RN1010, RN1011 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) RN1010,RN1011 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications Unit: mm l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process l Complementary to RN2010~RN2011 Equivalent Circuit Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V IC 100 mA P C* 400 mW Tj 150 °C Tstg −55~125 °C Collector current Collector power dissipation Junction temperature Storage temperature range JEDEC EIAJ TOSHIBA Weight: 0.21g TO-92 SC-43 2-5F1B Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Collector cut-off current ICBO ― Emitter cut-off current IEBO DC current gain Characteristic Collector-emitter saturation voltage Transition frequency Collector output capacitance Input resistor RN1010 RN1011 Test Condition Min Typ. Max Unit VCB = 50V, IE = 0 ― ― 100 nA ― VEB = 5V, IC = 0 ― ― 100 nA hFE ― VCE = 5V, IC = 1mA 120 ― 700 VCE (sat) ― IC = 5mA, IB = 0.25mA ― 0.1 0.3 V fT ― VCE = 10V, IC = 5mA ― 250 ― MHz Cob ― VCB = 10V, IE = 0, f = 1MHz ― 3 6 pF R1 ― 3.29 4.7 6.11 7 10 13 1 kΩ 2001-06-07 RN1010, RN1011 2 2001-06-07 RN1010, RN1011 3 2001-06-07 RN1010, RN1011 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2001-06-07