Keysight Technologies Infiniium S-Series High-Definition Oscilloscopes Data Sheet The New Standard for Superior Measurements 02 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Welcome to the Next Generation of Oscilloscope Technology Infiniium S-Series oscilloscopes incorporate innovative technology designed to deliver superior measurements. Our new 10-bit ADC and low-noise front-end technology work together to provide up to 8 GHz performance with the industry’s best signal integrity. We put these in an advanced frame with a solid state drive for fast boot-up, capacitive 15” display for easy touch capability, and a high-powered motherboard for fast processing. It’s all compatible with a myriad of Keysight Technologies, Inc. probes and Infiniium applications. There is no better way to experience that superiority of the Infiniium S-Series oscilloscopes than to use one. Contact Keysight today to request a demo. Or visit, www.keysight.com/find/S-Series The Infiniium S-Series offers bandwidths from 500 MHz up to 8 GHz. Each model, equipped with a large 15” XGA capacitive touch screen, comes in a quiet package that is just 9” (23 cm) deep. DSO models 4 scope channels DSOS054A DSOS104A DSOS204A DSOS254A DSOS404A DSOS604A DSOS804A 1. MSO models 4 scope channels + 16 digital channels MSOS054A MSOS104A MSOS204A MSOS254A MSOS404A MSOS604A MSOS804A Scope channels Analog Max sample rate bandwidth 500 MHz 1 GHz 2 GHz 2.5 GHz 4 GHz 6 GHz 1 8 GHz 1 20 GSa/s (2 channels) 10 GSa/s (4 channels) ADC bits Standard memory depth User-installed bandwidth upgrades 10 100 Mpts (2 channels) 50 Mpts (4 channels) Yes 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported. 03 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet The New Standard for Superior Measurements Industry’s best signal integrity –– 10-bit ADC up to 8 GHz for additional vertical resolution –– Low-noise front end for precision signal viewing –– Only 90 uV noise at 1 mV/div and 1 GHz bandwidth –– System ENOB values in excess of 8 –– SFDR values down to –73 dBC –– 2 mV/div vertical scaling supported in hardware –– HW bandwidth limit filters on both 50 Ω and 1 MΩ paths –– Correction filters ensure flat frequency magnitude and phase response –– Low intrinsic jitter (100 fs (typical) for excellent jitter characterization) –– Precision BNCs with > 8 GHz bandwidth Most advanced platform –– Powerful, flexible Infiniium user interface –– Capacitive touch screen with multi-touch, easy-grab handles, and re-sizing touch fields –– Powerful Intel i5 motherboard with 8 GB RAM for fast processing –– Removable solid state drive (SSD) for fast boot-up and increased reliability and security –– Fast data offload (up to 200 MB/s) via USB 3.0 Broadest range of capability –– 16 digital channels on MSO models –– Standard feature rich software with > 50 automated measurements, 16 math functions, gating, and spectral viewer –– Expandable with optional software applications and flexible licensing: –– Add protocol decode and triggering for a wide variety of serial buses –– Choose from a large selection of analysis applications including eye diagrams and measurements with SDA, jitter, InfiniiScan, and de-embedding –– Test to ensure adherence to industry standards with compliance apps –– Support for > 100 probes – current and voltage, active and passive, 1 MΩ and 50 Ω inputs 04 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Industry’s Best Signal Integrity S-Series next-generation technology blocks enable superior measurements The heart of the oscilloscope is a 20-layer acquisition board with 16 custom ASICs and FPGAs. New technology blocks deliver superior signal integrity. You’ll get superior measurements that you won’t get with any other portable scope on the market. 10-bit ADC Each model incorporates the industry’s fastest 10-bit ADC with a sample rate of 40 GSa/s. This yields 2 channels at 20 GSa/s or 4 channels at 10 GSa/s. –– 4X more vertical resolution than 8-bit oscilloscopes –– ADC ENOB up to 8.7 contributes to high system ENOB values –– Up to 12 bits of resolution with high-res mode –– SNR are better than historical 8-bit ADC architectures –– Vertical scaling as low as 2 mV/div supported in hardware Keysight’s new 10-bit ADC –– 65 nm CMOS (9 mm x 14 mm) –– 130 nm BiCMOS buffer IC –– Custom 33 mm BGA package Superior low-noise front end –– 10-bit ADC’s usefulness is dependent on the low-noise front end that supports the additional quantization levels. Each S-Series oscilloscope incorporates the industry’s lowest noise front end for portable oscilloscopes with bandwidth up to 8 GHz –– 50 Ω and 1 MΩ input support, each path with bandwidth limit filter support –– Analog and DSP bandwidth limit filters to reduce unwanted noise –– 90 uV noise at 1 GHz bandwidth allows viewing of small signal detail –– 2 mV/div vertical scaling in hardware (in combination with ADC) –– HW bandwidth limit filters on both 50 Ω and 1 MΩ paths –– Gold-plated precision BNCs rated in excess of 8 GHz bandwidth –– Electronic attenuators for decreased noise and increased reliability –– Lower bandwidth models are upgradable to any higher bandwidth model with an instant user-installed software license S-Series front-end includes three new custom ICs including a 130 nm BiiCMOS IC that incorporates user-selectable analog filters and bandwidth upgrades via a software license. 05 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Industry’s Best Signal Integrity (Continued) S-Series next-generation technology blocks enable superior measurements (Continued) Superior time base Time scale accuracy is critical, especially for deep-memory applications. Measurement of jitter is necessary for ensuring high-speed system reliability. Intrinsic jitter associated with an oscilloscope includes the jitter measurement internal to the scope. The lower the value, the better you’ll be able to characterize your device. S-Series scopes achieve precise time accuracy with a next-generation time base architecture. –– Best-in-industry time scale accuracy of 12 parts per billion after calibration for accurate deep-memory measurements –– Low jitter measurement floor with 100 fs (typical) of intrinsic jitter Signal processing in hardware S-Series oscilloscopes are built with an advanced FPGA dedicated for fast and precise signal processing. The technology produces the fastest deep memory responsiveness in the industry and provides additional hardware filtering for superior measurements. –– Hardware-based algorithms for accelerated drawing to display (pixel placement) enable fast pan and zoom even with deep memory –– Frequency-response correction filters produce flat responses for both magnitude and phase for more accurate waveforms –– User-selectable hardware bandwidth-limiting correction filters from 500 MHz up to the oscilloscope’s bandwidth reduce unwanted noise, plus additional front end filters for even more bandwidth limiting options –– Supports cabled 2-channel differential inputs (channels 1 to 3 or channels 2 to 4) without requiring a differential probe –– The DSP technology block supports rapid optional de-embedding technologies such as InfiniiSim, Precision Probe, and equalization Responsive deep memory S-Series oscilloscopes come with the industry’s most responsive deep memory. With standard 50 Mpts/channel on all four channels simultaneously, capture long time periods while retaining fast sample rates. Fast update rates mean your oscilloscope will stay responsive with deep memory on to ensure precise representation of analog signals. 06 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Most Advanced Platform S-Series next-generation technology enables superior measurements S-Series platform standard features 240 GB removable SSD –– Fast boot up –– Increased reliability –– Easy to remove for secure environments Powerful motherboard –– 3 GHz Intel i5 quad core processor with 8 GB RAM for fast computations — even with advanced math and deep memory –– IO –– Ethernet 10/100/1000bT –– 6 USB device ports (2 in front, 4 on side two of which are USB 3.0) –– DisplayPort and VGA video out. Drivers support up to two simultaneous displays Fast data offload Have an application that requires programmatically accessing oscilloscope data? –– USB 3.0 for up to 200 MB/s offload –– 1000bT Ethernet for up to 80 MB/s offload Touch-screen innovation S-Series oscilloscopes incorporate a capacitive touch screen. In addition, Infiniium software includes a large number of touchfriendly enhancements including handles, enlarged touch fields when touch is enabled, and gestures (multi-touch). Fast offload 07 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview With up to 8 GHz bandwidth, 20 GSa/s sample rate, a 10-bit ADC, and a low-noise front-end, see a precise representation of the analog characteristics of the signals you’re testing. Noise directly impacts vertical placement of each signal point. Oscillocopes with lower noise have more accurate vertical placement. S-Series oscilloscopes incorporate next-generation technology to deliver the lowest noise measurements in the industry. Here’s a compare at 4 GHz with 5 mV/div scaling. Superior signal integrity allows for more accurate measurements such as rise time values. Extremely low intrinsic jitter (100 fs) ensures the lowest possible contribution to jitter measurements from the scope itself so you’re using your jitter budget on your design. 08 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – Time Domain Display windows and scale annotations Both horizontal and vertical axis values are annotated on the scales, leading to fast interpretation. Infiniium oscilloscopes uniquely offer 16 grids per waveform area, with up to 8 waveform areas. Results window See up to 20 measurement results simultaneously with statistics. Each result is color-coded to the source. Turn on measurement annotations for additional documentation capability. Math and measurements With > 50 standard automated measurements with statistics and 16 independent math functions, you’ll be able to analyze a wide variety of tests. Use any of the industry-best 16 independent gates to narrow measurements or math to a specific time window. 09 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – Frequency Domain With a built-in spectral viewer, controls, gated FFTs, 10-bit ADCs, and excellent SFDR values, the S-Series oscilloscopes provide an excellent scope platform for FFT measurements. FFTs Need to see frequency domain in additional to time domain? The standard spectral viewer includes FFT controls like start/stop RBW and CF/span. Readout includes power and frequency axis annotation and a peak table. Gated FFTs Infiniium supports gated math and analysis including FFTs. Use any of the standard 16 independent gates to narrow FFT computations to a specific time window. Drag the gate in the time domain, and see time correlated FFT measurements for specified time periods. The example at the right shows two simultaneously FFTs. Envelope measurements Need to see the rise time of a burst? Add a rise time measurement to an envelope function that provides an AM demodulation of a burst. 10 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – Frequency Domain (Continued) Wideband and multi-channel FFTs Need to see > 500 MHz signal spectral bandwidth and/or multiple FFTs simultaneously? Oscilloscopes offer wider bandwidth than spectrum analyzers and come standard with four ports (channels) per instrument. Number of channels Infiniium S-Series enables users to make wideband measurements up to 8 GHz and up to 16 simultaneous FFTs. Analyze even higher bandwidth signals by combining with a down converter. Up to 4 S-Series 8 GHz 90000A Series V-Series Z-Series 33 GHz 63 GHz 13 GHz 1 PXA UXA 160 MHz 510 MHz 0 MHz BW 160 MHz BW 500 MHz BW 8 GHz BW 13 GHz BW 33 GHz BW ... 63 GHz RF signal spectral bandwidth Use Infiniium capture and analysis of radar bursts, as shown in this OFDM example. Use Infiniium capture and analysis of radar bursts, as shown in this OFDM example. 11 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – Frequency Domain (Continued) Trying to interpret traditional oscilloscope time-domain specifications can be challenging in determining if a specific scope can be recommended for RF/uW/mmW measurements. With correction filters, low-noise front end, and the 10-bit ADC, S-Series oscilloscopes can be used for wideband RF applications. Typical RF characteristics for the S-Series are listed below with graphs showing characterization results shown at the bottom of the page. Typical RF characteristic values from measured results on an 8-GHz S-Series oscilloscope Sensitivity/noise density –– 1 mV/div; —38 dBm range –– Power spectral density measurement at 1.0001 GHz, 1.0001 GHz center frequency, 500 kHz span, and 3 kHz RBW Noise figure –– Derived from measurement above Signal-to-noise ratio/dynamic range –– 0 dBm 1 GHz input carrier, 0 dBm scope input range –– 1 GHz center frequency, 100 MHz span, 1 kHz RBW, measurement at +20 MHz from center Absolute amplitude accuracy –– 0 to 7.5 GHz Deviation from linear phase –– 0 to 7.5 GHz Phase noise (at 1 GHz) –– 10 kHz offset –– 100 kHz offset EVM –– 802.121 2.4 GHz carrier, 20 MHz wide, 64 QAM Spurious responses (0 dBm signal, 0 dBm input range) Spur Free Dynamic Range (SFDR) –– 1 GHz, 0 dBm signal present at input, FFT =5 GHz span, 3 GHz center, 100 kHz RBW 2nd harmonic distortion –– 1 GHz input, 0 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW 3rd harmonic distortion –– 1 GHz input, 0 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW Two-tone Third-Order Intermodulation (TOI) distortion –– 0 dBm input tones, 2.435 GHz and 2.439 GHz, 2 MHz separation, 2.437 GHz center frequency, 10 MHz span, 100 kHz RBW, 6 dBm input range Input match –– < 50 mV/div, 0-7 GHz –– >= 50 mV/div, 0-7 GHz Using data acquired from S-Series, VSA shows an excellent TOI value of 21.5 dB. —160 dBm/Hz 14 dB 108 dB ± 1 dB ± 7 deg —121 dBc/Hz —122 dBc/Hz —47 dB (0.47%) 72 dB —64 dBc —46 dBc +21.5 dB —15 dB; 1.4 VSWR —19 dB; 1.25 VSWR Using data acquired from S-Series, VSA shows an EVM for IEEE 802.11 QAM 64 of 0.47%. 12 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – User Interface Infiniium oscilloscopes have been consistently recognized for high usability. The next-generation Infiniium user interface that ships standard on S-Series oscilloscopes delivers even more capability. Personalized viewing –– Determine how much space to give to results versus waveforms using sliders –– Undock and move a window to an external monitor using the tabbed layout –– Easily scale and see independent waveforms with userselectable 1, 2, 4, or even 16 simultaneous grids in each waveform window Faster and better documentation –– Quickly determine horizontal and vertical values as they are prominently displayed –– Add annotations using bookmarks, measurement callouts, and dynamic delta marker readouts –– Right-click to copy image without ever having to save to a file –– Use the multi-purpose button to save screen images easily with auto-incrementing file names –– Quickly save all waveforms, memories, functions, and setups in a single .osc file for later recall on an oscilloscope or PC –– Save screen images as .jpg, .png, .gif, or .tiff Best usability, including touch screen Extensive research testing led to several touch-screen innovations not found in other oscilloscopes. All the following are industry firsts. –– Click once to see handles that enable touch manipulation of markers, trigger level, and waveform-tasks that previously required a mouse –– Multi-touch support for multi-touch (gestures) such as zooming and panning –– Auto-sizing when touch button is turned on/off optimizes fields for fingers or a mouse 13 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Oscilloscope Overview – User Interface (Continued) Custom mask editor Drag and drop up to 15 points on screen to create mask files in seconds. Analysis gallery Easily find and run the test you need from the list of analysis/ measurement options represented graphically in the analysis gallery. 14 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Using an External Monitor Undock and move a window to an external monitor using tabbed layout. S-Series supports both VGA and DisplayPort IO. Infiniium Offline Application View and analyze results at your desk. Save your oscilloscope file, then view and analyze on your PC without needing additional access to your scope. Use waveform math, filtering, and FFT spectral analysis and to get more insight. Need to see protocol decode, analyze jitter, or view eye diagrams? Infiniium Offline helps you get insight into all of these areas. 15 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet MSO Overview MSO models add 16 high-speed timing channels with standard 128 Mpts digital memory, allowing you to retain fast 2 GSa/s sample rates over long periods of time. All DSOs are user-upgradable to MSOs. The required upgrade time is less than 5 minutes. Use the digital channels to evaluate control signal relationships and data buses up to 16 bits wide. Use symbols to quickly interpret waveforms. MSO measurement applications –– Trigger on and view specific control or data flow events –– Use digital channels for protocol trigger and decode (I²C, SPI, RS-232, JTAG, USB and more) –– Capture data from FPGA debug ports –– Trigger on and monitor power rail sequencing timing relationships –– Combine with oscilloscope channels to trigger across up to 20 channels simultaneously 16 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Protocol Applications Does your design include a serial bus that is a key point for debug or test? Use one of Keysight’s protocol decoding and triggering application packages for increased productivity. The software converts DSO or MSO physical layer acquisitions into packets for specific protocols. Specify trigger conditions at the packet level. Quickly move between physical and protocol layer information using the time-correlated tracking marker. Display protocol content in waveforms and/or listing. Optional application description Protocol 8B/10B ARINC 429 and MIL-STD-1553 protocol CAN, LIN, FlexRay protocol decode and triggering DVI HDMI I²C, SPI, and RS-232/UART protocol decode and triggering I²C/SPI protocol decode JTAG protocol decode MIPI® CSI-3 (M-PHY®) protocol decode MIPI DigRF v4 MIPI D-PHY™ protocol decode MIPI LLI protocol decode MIPI RFFE protocol decode MIPI UniPro protocol decode PCI Express® Gen1 and Gen2 protocol decode and triggering RS-232/UART protocol decode and triggering SATA/SAS protocol decode SVID protocol decode USB 2.0 protocol decode and triggering USB 3.0 protocol decode USB 3.0 SuperSpeed Inter-Chip (SSIC) protocol decode 1 10/100 Ethernet protocol triggering and decode USB 3.1 protocol triggering and decode USB-PD protocol triggering and decode Universal Flash Storage (UFS) protocol decode eSPI and Quad eSPI protocol decode and trigger CAN, LIN, FlexRay and CAN-FD protocol triggering and decode Upgrade CAN, LIN, FlexRay with CAN-FD 1. License type Fixed Factory-installed on new scope purchase or user-installed on existing scope Floating User-installed transportable license Server-based license (N5435A option) N5384A-1FP N/A N8803B-1FP N5384A-1FP N5384A-1FP N8800B-1FP N5391B-1FP N8817B-1FP N8820B-1FP N8807B-1FP N8802B-1FP N8809B-1FP N8824B-1FP N8808B-1FP N5463B-1FP N5462B-1FP N8801A-1FP N8812B-1FP N5464B-1FP N8805B-1FP N8819B-1FP N8825B-1FP N8821A-1FP N8837A-1FP N8818B-1FP N8835A-1FP N8803C-1FP N8803C-2FP N5384A-1TP N8842A-1TP N8803B-1TP N5384A-1TP N5384A-1TP N8800B-1TP N5391B-1TP N8817B-1TP N8820B-1TP N8807B-1TP N8802B-1TP N8809B-1TP N8824B-1TP N8808B-1TP N5463B-1TP N5462B-1TP N8801A-1TP N8812B-1TP N5464B-1TP N8805B-1TP N8819B-1TP N8825B-1TP N8821A-1TP N8837A-1TP N8818B-1TP N8835A-1TP N8803C-1TP N8803C-2TP 003 106 033 003 003 N/A 006 038 N/A 047 036 049 072 048 032 001 035 054 034 N/A N/A 088 092 096 063 091 103 N/A The server license runs on an external PC and can be checked out for 90 days by connecting to the server from the GUI. The floating or transportable license is moved from scope to scope using KLM and can be done online or with USB thumb drive. 17 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Analysis Applications A variety of analysis capabilities enable additional rapid insight InfiniiScan Rapidly trigger on complex events that you can see but are impossible to specify using hardware triggers. This innovative software quickly scans through thousands of acquired waveform cycles and isolated anomalous signal behavior. Select up to eight zones across scope channels are available. SDA (Serial Data Analysis) Quickly validate signal integrity for high-speed serial interfaces with embedded clocks. Recover embedded clocks, and build and validate eye diagrams. SDA also includes software-base trigger and decode for 8B/10B data. EZJIT, EZJIT Plus, and EZJIT Complete Characterize and evaluate most commonly needed jitter measurements. EZJIT Plus automates Rj/Dj separation, and EZJIT Complete additionally characterizes vertical noise. See jitter data sheets for additional information. 18 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Analysis Applications (Continued) A variety of analysis capabilities enable additional rapid insight (Continued) Crosstalk analysis Quickly solve difficult crosstalk problems with the industry’s first application software designed to measure both near end crosstalk (NEXT) and far end crosstalk (FEXT) on up to four signals (one victim and three aggressors) at once. –– Identify the aggressor and victim –– Report the amount of crosstalk –– Remove crosstalk and analyze PAM-4 analysis Easily make eye and level based measurements with the PAM-4 analysis tool. Measure eye width, eye height, eye skew, level mean, RMS, and thickness for each level, plus: –– Data time interval error for each threshold –– Rise/Fall times for each of the six PAM-4 transition types –– Support for CTLE, FFE, and DFE equalization –– Bit error rate measurements – cumulative and per acquisition 19 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Analysis Applications (Continued) A variety of analysis capabilities enable additional rapid insight (Continued) PAM-4 analysis (Continued) With the EZJIT and InfiniiScan applications, you can apply limit tests to find burst errors and view where errors happen on the waveform. 20 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Analysis Applications (Continued) A variety of analysis capabilities enable additional rapid insight (Continued) MultiScope View up to 40 analog channels simultaneously by linking multiple scopes together. Connect 2, 5, or 10 scopes together and calibrate to eliminate skew. 21 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Other Popular Applications National Instrument Drivers LabVIEW Plug and Play and IVI-C drivers for S-Series are available on ni.com/idnet Vector Signal Analysis Expand your oscilloscope with the 89601B vector signal analysis software. This application takes data from the scope and provides spectrum analysis and digital modulation analysis for wireless communication. MATLAB integration with User Defined Functions Install MATLAB on your oscilloscope, and add your favorite .m scripts as math function operators. Export and analyze oscilloscope data directly with MATLAB. The FFT waterfall spectrogram on the right is an example of processing that can be done in MATLAB. Order N8831A with option 001 for MATLAB Basic or option 002 for MATLAB advanced. Optional application description Analysis DSA (bundle with EZJIT Complete and SDA bundle) Equalization emulation EZJIT EZJIT Plus EZJIT Complete vertical noise analysis InfiniiScan Infiniisim Basic InfiniiSim Advanced OSA (Oscilloscope Signal Analyzer) Power PrecisionProbe Serial data analysis UDF (user-defined function for MATLAB integration) User Defined Functions Crosstalk analysis PAM-4 MultiScope –– 2 scopes –– 5 scopes –– 10 scopes License type Fixed Floating Factory-installed on new scope purchase User-installed or user-installed on existing scope transportable license Server-based license (N5435A option) DSOS000-DSA (new purchase only) N5461B-1FP E2681B-1FP N5400B-1FP N8823B-1FP N5415B-1FP N5465B-3FP N5465B-1FP W2650A U1882B-1FP N2808A-1FP N5384A-1FP N5430B-1FP N8833B-1FP N8833B-1FP N8836A-1FP N/A N5461B-1TP E2681B-1TP N5400B-1TP N8823B-1TP N5415B-1TP N5465B-3TP N5465B-1TP N/A U1882B-1TP N2808A-1TP N5384A-1TP N5430B-1TP N8833B-1FP N8833B-1FP N8836A-1TP 003 and 055 026 002 001 067 004 026 027 N/A N/A 044 003 005 084 084 094 N8834A-AFP N8834A-BFP N8834A-CFP N8834A-ATP N8834A-BTP N8834A-CTP 085 086 090 22 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Standard Features 15” XGA display makes it easier to view analog and digital signals as well as spectral and protocol views Capacitive display makes for responsive touch control and supports multi-touch gestures View: Up to 8 waveform windows. Each area can have up to 16 grids Drag and drop enables rapid measurements Measurements –– Over 50 automated measurements –– View up to 20 simultaneously –– User-customizable result window –– (size, position, and information) –– X and Y markers with dynamic delta values Analyze –– 20 math operators including FFT and filters –– Up to 16 independent/cascaded math functions View windows: Analog, math, spectral, and measurement results (simultaneous, tabbed, or undocked) Built-in 10-MHz reference in/out ports synchronizes multiple measurement instruments in a system XGA and DisplayPort video output ports let you add an external monitor Standard USB 2.0 and 3.0 and LAN ports provide fast data offload, device support, and connectivity Trig in/out ports provide an easy way to synchronize your oscilloscope to other instruments Mixed-signal oscilloscope (MSO) models seamlessly integrate four analog scope channels with 16 digital channels 23 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Dedicated single acquisition button provides better control to capture a unique event Pressing horizontal delay knob sets the delay to zero Zoom button provides quick access to two screen-zoom modes Responsive deep memory allows you to pan and zoom quickly Autoscale lets you rapidly display any analog or digital active signals, automatically setting the vertical, horizontal and trigger controls for the best display, while optimizing memory Digital channel button provides quick setup access Protocol decode button enables quick setup access Dedicated per-channel front panel controls make it easy to access the vertical and horizontal scaling and offset Quick access to fine/course control by pressing the horizontal and vertical sensitivity knobs Built-in USB ports makes it easy to save your work and update your system software quickly Gold-plated precision BNCs deliver > 8 GHz bandwidth through the connector AutoProbe interface automatically configures the attenuation ratio of the probe and provides probe power for Keysight’s active probes 24 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Compliance Applications Need to test adherence to an industry-standard serial bus? The S-Series supports many compliance applications. License type Fixed Floating User-installed Optional application description Factory-installed on transportable license new scope purchase or user-installed on existing scope Compliance (see individual application data sheets for additional information) BroadR-Reach N6467B-1FP N6467B-1TP DDR bundle - includes DDR1, 2, 3 and 4 N5459B-1FP N/A DDR1 (200 to 1067 MT/s) U7233B-1FP U7233B-2FP DDR2 + LPDDR2 (400 to 1067 MT/s) N5413C-1FP N5413C-1TP DDR3 + LPDDR3 (800 to 1067 MT/s) U7231C-1FP U7231C-1TP eMMC N6465B-1FP N6465B-1TP Ethernet N5392C-3FP N5392C-3TP Ethernet + EEE N5392C-1FP N5392C-1TP 10 GBase-T U7236B-1FP U7236B-1TP HDMI 1.4 N5399D-3FP N5399D-3TP MHL 2.0 N6460C-3FP N6460C-3TP MIPI D-PHY U7238D-1FP U7238D-1TP U7249D-1FP U7249D-1TP MIPI M-PHY® MOST N6466B-1FP N6466B-1TP PCI Express Gen1 N5393E-3FP N5393E-3TP UDA (User-Defined Application) N5467C-1FP N5467C-1TP UHS-I N7246B-1FP N7246B-1TP UHS-II N6461B-1FP N6461B-1TP USB 2.0 N5416B-1FP N5416B-1TP HSIC U7248C-1FP U7248C-1TP XAUI N5431B-1FP N5431B-1TP Need to additionally test even higher-speed serial buses? Consider Keysight’s Z-Series, 90000A Series, or V-Series. Server-based license (N5435A option) N5435A-062 N/A N5435A-021 N5435A-037 N5435A-053 N5435A-061 N5435A-008 N5435A-060 N5435A-023 N5435A-011 N5435A-050 N5435A-022 N5435A-043 N5435A-068 N5435A-040 N5435A-058 N/A N5435A-052 N5435A-017 N5435A-042 N5435A-018 Minimum bandwidth (GHz) 1 1 to 4 2 to 4 4 1 1 1 2.5 8 8 4 6 1.5 6 0.5 1 6 2 2 6 25 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Probes Overview S-Series oscilloscopes include both 1 MΩ and 50 Ω paths. This expands their flexibility by making them compatible with a wider range of probes than high-performance oscilloscopes that only support a 50 Ω path. All S-Series oscilloscopes ship standard with four passive probes and support a wide range of about 100 compatible current and voltage probes. The table below highlights probes commonly used with the S-Series. See http://literature.cdn.keysight.com/litweb/pdf/5968-7141EN.pdf for additional info on probes andaccessories. Probe type Passive probe InfiniiMax active probe Ideal for measuring Single-ended voltage up to 500 MHz Differential or single-ended voltage Differential, single-ended or common mode voltage InfiniiMode active probe Single-ended, differential, or common mode voltage Single-ended active probe Single-ended voltage up to 2 GHz General purpose differential probes High voltage differential signal up to 7 kV with high CMRR Current probe High current, AC/DC (mA – 100’s of A) High sensitivity current, AC/DC (10’s of uA – A) Passive probes High voltage up to 4 kV peak pulse General purpose up to 1.5 GHz Power rail probe Single-ended up to 2 GHz with up to ± 24 V offset Recommended probe model numbers N2873A (qty. 4 ship standard) 1130A/31A/32A/34A, 1168A/69A N2830A/31A/32A (InfiniiMode) N2750A-52A N2795A, N2796A, N2797A (extreme temperature) N2790A, N2791A, N2818A, N2819A, N2891A 1146B, 1147B, N2780B-83B, N2893A N2820A, N2821A 10076B N2870A – N2876A N7020A 26 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Probes and Accessories Overview N7020A power rail probe Do you need more offset than is available in your oscilloscope frame? Do you need to zoom in to view and analyze small signals like ripple on top of power rails? Do you need more input impedance than 50 Ω at DC to make more precise measurements? If so, the N7020A power rail probe has the feature set that will help you test more efficiently and precisely. Developed specifically for power rail testing needs, the probe delivers 850 mV dynamic range with an impressive offset range of ± 24 volts. Low noise with a 1:1 attenuation ratio and 2 GHz bandwidth and low DC loading complements the probes ability to deliver superior power rail measurements. Go to www.keysight.com/find/N7020A for additional information. N2750A Series InfiniiMode active probes These active probes offer 1.5/3.5/6 GHz bandwidth and InfiniiMode operation modes and provide convenient and quick access to various functions on the oscilloscope. With wide dynamic range (10 Vpp at 10:1) and offset range (± 15 V), these probes can be used for a vast variety of measurements. Go to www.keysight.com/find/InfiniiMode for additional information. N2820A Series high-sensitivity current probes Need to measure small currents? The N2820A Series highsensitivity current probes can measure down to 50 uA and up to 5 amps. Combine with the S-Series for lower noise and 10-bit ADC high-definition current measurements. This probe can also be used to measure sensitive low voltages down to 3 uV. Go to www.keysight.com/find/N2820A for additional information. 27 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Keysight Portfolio Compare Available bandwidths Standard memory depth/ch (2-ch) ADC bits Bandwidth filters InfiniiVision 6000 X-Series Fastest update rate and lowest price up to 6 GHz 500 MHz to 6 GHz 4 Mpts 8 Yes Bandwidth correction filters Probe inputs Motherboard and OS Standard internal drive BNC inputs MSO models Frame volume comparison No 50 Ω and 1 MΩ None. Embedded None Traditional Yes 1/2 X Family Optimized for Infiniium 9000 Series Measurements up to 4 GHz 600 MHz to 4 GHz 40 Mpts 8 20 MHz (only on 1 MΩ input) No 50 Ω and 1 MΩ Intel Core 2 Duo. Win7 HDD Traditional Yes X Infiniium S-Series blends high-performance oscilloscope capability with a wide range general-purpose features. S-Series Superior signal integrity up to 8 GHz 500 MHz to 8 GHz 100 Mpts 10 Yes. Extensive 90000A Series Superior signal integrity up to 13 GHz 2.5 to 13 GHz 40 Mpts 8 Yes. Extensive Yes 50 Ω and 1 MΩ Intel i5 Quad-Core. Win7 Removable SSD Precision BNC Yes X Yes 50 Ω Intel Core 2 Duo. Win7 HDD Precision BNC No 2X 28 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Accessories Quickly remove your solid state drive for additional security All S-Series models ship standard with a solid state drive. This gives you faster boot time, enhanced reliability, and the ability to quickly remove the solid state drive for safekeeping in secure environments. Need additional solid state drives for secure environments? N2746S provides an additional solid state drive with Windows 7. Need to ship your oscilloscope or take it on an airplane? Cruzer has created a custom case for Keysight’s Infiniium S-Series oscilloscopes. Order the rugged hard-shell transit case directly from Cruzer (http://www.casecruzer.com/ oscilloscope/3f1312-0411j.html) using the product number 3F1312-0411J. Shipping weight with an S-Series frame and no accessories is 51.5 lbs (23.4 kg). Rack mount your oscilloscope Mount your S-Series oscilloscope in an 8U high, 19” (487 mm) wide rack with the N2902B rack mount kit. The sturdy kit provides additional BNCs on the rack mount front panel for BNC in/out signals on the side of S-Series models. 29 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Take a Quick Look Using Demo Wizard and USB Demo Board Evaluate using demo wizard waveforms We’ve captured a variety of signals and measurements to speed your evaluation of S-Series oscilloscopes. Use the demo wizard to quickly evaluate the scope’s capability without needing to create an array of live signals. Measurement examples For example, pull up an FFT and note the following: separate spectral viewer with annotated axis scales; dynamically updated X and Y marker delta values; a customizable results window that includes an FFT peak table. N2867A USB demo board Plug a mouse, USB drive, or any other device in one side and connect the other to your oscilloscope USB port. You now have easy access to a target for quick evaluation or training others on how to use the scope. The board routes out D+, D-, 5 V, and ground, so you can use it to make voltage, current, power, or other measurements. 30 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Investment Protection Expand your oscilloscope’s capability with additional memory, bandwidth, digital channels, or software applications. Capture more time and keep faster sample rates as horizontal settings are slowed. Additional acquisition memory can be added to the initial purchase or after purchase. All S-Series oscilloscopes ship with the same hardware and are calibrated to 8 GHz on the production line. In less than 1 minute, any lower-bandwidth S-Series scope can be user-upgraded to any higher bandwidth. Acquisition memory depth upgrade Option # on new scope Increase to 100 Mpts/200 Mpts (4-ch/2-ch) Increase to 200 Mpts/400 Mpts (4-ch/2-ch) Increase to 400 Mpts/800 Mpts (4-ch/2-ch) DSOS000-100 DSOS000-200 DSOS000-400 DSOS8GBW DSOS6GBW DSOS4GBW DSOS2G5BW DSOS2GBW DSOS1GBW N2113A Option # (for previously purchased scopes) 100 200 400 Bandwidth upgrades Upgrade to 8 GHz bandwidth Upgrade to 6 GHz bandwidth Upgrade to 4 GHz bandwidth Upgrade to 2.5 GHz bandwidth Upgrade to 2 GHz bandwidth Upgrade to 1 GHz bandwidth Note: Customer-installable calibration is recommended and incurs additional charges. Upgrade any DSO model to an MSO in less than 1 minute with the N2901E MSO upgrade kit. 31 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet S-Series Ordering Configuration S-Series ordering configuration 1. 2. 3. 4. 5. Choose needed bandwidth Choose MSO or DSO Choose desired software applications Choose memory depth upgrade Choose any additional probes and accessories DSO models 4 scope channels DSOS054A DSOS104A DSOS204A DSOS254A DSOS404A DSOS604A DSOS804A MSO models 4 scope channels + 16 digital channels MSOS054A MSOS104A MSOS204A MSOS254A MSOS404A MSOS604A MSOS804A Calibration and accessory options Precision BNC (M) to SMA (F) adapters (qty 2) (standalone PN: 54855-67604) 170225 compliant calibration 17025 compliant calibration with accreditation ANSI Z540 complaint calibration S-Series rackmount kit (8U high) Additional SSDs with Win7 GPIB to LAN adapter Scope channels Analog Max sample rate bandwidth ADC bits 500 MHz 1 GHz 2 GHz 2.5 GHz 4 GHz 6 GHz 1 8 GHz 1 10 20 GSa/s (2 channels) 10 GSa/s (4 channels) DSOS000-821 DSOS000-1A7 DSOS000-AMG DSOS000-A6J N2902B N2746S N4865A Standard memory depth User-installed bandwidth upgrades 100 Mpts (2 channels) 50 Mpts (4 channels) Yes 1. 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported. 2. For MSO upgrades, customer-installable calibration is recommended and incurs additional charges. Standard accessories Included All models ship standard with: 3-year warranty, four N2873A 500-MHz passive probes, probe accessory pouch, Keysight I/O libraries suite, localized power cord, front panel cover, 8 GHz BNC calibration cable, keyboard, and mouse. User guide and programmer’s guide ship on oscilloscope drive. Service guide available on Keysight.com. MSO models additionally ship with 16-channel flying lead set logic probe, MSO cable, and MSO calibration fixture. 32 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics Vertical DSO/MSO models Vertical - scope channels Input channels Analog bandwidth (–3 dB) Vertical resolution 2, 3 Typical rise time/fall time 10 to 90% 4 Typical rise time/fall time 20 to 80% 5 ENOB (typical) Input impedance 1 S-054A 50 Ω 1 1 MΩ S-104A S-404A S-604A S-804A DSO models - 4 analog MSO models - 4 analog + 16 digital 500 MHz 1 GHz 2 GHz 2.5 GHz 500 MHz 500 MHz 500 MHz 500 MHz 10 bits, up to 12 bits with high-resolution mode 860 ps 430 ps 215 ps 172 ps 4 GHz 500 MHz 6 GHz 6 500 MHz 8 GHz 6 500 MHz 107.5 ps 71.7 ps 53.8 ps 620 ps 77.5 ps 51.7 ps 33.8 ps 310 ps S-204A 155 ps S-254A 124 ps 8.1 7.8 7.5 7.4 7.2 6.8 6.4 50 Ω: ± 3.5% (typical ± 1% at 25 °C) 1 MΩ: ± 1% (14 pF typical) 50 Ω: 1 mV/div to 1 V/div Input sensitivity 3 1 MΩ: 1 mV/div to 5 V/div Input coupling 50 Ω: DC 1 MΩ: AC (> 11 Hz), DC Bandwidth limit filters (analog) 20 MHz, 200 MHz for both 50 Ω and 1 MΩ paths DSP bandwidth limit filters Increments of 500 MHz up to rated scope bandwidth Channel-to-channel isolation DC to 100 MHz: 50 dB 100 MHz to 1 GHz: 40 dB > 1 GHz: 30 dB ± 1% of full scale at full resolution (typical 5 mV to 1 V per division) DC gain accuracy 1, 2, 3 ± 2% of full scale at full resolution 1 1 Max input voltage 50 Ω: ± 5 V 1 MΩ: 300 Vrms or DC and ± 400 Vpp (DC+AC) Offset range 50 Ω 1 MΩ Vertical sensitivity Available offset Vertical sensitivity Available offset All vertical ranges ± 12 divisions or ± 4 V, < 10 mV/div ±2V whichever is smallest ≥ 10 mV/div ±5V ≥ 20 mV/div ± 10 V ≥ 100 mV/div ± 20 V ≥ 1 V/div ± 100 V ± 0.1 div ± 2 mV ± 1% of offset setting for offsets < 2 V Offset accuracy 1, 3 ± 0.1 div ± 2 mV ± 1.5% of offset setting for offsets ≥ 2 V 50 Ω: ± 4 divisions from center screen 1 mV to 100 mV; 2nd harmonic distortion of –30 dBc Dynamic range 7 1 MΩ: ± 4 divisions from center screen 101 mV to 5 V; 2nd harmonic distortion of –20 dBc Dual cursor: ± [(DC gain accuracy) + (resolution)] DC voltage measurement accuracy 2 Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)] 1. 2. 3. 4. 5. 6. 7. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration temperature. Input impedance is valid when V/div scaling is adjusted to show all waveform vertical values within the oscilloscope display. Vertical resolution = 0.4% of full scale(≤ 5 GSa/s) or 0.1% of full scale(10 GSa/s or 20 GSa/s). 50 Ω input: Full scale is defined as 8 vertical divisions. Magnification is used below 2 mV/div, full-scale is defined as 16 mV. The major scale settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V. Testing is at maximum sample rate. 1 MΩ input: Full scale is defined as 8 vertical divisions. Magnification is used below 2 mV/div, full-scale is defined as 16 mV. The major scale settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V. Testing is at maximum sample rate. Calculation based on Tr = 0.43/BW. Calculation based on Tr = 0.31/BW. 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported. For a 10:1 probe on the 1 MΩ input, vertical scaling is multiplied by 10. 33 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) RMS noise floor (Vrms ac) on 50 Ω inputs Vertical setting (Volts/div) 1 mV/div 2 mV/div 5 mV/div 10 mV/div 20 mV/div 50 mV/div 100 mV/div 200 mV/div 500 mV/div 1 V/div Vertical - digital channels Input channels Analog bandwidth Threshold selections User-defined threshold range Maximum input voltage Threshold accuracy Input dynamic range Minimum input voltage swing Input impedance Channel-to-channel skew Resolution S-054A 74 uV 74 uV 77 uV 87 uV 125 uV 372 uV 0.78 mV 1.6 mV 3.5 mV 5.1 mV S-104A 90 uV 90 uV 94 uV 110 uV 163 uV 456 uV 0.96 mV 2.0 mV 4.2 mV 6.8 mV S-204A 120 uV 120 uV 129 uV 163 uV 233 uV 610 uV 1.2 mV 2.6 mV 5.5 mV 9.2 mV S-254A 130 uV 130 uV 135 uV 172 uV 254 uV 650 uV 1.3 mV 2.8 mV 6 mV 10.1 mV S-404A 153 uV 153 uV 173 uV 220 uV 330 uV 768 uV 1.6 mV 3.4 mV 7.3 mV 12.5 mV 16 channels of timing 400 MHz User-defined, TTL, 5.0 V CMOS, 3.3 V CMOS, 2.5 V CMOS, ECL, PECL ± 8.00 V in 10 mV increments ± 40 V peak ± (100 mV + 3% of threshold setting) ± 10 V about threshold 500 mV peak-to-peak 100 kΩ ± 2% (~ 8 pF) at probe tip 500 ps (typical) 1 bit S-604A 195 uV 195 uV 205 uV 256 uV 446 uV 1.3 mV 2.3 mV 4.9 mV 10.0 mV 17.6 mV S-804A 260 uV 260 uV 320 uV 390 uV 620 uV 1.4 mV 3.1 mV 6.4 mV 13.3 mV 24.1 mV 34 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Horizontal Horizontal system: Oscilloscope channels Main timebase range Resolution Modes Reference position Horizontal position range Delayed sweep range Time scale accuracy 1, 8 Oscilloscope channel de-skew range Intrinsic jitter 6 (Sample clock jitter) Inter-channel intrinsic jitter 3 Inter-channel skew drift 3, 7 Jitter measurement floor 2 –– Time interval error –– Period jitter –– Cycle-cycle/N-cycle jitter Inter-channel jitter measurement floor 2, 3, 5 1. 2. 3. 4. 5. 6. 7. 8. 5 ps/div to 50 s/div 1 ps Main, Delayed, Roll ⦁ (200 ms/div to 200 s/div) Continuously adjustable across horizontal display range 0 to ± 500 sec 1 ps/div to current main time scale setting ± (12 ppb initial + 75 ppb/year aging) –1 ms to +1 ms Acquired time range or Internal reference delta-time interval < 1 us (100 ns/div) 100 fs rms 10 us (1 us/div) 123 fs rms 100 us (10 us/div) 138 fs rms 1 ms (100 us/div) 145 fs rms 10 ms ( 1 ms/div) 200 fs rms 100 fs rms < 500 fs rms External reference 100 fs rms 123 fs rms 138 fs rms 145 fs rms 145 fs rms 2 2 Noise Floor + ( Intrinsic Jitter ) Slew Rate 2 2 Noise Floor 2 + ( Intrinsic Jitter ) Slew Rate 2 2 Noise Floor 3 + ( Intrinsic Jitter ) Slew Rate 2 2 Time Interval Time Interval Inter channel Error Edge1 + Error Edge 2 + ( ) ( ) Intrinsic Jitter 2 Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration temperature. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically clipped. Slew rate of sine wave = (peak signal amplitude) ⦁ 2 ⦁ π ⦁ f, slew rate of fast step ~= (10 to 90% rise time). Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time Measurement Accuracy formula. Scope channels and signal interconnect de-skewed prior to measurement. External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for Time Interval Error formula and depends on delta-time between edges for all two-edge formulas. Skew between channels caused by ± 5 degrees C temperature change. Initial = immediately after factory or user calibration. 35 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Horizontal (Continued) Horizontal system: Oscilloscope channels (Continued) Delta time measurement accuracy 2, 3, 4, 5 –– Intra-channel –– No averaging Time Interval 2 ± 5 + Error (Edge1) –– 256 averages –– Inter-channel –– No averaging –– 256 averages 2. 3. 4. 5. 2 Time Interval Time Scale Delta Error Edge 2 + ( ) Accuracy Time 2 2 5 Time Interval Time Interval Time Scale Delta ± + + 16 Error (Edge1) Error (Edge 2) Accuracy Time 2 Time Interval 2 Time Interval 2 Inter channel 5 + + Error (Edge1) Error (Edge 2) Intrinsic Jitter ± Time Scale Delta Inter channel + + Accuracy Time Skew Drift 2 2 2 Time Interval Time Interval Inter channel 5 + + 16 Error (Edge1) Error (Edge 2) Intrinsic Jitter ± Time Scale Delta Inter channel + + Accuracy Time Skew Drift Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically clipped. Slew rate of sine wave = (peak signal amplitude) ⦁ 2 ⦁ π ⦁ f, slew rate of fast step ~= (10 to 90% rise time). Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time Measurement Accuracy formula. Scope channels and signal interconnect de-skewed prior to measurement. 36 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Acquisition and trigger Acquisition - scope channels Maximum real time sample rate Standard memory depth Memory options Sampling modes Filters Acquisition - digital channels Maximum real time sample rate Max memory depth per channel Minimum width glitch detect DSO/MSO models Trigger – scope channels Max trigger freq on 50 Ω path Sensitivity (edge trigger) 1 MΩ 50 Ω Trigger level range - any channel Sweep modes Display jitter 2, 3, 4 (Trigger jitter) Trigger hold off range Trigger actions Trigger coupling 1. 4 x 10 GSa/s or 2 x 20 GSa/s 50 Mpts x 4 channels, 100 Mpts x 2 channels Option 100: 100 Mpts x 4 channels, 200 Mpts x 2 channels Option 200: 200 Mpts x 4 channels, 400 Mpts x 2 channels Option 400 (single/run mode) Sample rate 2 channels 4 channels 20 GSa/s 800/400 Mpts Not available 10 GSa/s 400/200 Mpts 400/200 Mpts ≤ 5 GSa/s 536/268 Mpts 400/200 Mpts Real time Real time with peak detect High resolution (11 or 12 bit user selection) Equivalent time Segmented memory (minimum time between segments = 3.3 us) Memory depth Maximum number of segments Standard (50 Mpts/ch) 16,384 100 Mpts/ch 32,768 200 Mpts/ch 65,536 400 Mpts/ch 65,536 Roll (200 ms to 1 ks per division) Sin(x)/x interpolation 2 GSa/s 128/64 Mpts with 2 GSa/s, 64/32 Mpts with < 2 GSa/s (single/run mode) 2 ns S-054A S-104A S-204A S-254A S-404A S-604A S-804A Ch 1, 2, 3, 4, aux, and line Full bandwidth 3 GHz bandwidth 20 MHz 200 MHz 1 GHz 2.5 GHz > 2.5 GHz < 5 mV/div < 0.7 div < 1.4 div (up to 500 MHz) > 5 mV/div < 0.3 div < 0.5 div < 0.8 div (up to 500 MHz) < 5 mV/div < 0.15 div < 0.2 div < 0.3 div < 0.45 div < 1.6 div > 5 mV/div 0 div 0 div 0 div < 0.1 div < 0.6 div Ch 1, 2, 3, 4: 50 Ω: ± 4 divisions from center screen Ch 1, 2, 3, 4: 1 MΩ: ± 4 divisions from center screen Auxiliary: ± 5 V (50 Ω) (maximum input: 5 Vpp) Auto, triggered, single 520 fs rms 100 ns to 10 s Specify an action to occur (and the frequency of the action) when a trigger condition occurs Actions include: email on trigger and execute “multipurpose” user settings 50 Ω and 1 MΩ: DC, or AC: (10 Hz) low frequency reject (50 kHz high pass filter), high frequency reject (50 kHz low pass filter) Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration temperature. 2. Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to Time Interval Error value expressed in the formula above using the minimum Time Scale Accuracy value. 3. Value shown represents typical Display jitter for DSOS404A at 100 mV/div triggering on 500 mVpp 2 GHz sin wave signal. 4. Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped. 37 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Trigger Trigger: digital channels MSO models Threshold range (user defined) Threshold accuracy Trigger modes Edge (analog and digital) Edge transition (analog) Edge then edge (time) (analog and digital) Edge then edge (event) (analog and digital) Glitch (analog and digital) Pulse width (analog and digital) 1 GHz and 500 MHz model 2 GHz and 2.5 GHz model 4 GHz, 6 GHz, 8 GHz model Runt (analog) Timeout (analog and digital) Pattern/pulse range State (analog and digital) Setup/hold (analog) Window (analog) Protocol packets (hardware serial trigger) Zone-qualified ± 8.0 V in 10-mV increments ± (100 mV + 3% of threshold setting) Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on any channel Trigger on rising or falling edges that cross two voltage levels in > or < the amount of time specified. Edge transition setting from 250 ps The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling edge on any one selected input will generate the trigger The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling edges, another rising or falling edge on any one selected input will generate the trigger Triggers on glitches narrower than the other pulses in your waveform by specifying a width less than your narrowest pulse and a polarity. Glitch range settings equal pulse width settings Trigger on a pulse that is wider or narrower than specified. Pulse width range setting is 250 ps to 10 s for analog channels and 2 ns to 10 s for digital channels Minimum detectable pulse width 150 ps for analog channels 1 ns for digital channels Minimum detectable pulse width 100 ps for analog channels 1 ns for digital channels Minimum detectable pulse width 50 ps for analog channels 1 ns for digital channels Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Runt settings equal pulse width settings Trigger when a channel stays high, low, or unchanged for too long Timeout settings equal pulse width settings Triggers when a specified logical combination of the channels is entered, exited, present for a (analog and digital) Specified period of time or is within a specified time range or times out. Each channel can have a value of High (H), Low (L) or Don’t care (X) Pattern trigger clocked by the rising, falling or alternating between rising and falling edge of one channel. Triggers on setup, hold, or setup and hold violations in your circuit. Requires a clock and data signal on any two inputs (except aux or line) channels as trigger sources. Setup and/or hold time must then be specified. Trigger on entering, exiting, or inside specified voltage range Requires specified protocol option, I2C, SPI, CAN, LIN, RS-232/UART, SVID, USB, PCIe® Gen 1 Requires InfiniiScan software option. SW-based triggering across up to 8 user-drawn zones. For each zone, user specifies “must intersect” or “must not intersect.” Zones can be drawn on multiple channels and combined using Boolean expressions 38 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Measurements and math Measurements and math Math functions can operate on any combination of channels, memories, or other functions Math functions Up to 16 independent functions Gates Up to 16 (any function can be used as a gate) Waveform measurements Can be made on either main, zoom, or gated region with up to 20 simultaneous measurements Waveform memories Four for scope waveforms, one memory that includes all digital channels simultaneously Voltage (scope channels) Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, V overshoot, preshoot, V preshoot, upper, middle, lower, crossing point voltage , pulse top, pulse base, pulse amplitude Time (digital channels) Period, frequency, positive width, negative width, duty cycle, delta time Time (scope channels) Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt, channel-tochannel delta time, channel-to-channel phase, count pulses, burst width, burst period, burst interval, setup time, hold time Mixed (scope channels only) Area, slew rate Frequency domain FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude Level qualification Any channels that are not involved in a measurement can be used to level-qualify all timing measurements Eye-diagram measurements Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion Measurement modes Statistics Displays the mean, standard deviation, minimum, maximum range, and number of measurement values for the displayed automatic measurements Histograms Source Waveform or measurement Orientation Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined using waveform markers Measurements Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of most hits), X scale hits, and X offset hits Marker modes Manual markers, track waveform data, track measurements, and delta marker values can be displayed Waveform math Operators Absolute value, add, AM demodulation, average, gating, Butterworth 1, common mode, differentiate, divide, envelope, FFT magnitude, FFT phase, FIR 1, high pass filter, integrate, invert, LFE 1, low pass filter (4th-order Bessel Thompson filter), magnify, max, min, multiply, RT Eye 1, smoothing, SqrtSumOfSquare 1, square, square root, subtract, versus, chart (MSO models) Automatic measurements Measure menu access to all measurements, up to 20 measurements can be displayed simultaneously Multipurpose User-selectable for saving images when pressed or taking a series of measurements defined by the user, or other actions Drag-and-drop measurement Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed toolbar waveforms FFT (FFT viewer is standard) Frequency range DC to 10 GHz (at 20 GSa/s) or 5 GHz (at 10 GSa/s) Frequency resolution Resolution = sample rate/memory depth Window modes Hanning, flattop, rectangular, Blackman Harris, Hamming 1. Requires MATLAB software and license. 39 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Display, computer system, and IO ports Display Display XGA 15” capacitive touch screen Resolution Infiniium application runs with 1024 pixels horizontally x 768 pixels vertically Annotation Up to 100 bookmarks can be inserted into the waveform area. Each can float or be tied to a specific waveform Grids Up to 16 grids per waveform area Waveform windows Up to 8 Waveform styles Connected dots, dots, variable persistence, infinite persistence, color graded infinite persistence Computer system and peripherals, I/O ports Computer system and peripherals Operating system Windows 7 Embedded Standard CPU 3 GHz Intel i5 quad core PC system memory 8 GB RAM Drives ≥ 240 GB removable SSD (solid state drive) Peripherals Optical USB mouse and compact keyboard supplied. All Infiniium models support any Windows-compatible input device with a USB interface LXI compliance LXI class C IO Ports LAN RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled remote control, email on trigger, data/file transfers and network printing USB 7 total ports: –– Two USB 2.0 ports on the front –– Four USB ports on the side (two are USB 3.0 and two are USB 2.0) –– One USB 3.0 port on side supporting up to 200 MB/s data offload External display Drivers support up to two simultaneous displays DisplayPort and VGA video out Trigger out TTL levels into high impedance load Auxiliary output DC (± 2.4 V), square wave Time base reference output Amplitude into 50 Ω: 1.65 Vpp ± 50 mV sine wave (8.3 dBm ± 0.3 dB) regardless of whether it is derived from the internal or the external reference Frequency from internal reference: 10 MHz ± 100 ppb if it has been calibrated within the last year Time base external reference Frequency: 10 MHz ± 20 ppm input (impedance into 50 Ω) Amplitude: 356 mVpp (–5 dBm) minimum to 5 Vpp (+18 dBm) maximum File types Oscilloscope waveforms: Compressed *.wfm, *.bin, *.h5, and *.osc composite (setup and waveforms) Internal formats Larger formats *.csv, *.tsv, and*.txt Digital waveform Support in .osc or .h5 formats Images .bmp, .tiff, .gif, .png or .jpg 40 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Infiniium S-Series Performance Characteristics (Continued) Environmental and general Temperature Humidity Altitude Vibration Power Typical operator noise Weight Dimensions (with feet retracted) Safety Electromagnetic compatibility standards MTBF (mean time before failure) Operating 5 to 40°C Non-operating –40 to +65°C Operating up to 90% relative humidity (non-condensing) at +40 °C Non-operating up to 90% relative humidity (non-condensing) at +65 °C Operating up to 4,000 meters (12,000 feet) Non-operating up to 15,300 meters (50,000 feet) Operating random vibration 5 to 500 Hz, 10 minutes per axis, 0.3 g (rms) Non-operating random vibration 5 to 500 Hz, 10 minutes per axis, 2.41 g (rms); resonant search 5 to 500 Hz, swept sine, 1 octave/minute sweep rate, (0.75 g), 5 minute resonant dwell at 4 resonances per axis 100 to 120 V, ± 10% 50/60/400 Hz 100 to 240 V, ± 10% 50/60 Hz Max power dissipated: 380 W 35 dB at front of instrument Frame: 12 kg (26.4 lbs). Shipping: 20 kg (44.1 lbs) Height: 12.9 in (33 cm); width: 16.8 in (43 cm); depth: 9 in (23 cm) CAN/CSA22.2 No. 61010-1-12 UL Std. 61010-1 (3rd Edition) IEC 61326-1:2005/EN 61326-1:2006 CISPR 11/EN 55011 IEC 61000-4-2/EN 61000-4-2 IEC 61000-4-3/EN 61000-4-3 IEC 61000-4-4/EN 61000-4-4 110,000 hours (typical) Keysight Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications 41 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. The business that became Keysight was a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. The business that became Keysight was a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. 42 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Services www.keysight.com/find/service Our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. The result? We help you implement new technologies and engineer improved processes that lower costs. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. United Kingdom PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or service marks of PCI-SIG. (BP-09-23-16) MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any use of such marks by Keysight Technologies is under license. Other service marks and trade names are those of their respective owners. www.keysight.com/find/S-Series 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2014 - 2016 Published in USA, October 11, 2016 5991-3904EN www.keysight.com