Keysight E363xA Series Programmable DC Power Supplies Data Sheet 02 | Keysight | E363xA Series Programmable DC Power Supplies - Data Sheet Clean and Stable Power with Programmability at an Affordable Price Affordable programmable power supplies to meet your needs The Keysight Technologies, Inc. E363xA Series of programmable DC power supplies gives you the performance of the system power supplies at a decent price. All models provide clean power, excellent regulation and a fast transient response with built-in GPIB and RS-232 interfaces. The E363xA Series is designed to meet the requirements of the most demanding applications in R&D design verifications, production testing, and QA verifications with traditional quality and reliability which you can count on. Excellent performance you can trust With the 0.01% load and line regulation, the E363xA Series can maintain a steady output when power line and load changes occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Remote interface If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy-to-use SCPI (Standard Commands for Programmable Instruments). The user’s guide describes the process for the first-time programmers. Front panel operation A knob and self-guiding keypads allow you to set the output at your desired resolution quickly and easily. You can store and recall for up to three complete setups using the internal non-volatile memory. The output on/off button sets the output to zero. E3631A triple-output power supply This famous 80-watt triple output supply offers three independent outputs: 0 to 6 V/5A, 0 to +25V/1A and 0 to –25V/1A. The 6 V output is electrically isolated from the ±25 V supply to minimize any interference between circuits under test. The ±25 V outputs can be set to track each other. E3632A/33A/34A single-output dual range power supplies These single output power supplies give you the flexibility to select from a dual output range. The output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sensing is available to eliminate the errors caused by voltage drops on the load leads. The E3633A/34A offer front and rear output terminals for easy wiring. Reliable Power, Repeatable Results –– Single and triple output –– 80 W to 200 W output power –– Dual range output (except E3631A) –– Low noise and excellent regulation –– Remote sensing (except E3631A) –– Front and rear output terminals (E3633A/34A only) –– GPIB and RS-232 standard –– Save and recall functions –– Overvoltage protection, overcurrent protection (except E3631A) 03 | Keysight | E363xA Series Programmable DC Power Supplies - Data Sheet E3631A/32A/33A/34A Programmable DC Power Supply Specifications Model Number 1 0 to +6 V, 0 to 5 A E3631A 2 0 to +25 V, 0 to 1 A 3 0 to –25 V, 0 to 1 A DC output Rating (0 to 40 ºC) Load regulation ± (% of output + offset) Line regulation ± (% of output + offset) Ripple and noise (20 Hz to 20 MHz) Normal mode voltage < 350 μVrms/2 mVpp Normal mode current < 2 mArms < 500 μArms Common mode current Accuracy1 12 months (25 ºC + 5 ºC), ± (% output + offset) Programming Voltage Current E3632A E3633A E3634A 0 to 15 V/7 A or 0 to 30 V/4 A < 0.01% + 2 mV < 0.01% + 250 μA < 0.01% + 2 mV < 0.01% + 250 μA 0 to 8 V/20 A or 0 to 20 V/10 A 0 to 25 V/7 A or 0 to 50 V/ 4 A < 350 μVrms/3 mVpp < 2 mArms < 500 μVrms/ 3 mVpp < 1.5 μArms 0.1% + 5 mV 0.2% + 10 mA 0.05% + 20 mV 0.15% + 4 mA 0.05% + 10 mV 0.2% + 10 mA 0.1% + 5 mV 0.2% + 10 mA 0.05% + 10 mV 0.15% + 4 mA 0.05% + 5 mV 0.15% + 5 mA 0.5 mV/0.5 mA 0.5 mV/0.5 mA 1.5 mV/0.1 mA 1.5 mV/0.1 mA 1 mV/0.5 mA 0.5 mV/0.1 mA 1 mV/1 mA 10 mV/1 mA 1 mV/1 mA Readback 2 Voltage Current Resolution Program Readback Meter Transient response 1 mV/1 mA 0.5 mV/1 mA 3 mV/0.5 mA 1.5 mV/0.5 mA 1 mV/1 mA (< 10A), 10 mA (¡ 10 A) Less than 50 μsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa Command processing time3 OVP/OCP Accuracy ± (% output + offset) Activation time < 50 msec < 100 msec N/A 0.5% + 0.5 V/0.5% + 0.5 A N/A 1.5 msec, OVP ≥3 V/< 10 msec, OVP < 3 V and OCP <10 msec Temperature coefficient per ºC (% output + offset) Voltage 0.01% + 2 mV Current 0.02% + 3 mA 0.01% + 3 mV 0.02% + 0.5 mA 0.02% + 3 mA Stability, constant load & temperature ± (% of output + offset), 8 hrs Voltage 0.03% + 1 mV 0.02% + 2 mV 0.02% + 1 mV Current 0.1% + 3 mA 0.05% + 1 mA 0.1% + 1 mA Remote Sense (max. N/A voltage in each load lead) Voltage programming speed, to within 1% of total excursion Up Down Full load 11 msec 50 msec No load 10 msec Full load 13 msec No load 200 msec 1V 0.7 V 50 msec 95 msec 80 msec 20 msec 20 msec 45 msec 100 msec 45 msec 45 msec 30 msec 30 msec 400 msec 400 msec 450 msec 450 msec 1. Accuracy specifications are valid after a 1-hour warm-up and calibration at 25 ºC. 2. Accuracy refers to readback over GPIB and RS-232 or front panel with respect to actual output. 3. Maximum time for output to change after receipt of commands. 04 | Keysight | E363xA Series Programmable DC Power Supplies - Data Sheet E3631A Model number 1 2 AC input (47 Hz – 63 Hz) E3632A 3 100 Vac ±10% (Opt 0E9)/115 Vac ±10% (Std)/230 Vac ±10% (0E3) Dimensions Weight E3633A 213 x mm W x 133 mm H x 348 mm D (8.4 x 5.2 x 13.7 in) 8.2 kg (18 lbs) net, 11 kg (24 lbs) shipping Warranty Product regulation 9.5 kg (21 lbs) net, 12 kg (26 lbs) shipping Three years for E363xA series power supplies Three months for standard shipped accessories Certified to CSA 22.2 No. 231 (for E3631A), No. 1010.1 (for E3632A/33A/34A); conforms to IEC 1010-1; carries CE marks; complies with CISPR-11, Group 1, Class A Ordering Information E3630 Series Power Supplies E3631A 80-Watt Triple Power Supply E3632A 120-Watt Single Power Supply E3633A/34A 200-Watt Single Power Supply Standard Shipped Accessories User’s & Service guide, Product Reference CD, AC power cord Power Options Opt. 0E3 230 Vac ± 10% Opt. 0EM 115 Vac ± 10% Opt. 0E9 100 Vac ± 10% Other Options Opt. 0L2 Extra manual sets Opt. 1CM Rackmount kit* Opt. UK6 Commercial calibration with test result data E3600A-100 Test lead kit Rackmount Kits* Keysight E3631A/32A/33A/34A To rackmount two instruments side-by-side Lock-link Kit (P/N 5061-9694) Flange Kit (P/N 5063-9214) To rackmount one or two instruments in a sliding support shelf Support Shelf (P/N 5063-9256) Slide Kit (P/N 1494-0015) required for support shelf * Rackmounting with 1CM or lock-link/flange kit requires Keysight or customer support rails Keysight Support Rails-E3663AC E3634A 05 | Keysight | E363xA Series Programmable DC Power Supplies - Data Sheet myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-09-23-14) This information is subject to change without notice. © Keysight Technologies, 2010-2014 Published in USA, July 31, 2014 5968-9726EN www.keysight.com