TOSHIBA 2SJ676

2SJ676
TOSHIBA Field Effect Transistor Silicon P-Channel MOS Type (π−MOS V)
2SJ676
Switching Regulator, DC/DC Converter and
Motor Drive Applications
Unit: mm
z Low drain−source ON-resistance: RDS (ON) = 1.6 Ω (typ.)
z High forward transfer admittance: |Yfs| = 2.0 S (typ.)
z Low leakage current: IDSS = −100 μA (max) (VDS = −200 V)
z Enhancement mode: Vth = −1.5 to −3.5 V
(VDS = −10 V, ID = −1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Drain−source voltage
VDSS
−200
V
Drain−gate voltage (RGS = 20 kΩ)
VDGR
−200
V
Gate−source voltage
VGSS
±20
V
(Note 1)
ID
−2.5
A
Pulse (Note 1)
IDP
−10
A
Drain power dissipation
PD
1.3
W
Single-pulse avalanche energy
(Note 2)
EAS
191
mJ
Avalanche current
IAR
−2.5
A
Repetitive avalanche energy (Note 3)
EAR
0.13
mJ
Channel temperature
Tch
150
°C
Storage temperature range
Tstg
−55~150
°C
Drain current
DC
JEDEC
―
JEITA
―
TOSHIBA
2-8M1B
Weight: 0.54 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate
reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and
Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal Characteristics
Characteristic
Thermal resistance, channel to
ambient
Symbol
Max
Unit
Rth (ch−a)
96.1
°C / W
Note 1: Ensure that the channel temperature does not exceed 150°C.
Note 2: VDD = −50 V, Tch = 25°C (initial), L = 48.6 mH, RG = 25 Ω, IAR = −2.5 A
Note 3: Repetitive rating: pulse width limited by maximum channel temperature
This transistor is an electrostatic-sensitive device. Handle with care.
1
2006-11-17
2SJ676
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min
Typ.
Max
Unit
Gate leakage current
IGSS
VGS = ±16 V, VDS = 0 V
—
—
±10
μA
Drain cutoff current
IDSS
VDS = −200 V, VGS = 0 V
—
—
−100
μA
ID = −10 mA, VGS = 0 V
−200
—
—
V
Drain−source breakdown voltage
Gate threshold voltage
V (BR) DSS
Vth
VDS = −10 V, ID = −1 mA
−1.5
—
−3.5
V
Drain−source ON-resistance
RDS (ON)
VGS = −10 V, ID = −1.5 A
—
1.6
2.0
Ω
Forward transfer admittance
|Yfs|
VDS = −10 V, ID = −1.5 A
1.0
2.0
—
S
Input capacitance
Ciss
—
410
—
Reverse transfer capacitance
Crss
—
40
—
Output capacitance
Coss
—
145
—
—
20
—
—
45
—
Rise time
VDS = −10 V, VGS = 0 V, f = 1 MHz
ID = −1.5 A
0V
VGS
tr
Output
pF
−10 V
ton
4.7 Ω
Turn−on time
Switching time
Fall time
RL =
66.7 Ω
tf
Turn−off time
toff
Total gate charge (gate−source
plus gate−drain)
Qg
Gate−source charge
Qgs
Gate−drain (“Miller”) charge
Qgd
Duty <
= 1%, tw = 10 μs
ns
—
15
—
—
85
—
—
10
—
—
6
—
—
4
—
VDD ∼
− −100 V
VDD ≈ −160 V, VGS = −10 V, ID = −2.5 A
nC
Source−Drain Ratings and Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min
Typ.
Max
Unit
Continuous drain reverse current
(Note 1)
IDR
—
—
—
−2.5
A
Pulse drain reverse current
(Note 1)
IDRP
—
—
—
−10
A
Forward voltage (diode)
VDSF
IDR = −2.5 A, VGS = 0 V
—
—
2.0
V
Reverse recovery time
trr
IDR = −2.5 A, VGS = 0 V
dlDR / dt = 100 A / μs
—
135
—
ns
—
0.81
—
μC
Reverse recovery charge
Qrr
Marking
J676
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-17
2SJ676
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
3
2006-11-17