LED-50W Series– Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <20.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.50 Amps max Maximum Power: 50W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < _ 20% @ Full Load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protection: utput Over-Voltage, Output Over-Current, and O Output Short Circuit Protection with Auto Recovery Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C (3330mA and 15V, 88°C) (4200mA and 12V, 78°C) Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: • Total Power: 50 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 • High Power Factor • UL8750 • UL Sign Components Manual (S.A.M. Models) Constant Current - Product Specifications Model Number Output Current Output Voltage (mA ±3%) Range (Vdc) Max. Output Power (W) Typical Efficiency LED50W-142-C0350-XX 350 47-142 49.7 89% LED50W-111-C0450-XX 450 37-111 49.9 89% Convection LED50W-072-C0530-XX 530 24-72 38.1 88% LED50W-072-C0700-XX 700 24-72 50 88% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED50W-060-C0830-XX 830 20-60 49.8 88% Sound Rating: Class A LED50W-048-C1050-XX 1050 16-48 50 88% MTBF: 74,000 Hours at full load and 40ºC ambient conditions 4 per MIL-217F Notice 2 LED50W-042-C1190-XX 1190 14-42 50 87% LED50W-040-C1250-XX 1250 13-40 50 87% EMC: FCC 47CFR Part 15 Class B compliant LED50W-036-C1400-XX 1400 12-36 50 87% LED50W-029-C1750-XX 1750 9-29 50 87% LED50W-024-C2100-XX 2100 8-24 50 87% LED50W-020-C2500-XX 2500 7-20 50 87% LED50W-018-C2800-XX 2800 6-18 50 86% LED50W-015-C3330-XX 3330 5-15 49.9 85% LED50W-012-C4200-XX 4200 4-12 50 84% -XX indicates dimming options are available. See options at left. Blank = fixed current output Ordering Options: -D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers. See page 3 for additional specifications. Sign Components Manual E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Constant Voltage - Product Specifications Model Number LED50W-012 LED50W-015 • Output Voltage Output Current (Vdc ±5%) Range (mA) Max. Output Power (W) Typical Efficiency 12 1050-4200 50 84% 15 833-3330 49.9 85% LED50W-018 18 700-2800 50 86% LED50W-020 20 625-2500 50 87% LED50W-024 LED50W-029 • 24 525-2100 50 87% 29 438-1750 50 87% LED50W-036 36 350-1400 50 87% LED50W-040 40 313-1250 50 87% LED50W-042 42 298-1190 50 87% LED50W-048 48 263-1050 50 88% LED50W-060 60 208-830 49.8 88% LED50W-072 72 175-700 50 88% LED50W-111 111 113-450 49.9 89% LED50W-142 142 88-350 49.7 89% • Indicates S.A.M. Class 2: US/Canada Rev 10-13-16 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED50W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 3 Dimensions - IN [mm] 0.14 [3.6] 7.24 [183.9] 5.91 [150.1] MIN. 0.25 [6.4] 0.24 [6.1] 0.39 ± 0.04 [9.9 ± 1.0] 0.54 [14] Input White (N) Black (L) Output Red (+) Blue (-) Dimming Purple (+) Gray (-) Tc POINT=90°C MAX 0.39 ± .04 [9.9 ± 1.0] 5.91 [150.1] MIN. 0.30 [7.6] 2.25 [57] 7.64 [194.1] WIRE SPECS: Input Leads: 18-AWG, Rated 600V, 105°C, min. Output Leads: 18-AWG, Rated 600V, 105°C, min. Dimming Leads: 22-AWG, Rated 600V, 105°C. All wires are stranded with solder dipped ends 0.14 [3.6] 0.18 [4.6] 0.390 [9.9] 1.013 [25.7] 1.690 [42.9] 0.160 [4.1] 0.90 45% 0.80 40% 0.70 THD PF 0.50 25% 120Vac 277Vac 0.30 15% 0.10 10% 0.00 50% 60% 70% 80% 90% Load 100% 0% 50% Lifetime / Case Temperature (Full Load @ 120Vac) 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) 120Vac 277Vac 20% 0.20 90 Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specification. Driver performance may drift out of published specifications as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. Typical Efficiency / Load 95% 30% 0.40 Lifetime (kHrs) 100% 35% 0.60 125 115 105 90 85 75 65 55 45 35 25 15 5 0 50 THD / Load 50% Efficiency Power Factor / Load 1.00 90% 85% 80% 120Vac 277Vac 75% 60% 70% 80% Load 90% 100% Safety Cert. UL/CUL CSA CE EMC Standard EN55015 EN61000-3-2 EN61000-3-3 FCC, 47CFR Part 15 Standard UL8750 22.2 EN61347 Notes EN6100-4-5 2KV L-N, 8/20 μsec Surge Protection 70% 33% 45% 58% 60% Load 83% > 80% Rated Power Class C Class B UL Conditions of Acceptability See website for additional information Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com 92% 100% LED50W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 3 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V ——- 2 mA +15 V Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Typical Dimming Circuit Dim (+) Purple LED50W-XX-CXXXX-D IP710 Wall Dimmer Dim (-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Control Voltage Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V 7V Purple-to-Gray Voltage (Vdc) 8V 9V 10V Notes: 1. 2. 3. 4. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com