MPS MP2487DN High voltage white led driver evaluation board Datasheet

EV2487DN-00A
High voltage White LED Driver
Evaluation Board
The Future of Analog IC Technology
FEATURES
DESCRIPTION
The EV2487DN-00A is an evaluation board for the
MP2487DN, a step down converter designed for
driving up to 10 white LEDs in series with 330mA
current.
The MP2487 is a peak current mode control, fixed
frequency regulator to deliver a constant current
of up to 1A to high power white LEDs. Its low
200mV feedback voltage reduces power loss and
improves efficiency.
The wide 4.5V to 55V input range accommodates
a variety of step-down applications, making it
ideal for automotive, industry and general lighting
application.
The MP2487 is available in a SOIC8E package.
•
•
•
•
•
•
•
Wide 4.5V to 55V Operating Input Voltage
Drive up to 10 WLEDs in series of 330mA
Up to 200kHz programmable Switching
Frequency
130µA Quiescent Current
Up to 97.5% Efficiency
220mΩ Internal Power MOSFET
200mV reference voltage
APPLICATIONS
•
•
•
High Power white LED Driver
Automotive, Industry and General Lighting
Constant Current Source
ELECTRICAL SPECIFICATIONS
Parameter
Input Voltage
# of WLEDs
LED Current
Symbol
Value
Units
VIN
40 – 55
10 ( in series)
330
V
ILED
mA
“MPS” and “The Future of Analog IC Technology” are Registered
Trademarks of Monolithic Power Systems, Inc.
EV2487DN-00A EVALUATION BOARD
EV2487DN-00A
MP2487DN
(L x W x H) 2” x 1.8” x 0.4”
5.3cm x 4.6cm x 1.0cm
Board Number
EV2487DN-00A Rev. 0.1
1/26/2010
MPS IC Number
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
1
EV2487DN-00A – HIGHT VOLTAGE WHITE LED DRIVER EVALUATION BOARD
Efficiency vs. Input Voltage
10 WLED@330mA
EFFICIENCY(%)
100
98
96
94
92
90
30
35
40
45
50
55
60
INPUT VOLTAGE(V)
05/04, Rev. 1.0
www.MonolithicPower.com
2
EV2487DN-00A – HIGHT VOLTAGE WHITE LED DRIVER EVALUATION BOARD
EVALUATION BOARD SCHEMATIC
EV2487DN-00A BILL OF MATERIALS
Qty
Ref
Value
1
C8
82pF/50V
1
C1
100nF/50V
1
C9
4.7nF/50V
2
C6,C7
NS
3
C3,C5,C11
0.1µF/100V
1
C10
NS
2
C2,C4
2.2µF/100V
1
D1
1A/90V
1
2
1
1
U1
R2,R10
R8,R9
R6
MP2487DN_LF
0Ω
NS
20kΩ
1
R7
487kΩ
1
R1
NS
3
R3,R4,R5
1
L1
EV2487DN-00A Rev. 0.1
1/26/2010
Description
Cemaric
capacitor,50V,COG
Cemaric
capacitor,50V,X7R
Cemaric
capacitor,50V,X7R
Package
Manufacturer
0603
TDK
C1608COG1H820JK
0603
TDK
C1608X7R1H104K
0603
TDK
C1608X7R1H472K
0805
TDK
C2012X7R2A104K
1210
TDK
C3225X7R2A225K
SMA
TDK
B190A
SOIC8E
0603
MPS
Yageo
MP2487DN_LF
RC0603JR-070RL
Film, 1%
0603
Yageo
Film, 1%
0603
Yageo
RC0603FR-0720KL
RC0603FR074878KL
1.82Ω
Film, 1%
0805
Yageo
100µH
Inductor, 100µH,1.3A,
255mΩ
SMD
TOKO
Cemaric
capacitor,100V,X7R
Cemaric
capacitor,100V,X7R
schottky diode 90V,
1A
WLED Driver
Film, 5%
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
Manufacturer P/N
RC0805FR071R82L
DS106C2-B966BS101MP3
3
EV2487DN-00A – HIGHT VOLTAGE WHITE LED DRIVER EVALUATION BOARD
PRINTED CIRCUIT BOARD LAYOUT
Figure 1—Top Layer
EV2487DN-00A Rev. 0.1
1/26/2010
Figure 2—Bottom Layer
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
4
EV2487DN-00A – HIGHT VOLTAGE WHITE LED DRIVER EVALUATION BOARD
QUICK START GUIDE
1. Connect the positive and negative terminals of the WLED (10WLED in series) load to the LED+
and LED- pins on the EV board, respectively.
2. Connect the positive and negative terminals of the power supply (40V ~ 55V) to the VIN and
GND pins on the EV board, respectively. Turn the power supply on.
3. Drive EN pin high (VEN >1.7V) to enable the MP2487.
4. For PWM dimming mode, apply a PWM signal with high level greater than 1.7V to the EN pin.
The typical PWM frequency should be around 200Hz. The WLED brightness can be controlled
by the PWM dimming duty cycle.
NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third
party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not
assume any legal responsibility for any said applications.
EV2487DN-00A Rev. 0.1
1/26/2010
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
5
Similar pages