MKT 1818 Vishay Roederstein Metallized Polyester Film Capacitors Related Document: IEC 60384-2, CECC 30 400 MAIN APPLICATIONS: Dimensions in millimeters Blocking, bypassing, filtering and timing, high frequency coupling and decoupling. Interference suppression in low voltage applications. L Max. W Max. 0.6 Marking H Max. MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture ± 0.4 7.5 ± 0.4 DIELECTRIC: Ø 0.6 6.0-1 Polyester film ELECTRODES: INSULATION RESISTANCE: Vacuum deposited aluminum COATING: Measured with 100 VDC (63 VDC series at 50 VDC) after one minute Flame retardant plastic case (UL-class 94 V-0), green, epoxy resin sealed 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR > 100 VDC: CONSTRUCTION: For C ≤ 0.33µF and UR ≤ 100 VDC: Extended metallized film (refer to general information) TIME CONSTANT: LEADS: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute 15,000 MΩ minimum value (50,000 MΩ typical value) Tinned wire IEC TEST CLASSIFICATION: For C > 0.33µF and UR ≤ 100 VDC: 55/100/56, according to IEC 60068 CAPACITANCE DRIFT: 5000 s minimum value (15,000 s typical value) OPERATING TEMPERATURE RANGE: Up to + 40°C, ± 1.5% for a period of two years - 55°C to + 100°C DERATING FOR DC AND AC CATEGORY VOLTAGE UC: CAPACITANCE RANGE: At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR 1000pF to 1.0µF CAPACITANCE TOLERANCES: SELF INDUCTANCE: ± 20% (M), ± 10% (K), ± 5% (J) ~ 6nH measured with 2mm long leads RATED VOLTAGES (UR): PULL TEST ON LEADS: 63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC RELIABILITY: ≥ 30 N in direction of leads according to IEC 60068-2-21 PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: 40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VAC TEST VOLTAGE (ELECTRODE/ELECTRODE): Operational life > 300,000h Failure rate < 2 FIT (40°C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. 1.6 x UR for 2 s MAXIMUM PULSE RISE TIME Maximum Pulse Rise Time dv/dt [V/µs] PCM (mm) 7.5 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC 12 20 32 41 70 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. DISSIPATION FACTOR TAN δ MEASURED AT 1kHz 10kHz 100kHz C ≤ 0.1µF 0.1µF < C ≤ 1.0µF -3 8 x 10-3 15 x 10-3 — 8 x 10 15 x 10-3 25 x 10-3 Maximum values www.vishay.com 40 For technical questions, contact [email protected] Document Number 26009 Revision 10-Jun-02 MKT 1818 Metallized Polyester, Related Document: IEC 60384-2, CECC 30 400 Vishay Roederstein CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC VOLTAGE CODE 63* 630 VDC/ 220 VAC W H L W H L W H L W H L W H L 1000 pF - 210 — — — — — — — — — — — — 2.5 7.5 10.0 1500 pF - 215 — — — — — — — — — — — — 2.5 7.5 10.0 2200 pF - 222 — — — — — — — — — — — — 2.5 7.5 10.0 3300 pF - 233 — — — — — — — — — 2.5 7.5 10.0 3.0 8.5 10.0 4700 pF - 247 — — — — — — — — — 2.5 7.5 10.0 — — — 6800 pF - 268 — — — — — — — — — 2.5 7.5 10.0 — — — 0.01 µF - 310 — — — — — — 2.5 7.5 10.0 3.0 8.5 10.0 — — — 0.015 µF - 315 — — — — — — 2.5 7.5 10.0 — — — — — — 0.022 µF - 322 — — — 2.5 7.5 10.0 3.0 8.5 10.0 — — — — — — 0.033 µF - 333 — — — 2.5 7.5 10.0 3.0 8.5 10.0 — — — — — — 0.047 µF - 347 — — — 2.5 7.5 10.0 4.0 9.0 10.0 — — — — — — 0.068 µF - 368 — — — 2.5 7.5 10.0 4.5 9.5 10.0 — — — — — — 10.5 10.3 0.1 µF - 410 2.5 7.5 10.0 3.0 8.5 10.0 5.0 — — — — — — 0.15 µF - 415 2.5 7.5 10.0 3.0 8.5 10.0 — — — — — — — — — 0.22 µF - 422 3.0 8.5 10.0 4.0 9.0 10.0 — — — — — — — — — 0.33 µF - 433 4.0 9.0 10.0 5.0 10.5 10.3 — — — — — — — — — 0.47 µF - 447 4.5 9.5 10.0 5.7 11.5 10.3 — — — — — — — — — 0.68 µF - 468 5.0 10.5 10.3 — — — — — — — — — — — — 1.0 µF - 510 5.7 11.5 10.3 — — — — — — — — — — — — Further values upon request. *Not suitable for mains applications. Please refer to X-capacitors in our catalog “RFI Suppression Components”. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLE PCM 7.5 D AMMO 16.5 S* MKT 1818-310-255-D X G AMMO 18.5 S* MKT 1818-310-255-G X F REEL 16.5 350 MKT 1818-310-255-F X W REEL 18.5 350 MKT 1818-310-255-W X — BULK — — MKT 1818-310-255 X *S = box size 55 x 210 x 340mm (W x H x L) Document Number 26009 Revision 10-Jun-02 For technical questions, contact [email protected] www.vishay.com 41 MKT 1818 100 7 5 3 2 V RMS V RMS Vishay Roederstein Metallized Polyester, Related Document: IEC 60384-2, CECC 30 400 Capacitance in µF 0.1 0.1 5 0.2 100 7 5 3 2 0.0 0.4 2 10 7 5 3 2 10 7 5 3 2 0.3 3 0.4 7 0.6 8 1.0 0.0 33 0.0 7 0.3 0 3 .2 0 47 2 .1 0. 1 8 1 103 2 3 5 7 104 2 5 7 105 3 2 5 7 106 3 102 2 3 5 7 103 2 3 5 7 104 2 3 f [Hz] 1000 7 5 3 2 Permissible AC Voltage versus Frequency V RMS Capacitance in µF 0.0 1 100 7 5 3 2 0.0 5 7 105 f [Hz] Permissible AC Voltage versus Frequency V RMS 06 Capacitance in µF 100 VDC 63 VDC 22 1000 7 5 3 2 Capacitance in pF 33 22 0.0 47 00 47 100 7 5 3 2 00 68 00 10 ,00 0 250 VDC 400 VDC 10 10 102 2 3 5 7 103 2 5 7 104 3 2 5 7 105 3 102 2 3 5 7 103 2 3 5 7 104 f [Hz] 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency V RMS 2 1000 7 5 3 2 Capacitance in pF 10 00 15 100 7 5 3 2 00 22 00 33 00 630 VDC 10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency www.vishay.com 42 For technical questions, contact [email protected] Document Number 26009 Revision 10-Jun-02