MPSA05/MMBTA05 MPSA05/MMBTA05 NPN General Purpose Amplifier 3 • This device is designed for general purpose amplifier applications at collector currents to 300mA. • Sourced from process 10. 2 SOT-23 1 Mark: 1H TO-92 1 1. Emitter 2. Base 3. Collector 1. Base 2. Emitter 3. Collector Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCEO Collector-Emitter Voltage Parameter Value 60 Units V VCBO VEBO Collector-Base Voltage 60 V Emitter-Base Voltage 4.0 IC Collector current V 500 mA TJ, Tstg Junction and Storage Temperature -55 ~ +150 °C - Continuous Electrical Characteristics TC=25°C unless otherwise noted Symbol Parameter Off Characteristics V(BR)CEO Collector-Emitter Breakdown Voltage * Test Condition Min. Typ. Max. Units IC = 1mA, IB = 0 60 V(BR)EBO Emitter-Base Breakdown Voltage IC = 100µA, IC = 0 4 V ICEO Collector Cutoff Current VCE = 60V, IB = 0 0.1 µA ICBO Emitter Cutoff Current VCB = 60V, IE = 0 0.1 µA V On Characteristics 100 100 hFE DC Current Gain IC = 10mA, VCE = 1.0V IC = 100mA, VCE = 1.0V VCE(sat) Collector-Emitter Saturation Voltage IC = 100mA, IB = 10mA 0.25 V VBE(on) Base-Emitter On Voltage IC = 100mA, VCE = 1.0V 1.2 V Small Signal Characteristics fT Current Gain Bandwidth Product IC = 10mA, VCE = 2V, f = 100MHz 100 MHz * Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2.0% Thermal Characteristics TA=25°C unless otherwise noted Symbol Parameter Max. MPSA05 625 5 PD Total Device Dissipation Derate above 25°C RθJC Thermal Resistance, Junction to Case 83.3 RθJA Thermal Resistance, Junction to Ambient 200 *MMBTA05 350 2.8 Units mW mW/°C °C/W 357 °C/W * Device mounted on FR-4 PCB 1.6” × 0.06" ©2002 Fairchild Semiconductor Corporation Rev. B1, November 2002 MPSA05/MMBTA05 Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. B1, November 2002 MPSA05/MMBTA05 Package Dimensions (Continued) ±0.10 ±0.10 2.40 0.40 ±0.03 1.30 0.45~0.60 0.20 MIN SOT-23 0.03~0.10 0.38 REF 0.40 ±0.03 +0.05 0.12 –0.023 0.96~1.14 0.97REF 2.90 ±0.10 0.95 ±0.03 0.95 ±0.03 1.90 ±0.03 0.508REF Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. B1, November 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1