39.20 33.30 25.25 19.39 Cover 17.78 Strain Relief Without Insulator Support Material: • Insulator: Glass-Filled Thermoplastic PBT, UL94V-0 • Contact: Copper alloy • Shell: Steel, 100” Tin Over 50” min Copper *Important is that the min mating cycles D-subs must have are 1,000 Electrical: • Contact Resistance: 20M Max. @1Amp DC • Insulation Resistance: 1,000M @500V DC • Dielectric Withstanding Voltage: 1,000V AC/rms 60Hz for 1 Min. • Current Rating: 3 Amp • Voltage Rating: 250V AC/rms 60Hz Unit: MM±0.25MM ITEM NO. RoHS Compliant A-DSF15LPXX-III-R TITLE Flat Ribbon Cable D-Sub Assembly - 15Pin, Male, Low Profile ASSMANN Electronics, Inc. 1840 W. Drake Drive, Suite 101 • Tempe, AZ 85283 Toll Free: 1-877-277-6266 • Email: [email protected] THIS DRAWING IS UNPUBLISHED ©Copyright 2010 by Assmann Electronic Components All International Rights Reserved