 160 µs) (between coil and contacts)
Mechanical
1 × 108 operations minimum
Electrical
2 × 105 ops. min. (0.5 A 125 VAC), 5 × 105 ops. min. (1 A 30 VDC)
Misoperation
Vibration
Resistance Endurance
10 to 55 Hz (double amplitude of 3.3 mm)
Misoperation
Shock
Resistance Endurance
500 m/s2 (11 ±1 ms)
Weight
Approximately 1.5 g
1,000 VAC 1 minute
1,000 VAC 1 minute
1 × 107 operations minimum
10 to 55 Hz (double amplitude of 5.0 mm)
1,000 m/s2 ( 6 ±1 ms)
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
AS SERIES
Standard Type
■ COIL DATA CHART
MODEL
Nominal
voltage
AS-1.5 W-K
1.5 VDC
AS- 3 W-K
3 VDC
AS-4.5 W-K
4.5 VDC
AS- 5 W-K
5 VDC
AS- 6 W-K
AS- 9 W-K
Must operate
voltage*1
Must release
voltage*1
16.1Ω
+1.13 VDC
+0.15 VDC
140 mW
64.3Ω
+2.25 VDC
+0.3 VDC
140 mW
145Ω
+3.38 VDC
+0.45 VDC
140 mW
178Ω
+3.75 VDC
+0.5 VDC
140 mW
6 VDC
257Ω
+4.5 VDC
+0.6 VDC
140 mW
9 VDC
579Ω
+6.75 VDC
+0.9 VDC
140 mW
AS- 12 W-K
12 VDC
1,028Ω
+9.0 VDC
+1.2 VDC
140 mW
AS- 18 W-K
18 VDC
1,620Ω
+13.5 VDC
+1.8 VDC
200 mW
AS- 24 W-K
24 VDC
2,880Ω
+18.0 VDC
+2.4 VDC
200 mW
AS- 48 W-K
48 VDC
7,680Ω
+36.0 VDC
+4.8 VDC
300 mW
Set
voltage*1
Reset
voltage*1
Nominal
power
22.5Ω
+1.13 VDC
-1.13 VDC
100 mW
*1
Coil resistance
(±10%)
NO
TF
Nominal
power
Single Winding Latching Type
Note:
Specified values are subject to pulse wave voltage.
All values in the table are measured at 20°C.
MODEL
Nominal
voltage
ASL-1.5 W-K
1.5 VDC
ASL- 3 W-K
ASL-4.5 W-K
ASL- 5 W-K
ASL- 6 W-K
ASL- 9 W-K
ASL- 12 W-K
Coil resistance
(±10%)
DE
OR
3 VDC
90Ω
+2.25 VDC
-2.25 VDC
100 mW
4.5 VDC
203Ω
+3.38 VDC
-3.38 VDC
100 mW
5 VDC
250Ω
+3.75 VDC
-3.75 VDC
100 mW
-4.5 VDC
100 mW
-6.75 VDC
100 mW
-9.0 VDC
100 mW
6 VDC
9 VDC
12 VDC
ASL- 18 W-K
18 VDC
ASL- 24 W-K
24 VDC
ASL-D1.5 W-K
1.5 VDC
SI
360Ω
810Ω
+6.75 VDC
1,440Ω
+9.0 VDC
2,160Ω
+13.5 VDC
3,840Ω
+18.0 VDC
P 11.25Ω
+1.13 VDC
GN
S 11.25Ω
Double Winding Latching Type
ASL-D 3 W-K
ASL-D4.5 W-K
ASL-D 5 W-K
ASL-D 6 W-K
ASL-D 9 W-K
ASL-D 12 W-K
ASL-D 18 W-K
3 VDC
4.5 VDC
5 VDC
6 VDC
9 VDC
12 VDC
18 VDC
+4.5 VDC
P
45Ω
S
45Ω
P
101Ω
S
101Ω
P
125Ω
S
125Ω
P
180Ω
S
180Ω
P
405Ω
S
405Ω
P
720Ω
S
720Ω
P 1,080Ω
S
24 VDC
P 1,920Ω
S 1,920Ω
Note: *1 Specified values are subject to pulse wave voltage.
All values in the table are measured at 20°C.
-13.5 VDC
-18.0 VDC
+1.13 VDC
+2.25 VDC
+2.25 VDC
+3.38 VDC
+3.38 VDC
+3.75 VDC
+3.75 VDC
+4.5 VDC
+4.5 VDC
+6.75 VDC
+6.75 VDC
+9.0 VDC
+9.0 VDC
+13.5 VDC
S 1,080Ω
ASL-D 24 W-K
NE
+13.5 VDC
+18.0 VDC
+18.0 VDC
W
150 mW
150 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
300 mW
300 mW
P: Primary coil S: Secondary coil
3
AS SERIES
■ CHARACTERISTIC DATA
Please see A relays.
z{
}€~
■ REFERENCE DATA
NO
TF
Distribution of Contact Resistance
100
AS-5W-K
n=100
Make
Break
Distribution(%)
80
60
40
20
0
10
20
30
DE
40
50
60
70
ContactResistance(mΩ)
80
SI
OR
GN
NE
S
W
4
AS SERIES
■ DIMENSIONS
● Dimensions
● PC board mounting
pad layout
(TOP VIEW)
● Schematics
(TOP VIEW)
AS, ASL type (Non-latching type, single winding latching type)
NO
ASL-D type (Double winding latching type)
TF
DE
SI
OR
■ RECOMMENDED SOLDERING CONDITIONS
(TEMPERATURE PROFILE)
GN
NE
S
Note:
Unit: mm
W
1. Temperature profiles show the temperature of the PC board surface.
2. Please perform soldering test with your actual PC board before
mass production, since the temperatures of PC board surfaces
vary according to the size of PC board, status of parts mounting
and heating method.
5
AS SERIES
■ PACKING
(1) PACKING METHOD (ONLY TAPE PACKING IS AVAILABLE)
• Taping standards : JIS C 0806 and
• Packing orientation code : B
RC - 1009B (EIAJ)
• Tape type : TB2416 or TE2416
• Reel type : R24D
Orientation mark side
• Quantity of 1 reel : 500 pieces
(2) DIMENSIONS (in mm)
• REEL DIMENSIONS
NO
Feeding
• TAPE DIMENSIONS
ø 1.55
TF
DE
OR
Note: Relays are sold in packs of 500 pieces, please order
500 pieces as one unit.
SI
Fujitsu Components
International
Headquarter
Offices
GN
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
NE
W
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
S
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: [email protected]
www.fcal.fujitsu.com
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 03/2002
6
Similar pages