MB1S-MB10S PRV : 100 - 1000 Volts Io : 0.8 Ampere Features • Glass passivated chip junctions. • High surge overload rating : 35A peak • Saves space on printed circuit boards. • High temperature soldering guaranteed: 260 °C/10 seconds. • RoHS compliant package Mechanical Characteristics • Case : Molded plastic • Epoxy : UL94V-O rate flame retardant • Terminals : Plated Lead solderable per MIL-STD-750,Method 2026 • Polarity : Polarity symbols marked on body • Mounting position : Any Graphic symbol • Weight : 0.22 gram Packing & Order Information 50/Tube ; 1,000/Box MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. 60 Hz, resistive or inductive load. Rating Symbol MB01S MB02S MB04S MB06S MB08S MB10S Unit Maximum recurrent peak reverse voltage VRRM 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 70 140 280 420 560 700 V VDC 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum Average Forward Output Rectified Current (See Fig.1) IF(AV) 0.5 (1) (on glass-epoxy P.C.B.) 0.8 (2) (on aliminum substrate) A Maximum Peak Forward Surge Current Single half sine wave Superimposed IFSM 35 A on rated load (JEDEC Method) Publication Order Number: [MB1S-MB10S] © Bruckewell Technology Corporation Rev. A -2014 MB1S-MB10S PRV : 100 - 1000 Volts Io : 0.8 Ampere Rating at 25 °C ambient temperature unless otherwise specified. 60 Hz, resistive or inductive load. Rating Symbol Current Squared Time at t < 8.3 ms. It 2 5.0 AS VF 1.0 V Maximum DC Reverse Current Ta = 25°C IR 5.0 μA at Rated DC Blocking Voltage Ta = 125°C IR(H) 100 μA (3) pF (1) °C/W MB01S MB02S MB04S Maximum Instantaneous Forward Voltage per element at IF = 0.4 A Typical Junction Capacitance per element Typical Thermal Resistance Junction and Storage Temperature Range MB06S MB08S MB10S 13 Cj RθJA 85 -55 to +150 TJ,TSTG Unit 2 °C Notes : (1) On glass epoxy P.C Board mounted on 0.5" x 0.5" (13mm x 13mm) Pads. (2) On aluminum substrate P.C.B. with an area 0.8" x 0.8" (20mm x 20mm) mounted on 0.5" x 0.5" (13mm x 13mm) Pads. (3) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC Publication Order Number: [MB1S-MB10S] © Bruckewell Technology Corporation Rev. A -2014 MB1S-MB10S PRV : 100 - 1000 Volts Io : 0.8 Ampere ■RATING AND CHARACTERISTIC CURVES ( MB1S - MB10S ) Figure 1. DERATING CURVE FOR OUTPUT RECTIFIED CURRENT Figure 2. MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER BRIDGE ELEMENT Figure 3. TYPICAL FORWARD CHARACTERISTICS Figure 4. TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT Publication Order Number: [MB1S-MB10S] © Bruckewell Technology Corporation Rev. A -2014 MB1S-MB10S PRV : 100 - 1000 Volts Io : 0.8 Ampere Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MB1S-MB10S] © Bruckewell Technology Corporation Rev. A -2014