Aluminum Electrolytic Capacitors/ FM Radial Lead Type Series: FM Type :A Country of Origin Japan Malaysia China n Features Low impedance (40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105°C RoHS directive compliant n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -40 to + 105°C 6.3 to 50 V .DC 22 to 6800 µ F ±20 % (120Hz/+20°C) I < 0.01 CV (µA) after 2 minutes application of rated working voltage at +20°C W.V. 6.3 10 16 25 35 50 (max.) (120Hz/+20C°) tan δ 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000µF for products of 1000µF or more. tan δ After following life test with DC voltage and +105±2°C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified below. Duration φ5 to φ6.3: 2000 hours, φ8×11.5 to φ8×15: 3000 hours φ8×20 to φ10×16: 4000 hours, φ10×20 to φ12.5×20/ φ16×20: 5000 hours φ12.5×25 to φ12.5×35/ φ16×25: 7000 hours Endurance ±25% of initial measured value (6.3V to10V:±30%) < 200 % of initial specified value < initial specified value Capacitance change tan δ DC leakage current After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitor shall meet the limits specified in Endurance.(With voltage treatment) Shelf Life n Frequency correction factor for ripple current 6.3 to 50 Frequency(Hz) 120 1k 10k 0.90 0.55 0.75 0.95 0.70 0.85 0.98 0.75 0.90 1.00 0.80 0.95 Capacitance W.V.(V.DC) (µF) 22 47 390 1200 60 0.45 0.60 0.65 0.75 to 33 to 330 to 1000 to 6800 100k 1.00 1.00 1.00 1.00 n Dimensions in mm (not to scale) φ8> φ10< φd±0.05 P± 0.5 Vent P± 0.5 Sleeve L L <16:L+1.5max L >20:L+2.0 max 14 min Body Dia. φD 3min φD+0.5 max (mm) 5 6.3 8 10 Body Length L Lead Dia. φd Lead space P φD+0.5 max 12.5 16 12.5 to 25 30 to 35 0.5 0.5 0.6 0.6 0.6 0.8 0.8 2 2.5 3.5 5.0 5.0 5.0 7.5 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE79 Aluminum Electrolytic Capacitors/ FM n Case size VS Impedance W.V.(V.DC) 6.3 to Impedance Case size (φD×L) 5 × 11 (Ω /100kHz) 35 50 Ripple current Impedance Ripple current (mA.rms./100kHz) (Ω /100kHz) (mA.rms./100kHz) +20°C -10°C +105°C +20°C -10°C +105°C 0.300 1.000 280 0.340 1.130 250 11.2 0.130 0.430 455 0.140 0.460 405 8 × 11.5 0.056 0.168 950 0.061 0.183 870 6.3 × 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.038 0.114 1290 0.042 0.126 1170 10 × 16 0.026 0.078 1790 0.030 0.090 1650 10 × 20 0.019 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 0.022 0.055 2260 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE80 Aluminum Electrolytic Capacitors/ FM n Standard Products Case size W.V. (V) 6.3 10 16 Lead size Specification Min.Packaging Qíty Cap Ripple Impedance Endur- Lead Lead space Dia. Length current (100kHz) ance Dia. Taping (±20%) Straight (100kHz) (+20°C) i B iH (+105°C) (hours) ( m m ) ( m m ) (mm) (mm) (Ω) (µF) ( m m ) (mm) (m A ) 150 5 11 280 0.300 2000 0.5 2.0 330 6 11.2 455 0.130 2000 0.5 560 8 11.5 950 0.056 3000 0.6 820 8 15 1240 0.041 3000 0.6 Part No Long Lead Taping (pcs) (pcs) 5.0 2.5 EEUFM0J151 ( ) 200 2000 2.5 5.0 2.5 EEUFM0J331 ( ) 200 2000 3.5 5.0 EEUFM0J561 ( ) 200 1000 3.5 5.0 EEUFM0J821L( ) 200 1000 1200 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM0J122L( ) 200 1000 1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102 ( ) 200 500 1200 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122 ( ) 200 500 1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152 ( ) 200 500 2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L( ) 200 500 3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332 ( ) 200 500 5.0 EEUFM0J392 ( ) 200 500 EEUFM0J472L 100 3900 12.5 25 3190 0.015 7000 0.6 5.0 4700 12.5 30 3630 0.013 7000 0.8 5.0 5600 12.5 35 3750 0.012 7000 0.8 5.0 16 20 3300 0.017 5000 0.8 7.5 7.5 6800 16 25 3820 0.014 7000 0.8 7.5 7.5 100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 2.5 220 6 11.2 455 0.130 2000 0.5 2.5 5.0 470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J562L 100 EEUFM0J562S( ) 100 EEUFM0J682 ( ) 100 250 EEUFM1A101 ( ) 200 2000 250 EEUFM1A221 ( ) 200 2000 EEUFM1A471 ( ) 200 1000 680 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1A681L( ) 200 1000 1000 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1A102L( ) 200 1000 680 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681 ( ) 200 500 1000 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102 ( ) 200 500 1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122 ( ) 200 500 1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L( ) 200 500 2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222 ( ) 200 500 3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332 ( ) 200 500 3900 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1A392L 100 4700 12.5 35 3750 0.012 7000 0.8 5.0 3900 16 20 3300 0.017 5000 0.8 7.5 7.5 5600 16 25 3820 0.014 7000 0.8 7.5 7.5 68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 120 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 330 8 11.5 950 0.056 3000 0.6 3.5 5.0 470 8 15 1240 0.041 3000 0.6 3.5 680 8 20 1560 0.030 4000 0.6 3.5 470 10 12.5 1290 0.038 4000 0.6 680 10 16 1790 0.026 4000 0.6 1000 10 20 2180 0.019 5000 1200 10 25 2470 0.018 5000 1500 12.5 20 2600 0.018 5000 EEUFM1A472L 100 EEUFM1A392S( ) 100 EEUFM1A562 ( ) 100 250 EEUFM1C680 ( ) 200 2000 EEUFM1C121 ( ) 200 2000 EEUFM1C331 ( ) 200 1000 5.0 EEUFM1C471L( ) 200 1000 5.0 EEUFM1C681L( ) 200 1000 5.0 5.0 EEUFM1C471 ( ) 200 500 5.0 5.0 EEUFM1C681 ( ) 200 500 0.6 5.0 5.0 EEUFM1C102 ( ) 200 500 0.6 5.0 5.0 EEUFM1C122L( ) 200 500 0.6 5.0 5.0 EEUFM1C152 ( ) 200 500 250 When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm. The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE81 Aluminum Electrolytic Capacitors/ FM n Standard Products Case size W.V. (V) 16 25 35 50 Specification Lead size Cap Ripple Impedance EndurLead space Lead Dia. Length current (100kHz) ance Dia. Taping (±20%) Straight (100kHz) (+20°C) i B iH (+105°C) (hours) ( m m ) ( m m ) (mm) (mm) (Ω) (µF) ( m m ) (mm) (m A ) 5.0 Part No Min.Packaging Qíty Long Lead Taping (pcs) (pcs) EEUFM1C222 ( ) 200 500 EEUFM1C272L 100 2200 12.5 25 3190 0.015 7000 0.6 5.0 2700 12.5 30 3630 0.013 7000 0.8 5.0 3300 12.5 35 3750 0.012 7000 0.8 5.0 2700 16 20 3300 0.017 5000 0.8 7.5 7.5 3900 16 25 3820 0.014 7000 0.8 7.5 7.5 47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 100 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101 ( ) 200 2000 220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221 ( ) 200 1000 EEUFM1C332L 100 EEUFM1C272S( ) 100 250 EEUFM1C392 ( ) 100 250 EEUFM1E470 ( ) 200 2000 330 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1E331L( ) 200 1000 470 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1E471L( ) 200 1000 330 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331 ( ) 200 500 470 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471 ( ) 200 500 680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681 ( ) 200 500 820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L( ) 200 500 1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102 ( ) 200 500 1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152 ( ) 200 500 1800 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1E182L 100 2200 12.5 35 3750 0.012 7000 0.8 5.0 1800 16 20 3300 0.017 5000 0.8 7.5 7.5 2700 16 25 3820 0.014 7000 0.8 7.5 7.5 33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 2.5 EEUFM1E222L 100 EEUFM1E182S( ) 100 250 EEUFM1E272 ( ) 100 250 EEUFM1V330 ( ) 200 2000 68 6 11.2 455 0.130 2000 0.5 2.5 5.0 EEUFM1V680 ( ) 200 2000 150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151 ( ) 200 1000 220 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1V221L( ) 200 1000 330 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1V331L( ) 200 1000 220 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221 ( ) 200 500 330 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331 ( ) 200 500 470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471 ( ) 200 500 560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L( ) 200 500 680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681 ( ) 200 500 1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102 ( ) 200 500 1200 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1V122L 100 1500 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1V152L 100 1200 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S( ) 100 1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182 ( ) 100 250 22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220 ( ) 200 2000 2.5 250 56 6 11.2 405 0.140 2000 0.5 2.5 5.0 EEUFM1H560 ( ) 200 2000 100 8 11.5 870 0.061 3000 0.6 3.5 5.0 EEUFM1H101 ( ) 200 1000 120 8 15 1140 0.045 3000 0.6 3.5 5.0 EEUFM1H121L( ) 200 1000 180 8 20 1430 0.033 4000 0.6 3.5 5.0 EEUFM1H181L( ) 200 1000 When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm. The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE82 Aluminum Electrolytic Capacitors/ FM n Standard Products Case size W.V. (V) 50 Lead size Specification Ripple Lead space Lead ImpedEndurCap Dia. Length current ance Dia. ance Taping Straight (100kHz) (100kHz) (±20%) i B iH (+105°C) (+20°C) (hours) ( m m ) ( m m ) (mm) (mm) (Ω) (µF) ( m m ) (mm) (m A ) Part No Min.Packaging Qíty Long Lead Taping (pcs) (pcs) 150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 EEUFM1H151 ( ) 200 500 220 10 16 1650 0.030 4000 0.6 5.0 5.0 EEUFM1H221 ( ) 200 500 270 10 20 1890 0.023 5000 0.6 5.0 5.0 EEUFM1H271 ( ) 200 500 330 10 25 2150 0.022 5000 0.6 5.0 5.0 EEUFM1H331L( ) 200 500 470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 EEUFM1H471 ( ) 200 500 560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 EEUFM1H561 ( ) 200 500 680 12.5 30 3160 0.016 7000 0.8 5.0 EEUFM1H681L 100 820 12.5 35 3270 0.014 7000 0.8 5.0 EEUFM1H821L 100 16 20 2870 0.019 5000 0.8 7.5 7.5 EEUFM1H821S( ) 100 250 1000 16 25 3320 0.016 7000 0.8 7.5 7.5 EEUFM1H102 ( ) 100 250 When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm. The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE83