90W Single Output Moistureproof Adaptor O WA - 9 0 E series IP67 ■ Features Universal AC input / Full range Built-in active PFC function High efficiency up to 91% No load power consumption<0.15W Energy efficiency Level VI Comply with EU ErP and meet CoC Version 5 Protections: Short circuit / Over current / ■ Applications Robotic lawn mower Household appliance Battery charging General electronic products in dusty or humid environment Over voltage / Over temperature Class Ⅱ power unit, no FG Fanless design, cooling by free air convection 5 years warranty ■ Description OWA-90E is a 90W AC/DC, class II (without earth pin) external power supply series pinpointing the moistureproof feature. The fully-potted silicone inside the plastic enclosure enhances the heat dissipation; it also benefits that the OWA-90E is approved for IP 67 level so that this series specializes the application in which the damp, humidity or dust resistance is needed for the external power supply. OWA-90E follows the latest energy efficiency demand, and is compliant with EU ErP and meets Code of Conduct(CoC) Version 5; the no load power consumption is less than 0.15W. It is certified with EN 61558-2-16; moreover, the compliance to EN 60335-1 for selected models can greatly simplify the system design such as household appliances. OWA-90E adopts the universal input range from 90VAC to 264VAC, and incorporates a built-in PFC function. With the working efficiency up to 91%, OWA-90E is cooled by free air convection; the working temperature ranges from -40℃ to +70℃. ■ Model Encoding OWA - 90 E - 12 Output voltage European type of AC plug Output wattage Series name File Name:OWA-90E-SPEC 2015-01-27 O WA - 9 0 E 90W Single Output Moistureproof Adaptor series SPECIFICATION MODEL OWA-90E-12 OWA-90E-15 OWA-90E-20 OWA-90E-24 OWA-90E-30 OWA-90E-36 OWA-90E-42 OWA-90E-48 OWA-90E-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V RATED CURRENT 7.5A 6A 4.5A 3.75A 3A 2.5A 2.15A 1.88A 1.67A RATED POWER 90W 90W 90W 90W 90W 90W 90.3W 90.24W 90.18W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 250mVp-p 250mVp-p 350mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 ±4.0% ±4.0% ±4.0% ±2.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 90% 91% 91% 91% 91% 54 ~ 60V 59 ~ 66V 115VAC / 230VAC HOLD UP TIME (Typ.) 16ms at full load 115VAC / 230VAC VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.96/230VAC at full load EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) 0.95A / 115VAC INRUSH CURRENT (Typ.) COLD START 60A(twidth=550μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.25mA / 240VAC OVERLOAD PROTECTION ±3.0% LINE REGULATION SETUP, RISE TIME Note.4 500ms, 80ms at 95% load INPUT ±3.0% SHORT CIRCUIT 90% 90% 0.5A / 230VAC 105 ~ 115% Protection type : Hiccup mode, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 15 ~ 17V OVER VOLTAGE 90% 17.5 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 40V 41 ~ 46V 46 ~ 54V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH SAFETY & EMC TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS EN61558-1,-2-16 listed; EN60335-1 listed(except for OWA-90E-42,48,54); IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN55014-2, light industry level (surge L- N : 2KV), criteria A MTBF 292.8K hrs min. OTHERS DIMENSION PACKING NOTE Compliance to EN55022 (CISPR22) Class B, EN55014-1, EN61000-3-2,-3 MIL-HDBK-217F (25℃) 171*63*37.5mm 0.92Kg; 16pcs/15.7Kg/1.01CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:OWA-90E-SPEC 2015-01-27 O WA - 9 0 E 90W Single Output Moistureproof Adaptor series Block Diagram PFC fosc : 50~120KHz PWM fosc : 60~130KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V O.L.P. O.T.P. DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 230VAC Input only 70 60 50 LOAD (%) LOAD (%) 80 40 20 -40 -25 -10 0 15 30 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:OWA-90E-SPEC 2015-01-27 O WA - 9 0 E 90W Single Output Moistureproof Adaptor Mechanical Specification series Unit:mm 171 5 5 1500±20 300±20 3 63 H05RN-F 1.0mm ×2C 2 4 2 1 H05RN-F 1.0mm ×2C 2 5 2 -ψ 4.5 37.5 5 Input Plug Type All standard models : CEE 7/7 Output Plug Assignment Model Category Plug Description Plug Picture PIN NO. OUTPUT 3 For standard model For optional model XLR 4P, NEUTRIK NC4MX, or equivalent 2 4 1,2 +V 3,4 -V 1 +V 2 floated 1 1 Lumberg 3611 03, or equivalent 2 3 3 -V 1 +V 2,3 -V 1 +V 2 -V 1 +V 2 -V 1 +V 2 -V 2 For optional model For optional model For optional model For optional model For optional model XLR 3P,NEUTRIK NC3MX, or equivalent 3 CHOGORI 22002411-01 or equivalent 1 2 1 Unicable UT-D170F4-2P or equivalent 1 2 Unicable UT-D224-2P or equivalent 1 2 2.1φ x 5.5φ x 11 mm, center +, tuning fork type CENTER +V Outside Inside ※ For details, please contact MEAN WELL. Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:OWA-90E-SPEC 2015-01-27