RoHS Low Resistance Chip Inductors 0.126±0.012 (3.20±0.30) Inches (mm) Dimensions: LRC20L 0.098±0.008 (2.49±0.20) 0.079±0.008 (2.01±0.20) 0.098±0.008 (2.49±0.20) 0.126±0.012 (3.20±0.30) 0.049 (1.24) 0.098±0.008 (2.49±0.20) 0.078 (1.98) 0.039 (.991) (MHz) 0.039 (.991) 0.039 (.991) Features Inductance (µh) Tolerance (%) Test Freq. (MHz) SRF Min. (MHz) RDC ( Ω ) +/-30% Rated Current (A) LRC20L-R15M-RC .15 20 1 400 0.028 1.45 LRC20L-R27M-RC .27 20 1 250 0.034 1.25 LRC20L-R47M-RC .47 20 1 150 0.042 1.10 LRC20L-1R0M-RC 1.0 20 1 100 0.060 1.00 LRC20L-1R5M-RC 1.5 20 1 85 0.063 0.90 LRC20L-2R2M-RC 2.2 20 1 64 0.097 0.79 LRC20L-3R3M-RC 3.3 20 1 55 0.130 0.70 LRC20L-4R7M-RC 4.7 20 1 43 0.150 0.65 LRC20L-6R8M-RC 6.8 20 1 30 0.210 0.60 Test Frequency: Inductance measured ll on an HP4192 at 1MHz LRC20L-100M-RC 10 20 1 26 0.30 0.45 Operating Temp. Range: i-25° to +85°C. Allied Part Number • Miniature SMT wire-wound open magnetic path construction inductors with low DCR, high current capacity and High Impedance Characteristics. • Excellent solder heat resistance for flow and reflow soldering methods. • Excellent for use as choke coils in DC/DC converter and DC power supply circuits. Electrical Inductance Range: .15µh to 10 µh. Tolerance: 20% for all values Rated Current: Based on Temperature All specifications subject to change without notice. rise not to exceed 35ºC. Inductance Drop 10% typical. Resistance to Soldering Heat: Pre heat: 150ºC ± 10ºC / 1-2 min. Solder temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Physical Packaging: 2000 pieces per 7 inch reel. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 11/11/11 www.alliedcomponents.com