MMSZ4681-V-G to MMSZ4717-V-G www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar Zener diodes • Standard Zener voltage tolerance is ± 5 % • High temperature soldering guaranteed: 260 °C/4 x 10 s set terminals • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 43 V Test current IZT 0.05 mA VZ specification Thermal equilibrium Int. construction Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY MMSZ4681-V-G to MMSZ4717-V-G MMSZ4681-V-G to MMSZ4717-V-G-series-18 10 000 (8 mm tape on 13" reel) 10 000/box MMSZ4681-V-G to MMSZ4717-V-G MMSZ4681-V-G to MMSZ4717-V-G-series-08 3000 (8 mm tape on 7" reel) 15 000/box PACKAGE PACKAGE NAME SOD-123 WEIGHT 9.4 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation TEST CONDITION SYMBOL VALUE UNIT TL = 75 °C, on FR - 4 or FR - 5 board with minimum recommended solder pad layout Ptot 500 mW On FR - 4 or FR - 5 board with minimum recommended solder pad layou RthJA 340 K/W Tj 150 °C Tstg - 55 to + 150 °C Zener current (see table “Characteristics”) Junction to ambient air Junction temperature Storage temperature range Rev. 1.1, 29-Nov-11 Document Number: 83386 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMSZ4681-V-G to MMSZ4717-V-G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE (1) TEST CURRENT VZ at IZT1 IZT1 V mA MARKING CODE MIN. NOM. MAX. REVERSE CURRENT IR at VR μA V MAX. MMSZ4681-V-G TF 2.28 2.4 2.52 0.05 2 MMSZ4682-V-G TH 2.57 2.7 2.84 0.05 1 1 1 MMSZ4683-V-G TJ 2.85 3 3.15 0.05 0.8 1 MMSZ4684-V-G TK 3.14 3.3 3.47 0.05 7.5 1.5 MMSZ4685-V-G TM 3.42 3.6 3.78 0.05 7.5 2 MMSZ4686-V-G TN 3.71 3.9 4.1 0.05 5 2 MMSZ4687-V-G TP 4.09 4.3 4.52 0.05 4 2 MMSZ4688-V-G TT 4.47 4.7 4.94 0.05 10 3 MMSZ4689-V-G TU 4.85 5.1 5.36 0.05 10 3 MMSZ4690-V-G TV 5.32 5.6 5.88 0.05 10 4 MMSZ4691-V-G TA 5.89 6.2 6.51 0.05 10 5 MMSZ4692-V-G TX 6.46 6.8 7.14 0.05 10 5.1 MMSZ4693-V-G TY 7.13 7.5 7.88 0.05 10 5.7 MMSZ4694-V-G TZ 7.79 8.2 8.61 0.05 1 6.2 MMSZ4695-V-G UC 8.27 8.7 9.14 0.05 1 6.6 MMSZ4696-V-G UD 8.65 9.1 9.56 0.05 1 6.9 MMSZ4697-V-G UE 9.5 10 10.5 0.05 1 7.6 MMSZ4698-V-G UF 10.5 11 11.6 0.05 0.05 8.4 MMSZ4699-V-G UH 11.4 12 12.6 0.05 0.05 9.1 MMSZ4700-V-G UJ 12.4 13 13.7 0.05 0.05 9.8 MMSZ4701-V-G UK 13.3 14 14.7 0.05 0.05 10.6 MMSZ4702-V-G UM 14.3 15 15.8 0.05 0.05 11.4 MMSZ4703-V-G UN 15.2 16 16.8 0.05 0.05 12.1 MMSZ4704-V-G UP 16.2 17 17.9 0.05 0.05 12.9 MMSZ4705-V-G UT 17.1 18 18.9 0.05 0.05 13.6 MMSZ4706-V-G UU 18.1 19 20 0.05 0.05 14.4 MMSZ4707-V-G UV 19 20 21 0.05 0.01 15.2 MMSZ4708-V-G UA 20.9 22 23.1 0.05 0.01 16.7 MMSZ4709-V-G UZ 22.8 24 25.2 0.05 0.01 18.2 MMSZ4710-V-G UY 23.8 25 26.3 0.05 0.01 19 MMSZ4711-V-G ZA 25.7 27 28.4 0.05 0.01 20.4 MMSZ4712-V-G ZC 26.6 28 29.4 0.05 0.01 21.2 MMSZ4713-V-G ZD 28.5 30 31.5 0.05 0.01 22.8 MMSZ4714-V-G ZE 31.4 33 34.7 0.05 0.01 25 MMSZ4715-V-G ZF 34.2 36 37.8 0.05 0.01 27.3 MMSZ4716-V-G ZH 37.1 39 41 0.05 0.01 29.6 MMSZ4717-V-G ZJ 40.9 43 45.2 0.05 0.01 32.6 Notes • Maximum VF = 0.9 V at IF = 10 mA (1) Measured with device junction in thermal equilibrium Rev. 1.1, 29-Nov-11 Document Number: 83386 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMSZ4681-V-G to MMSZ4717-V-G www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 15 TKVZ - Temperature Coefficient of VZ (10-4/K) Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 20 40 60 IZ = 5 mA 0 0 80 100 120 140 160 Tamb - Ambient Temperature (°C) 20850 Fig. 1 - Total Power Dissipation vs. Ambient Temperature 10 20 30 40 50 VZ - Z-Voltage (V) 95 9600 Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage 1000 100 IF - Forward Current (mA) VZ - Voltage Change (mV) 5 -5 0 Tj = 25 °C 100 IZ = 5 mA 10 10 Tj = 25 °C 1 0.1 0.01 0.001 1 0 5 10 15 20 0 25 VZ - Z-Voltage (V) 95 9598 0.2 0.4 0.6 0.8 1.0 VF - Forward Voltage (V) 95 9605 Fig. 2 - Typical Change of Working Voltage under Operating Conditions at Tamb = 25 °C Fig. 5 - Forward Current vs. Forward Voltage 1.3 100 VZtn = VZt/VZ (25 °C) 1.2 80 TKVZ = 10 x 10-4/K 8 x 10-4/K 6 x 10-4/K 1.1 4 x 10-4/K 2 x 10-4/K 0 1.0 - 2 x 10-4/K - 4 x 10-4/K 0.9 0.8 IZ - Z-Current (mA) VZtn - Relative Voltage Change 10 Ptot = 500 mW Tamb = 25 °C 60 40 20 0 - 60 95 9599 0 60 120 180 240 Tj - Junction Temperature (°C) Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature Rev. 1.1, 29-Nov-11 0 95 9604 4 6 8 12 20 VZ - Z-Voltage (V) Fig. 6 - Z-Current vs. Z-Voltage Document Number: 83386 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMSZ4681-V-G to MMSZ4717-V-G www.vishay.com Vishay Semiconductors 50 Ptot = 500 mW Tamb = 25 °C 40 IZ - Z-Current (mA) rZ - Differential Z-Resistance (Ω) 1000 30 20 10 IZ = 1 mA 100 5 mA 10 10 mA Tj = 25 °C 1 0 15 20 25 30 35 VZ - Z-Voltage (V) 95 9607 5 0 15 20 25 VZ - Z-Voltage (V) 95 9606 Fig. 7 - Z-Current vs. Z-Voltage 10 Fig. 8 - Differential Z-Resistance vs. Z-Voltage 0.10 (0.004) 0.15 (0.006) 8° 0.45 (0.018) 0.25 (0.010) 0° to 0.2 (0.008) 1 (0.039) 1.35 (0.053) 0.1 (0.004) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-123 0.5 (0.020) ref. Cathode bar Mounting Pad Layout 2.85 (0.112) 2.55 (0.100) 0.85 (0.033) 2.5 (0.098) 0.85 (0.033) 3.55 (0.140) 1.40 (0.055) 3.85 (0.152) 1.7 (0.067) 0.45 (0.018) 0.65 (0.026) 0.85 (0.033) Rev. 4 - Date: 24. Sep. 2009 Document no.: S8-V-3910.01-001 (4) 17432 Rev. 1.1, 29-Nov-11 Document Number: 83386 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000