7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 5 4 3 2 20 REVISION 2266418 -2 DESCRIPTION A 2266418 -5 FINE CRIMP HEIGHT ADJUST A A NON-CRIMP HEIGHT ADJUST 2266418 -7 A FINE CRIMP HEIGHT ADJUST A CRIMP TOOLING KIT CONVERT TO - PNEUMATIC SERVO LATCH PLATE FINE CRIMP HEIGHT ADJUST 2266418 -6 7- 2266418 -7 APPLICATOR STYLE CONVERSION CHART FEED TYPE 4 SERVO LATCH PLATE SMART APPLICATOR 4 SERVO LATCH PLATE 12 NONE - - PNEUMATIC FEED - - - WIRE INSUL - 2119951-1 2161326-1 - 2119950-1 - - - - - - - 1338685-1 - - - 8- 2266418 -5 8- 2266418 -4 - 5-18022-5 - - - - - 1901094-3 - - 2119641-1 - - - - - 2168400-6 - 2119799-1 - - - - (QUANTITY 2) - - - - - 2063440-1 - - - - - - - - - - TYPE 3.94 mm [.155] APPLICATOR INSTRUCTIONS 408-10389 - - - KOSTAL TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 5.00-5.60 mm [.197-.220 IN] C TERMINAL APPLICATION SPECIFICATION TE TERMINAL 1572233-1 1572233-2 1572233-3 WIRE SIZE 4.00mm2 n 00074173 - TERMINALS APPLIED C1__DWG_PN_1_1 22125499720 C1__DWG_PN_1_2 22140499720 C1__DWG_PN_1_3 - INSULATION DIAMETER RANGE - 13 3.40-3.70 mm [.134-.146 IN] - - - - - - - - C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 1572899-1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 1572899-2 1572899-3 1.95+/-0.05 [.077+/-.002] C1__DWG_PN_3_0 C1__DWG_PN_3_1 C1__DWG_PN_3_2 C1__DWG_PN_3_3 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 - 10 KOSTAL TERMINAL 22124499720 C1__DWG_PN_1_0 - KOSTAL CRIMP SPECIFICATION SLK 2.8 TERMINAL NAME: - 6 C1__DWG_PN_4_0 - C1__DWG_PN_4_1 10140499110 - C1__DWG_PN_4_2 10125499110 CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 - KOSTAL TERMINAL 10124499110 - C1__DWG_PN_4_3 13 - - 9 - 7.8 - W1__FA_SETTING_1 - B 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. - 6 - 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 - APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- - 2266418 -4 2266418 -5 2266418 -6 - 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 11 A 12 13 - 1 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37. GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 - 1 & 252. - 1 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 1 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON THE BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. WHEN ASSEMBLING A NON CRIMP HEIGHT ADJUST APPLICATOR (-6) USE SHIMS FROM ITEM 260 TO ACHIEVE A NOMINAL SHIM HEIGHT OF FEED MUST BE SET TO USE THE SLOT IN THE CARRIER STRIP. 1 1 1 - 1 1 - P LTR DESCRIPTION DATE DWN APVD RELEASED 02SEP2014 RK GB ECR-14-015266 15OCT2014 KH UG 1 1 1 - - DIMENSIONS: ATLANTIC VERSION mm & 4 of 4) MATERIAL - 1 -2 PART NO - - 1 REF - 1 - 1 1 1 1 - - - 1 - 1 2 - - 1 1 2 - 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 - - 1 - - 1 1 - - 1 1 - - - 1 1 - 2119957-2 1803078-3 8-21084-0 2119640-1 2079988-1 2119641-1 2119798-1 1-22279-3 2161314-1 2119082-4 2079764-1 2119083-1 7-18023-7 2168400-6 2063440-1 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 2119944-1 1-455888-9 2119956-1 2119791-9 2119740-1 2168078-1 2119793-1 992763-5 2079383-4 5-18022-5 1338685-1 2168400-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119656-9 2161311-1 1-2079383-5 2119645-1 2119957-1 2119644-2 2119085-1 2119092-1 1752356-9 2079383-5 2161328-1 1320908-7 2119959-2 455888-3 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 318707-1 1633136-1 2119757-8 238011-3 4-1803018-2 455888-8 2-1752057-0 - 2 1 1 REF REF REF - - - - - - - - - 1 1 - 1 REF REF - 1 - - 1 - REF REF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 - 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 - 1 1 1 1 - 1 1 1 1 - 2 1 1 1 4 2 1 1 1 4 2 1 1 - 4 2 1 - - 4 3 1 - - 1 3 1 - 2 1 - 1 1 2 - 3 1 - 2 1 1 1 - 2 1 1 1 1 - 1 1 1 1 1 -6 -5 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 1 - -77 -7 3.85 . 66 - F O 3.30 mm [.130] A A1 6 SIZE REVISIONS DIST PART NUMBERS REQUIRED - CRIMP 1 A - APPLICATOR DATA LOC SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER D 6 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - APPLICATOR SHIM PACK SPACER, PRECISION O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, STEPPED, ATLANTIC, SF, NON-ADJ CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM FEED FINGER ASSEMBLY,SF SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, BHSC, RoHS (M4 X 8) SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SHCS, LOW HEAD, RoHS, M4 X 12 SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, SF RAM, STEPPED, AMP STYLE, SIDE FEED SCR, BHSC, RoHS (M8 X 40) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION .130 DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE PREMIUM, STEPPED DWN 22JUL2014 CHK 22JUL2014 APVD 22JUL2014 Y.YIN G.BAILEY U.GUO NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119640-1 1 2079988_GATD 1 2119641-1 1 2119798-1 1 1-22279-3_SIMP 1 2161314 1 2119082-4 1 2079764 1 2119083 1 7-18023-7 2 2168400-6 1 2063440-1 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 2119944-1 1 1-455888-9 1 2119956-1 1 2119791-9 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 1 2079383-4 1 5-18022-5 1 1338685-1 4 2168400-1 2 1-2168083-0 1 5018030-1 1 811242-5 1 690753-2 1 18023-9 1 2119656-9 1 2161311 1 1-2079383-5 1 2119645 1 2119957-1 1 2119644-2 1 2119085 1 2119092-1 1 1752356-9 2 2079383-5 1 2161328 1 1320908-7 1 2119959-2 1 455888-3 1 1320928-6 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 318707-1 1 1633136-1 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-8 1 238011-3 1 4-1803018-2 1 455888-8 1 2-1752057-0 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 8-21084-0_GATD 260 259 252 250 249 248 247 246 245 244 243 242 241 240 238 213 198 172 166 164 163 137 136 135 133 117 82 71 70 67 66 63 62 60 59 56 54 53 52 51 50 49 46 44 41 40 39 38 37 35 34 33 32 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 1803078-3 DESCRIPTION PRODUCT SPEC - 1 2119957-2 Ocean Side Feed Applicator - DRAWING NO 2266418 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV A1 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 37 6 62 6 40 D 247 38 FEED TYPE 246 39 PNEUMATIC 250 2 44 7 252 245 35 244 7 249 63 53 A 260 166 259 6 82 1 13 4 C 3 52 TERMINAL SUPPORT LOCATION 1 4 28 5 41 135 198 11 A 66 2 67 164 213 33 A 24 13 117 REF REF 2 51 133 7.00 0.50 [ 0.276 0.019 ] 34 REF 1 70 SERVO LATCH PLATE B 2 8 137 SERVO FEEDER NOT INCLUDED 2 50 136 240 2 8 59 56 2 242 163 172 2 243 238 C D 19 10 30 B 20 21 9 29 1 ITEM 30 LOCATED AT REAR HOLES 12 241 CAM POSITION 13 30 REF 29 REF 1 11 11 30mm STROKE 20 46 32 34 54 8 1 60 54 10 1 248 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JUL2014 CHK 22JUL2014 APVD 22JUL2014 Y.YIN G.BAILEY U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266418 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV A1 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 5 4 3 2 20 SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER REVISION 2- 2266418 -2 DESCRIPTION A 2- 2266418 -5 FINE CRIMP HEIGHT ADJUST A 7- 2266418 -7 FINE CRIMP HEIGHT ADJUST A APPLICATOR STYLE CONVERSION CHART FEED TYPE FINE CRIMP HEIGHT ADJUST A 2- 2266418 -7 D 6 CRIMP TOOLING KIT CONVERT TO PNEUMATIC SERVO LATCH PLATE NONE - 4 CRIMP WIRE INSUL SIZE - - - - - 3.94 mm [.155] APPLICATOR INSTRUCTIONS 408-10389 SERVO LATCH PLATE 2119951-1 - 8- 2266418 -5 1901094-3 - SMART APPLICATOR 2161326-1 - 8- 2266418 -4 - - 2168400-6 (QUANTITY 2) - - - - - - - - - PNEUMATIC FEED 2119950-1 1338685-1 5-18022-5 2119641-2 2119799-1 2063440-1 - - - - - - - - - - - - - 6 KOSTAL CRIMP SPECIFICATION SLK 2.8 TERMINAL NAME: WIRE STRIP LENGTH 5.00-5.60 mm [.197-.220 IN] C TERMINAL APPLICATION SPECIFICATION 1572233-1 1572233-2 1572233-3 WIRE SIZE 4.00mm2 00074173 - TERMINALS APPLIED TE TERMINAL n 22124499720 22125499720 C1__DWG_PN_1_1 C1__DWG_PN_1_2 22140499720 C1__DWG_PN_1_3 - - - - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 1572899-1 1572899-2 1.95+/-0.05 [.077+/-.002] KOSTAL TERMINAL C1__DWG_PN_3_1 C1__DWG_PN_3_2 1572899-3 C1__DWG_PN_3_3 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 C1__DWG_PN_3_0 10124499110 10140499110 W1__DWG_CRIMP_HT_1 C1__DWG_PN_4_1 7.8 9 W1__FA_SETTING_1 6 - 12 - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. B 1 2 RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2266418 -4 2266418 -5 1 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 A 11 12 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 1 1 & 152. 1 MAGNET MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 1 1 1 1 1 1 1 1 1 1 1 - 1 - - - - 1 - 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 1 1 LTR DESCRIPTION DATE SEE SHEET 1 DWN APVD - - mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - SPACER, PRECISION FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) SHCS, LOW HEAD, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM, STEPPED, ASIAN STYLE, SIDE FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM FEED FINGER ASSEMBLY,SF SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 40) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION .130 DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE PREMIUM, STEPPED PART NO -77 -27 -25 -22 TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. FEED MUST BE SET TO USE THE SLOT IN THE CARRIER STRIP. 1 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 - 1 - 1 1 - - 1 1 1 - 2 1 1 - 1 2 1 - 1 - 2 - 3 - - - 1 3 - - 2 1 3 - 1 2 1 - 1 - 2 - 1 1 1 - 1 1 1 - - 1 1 - - REF 1 - - 1 - - 1 REF - - 1 - - - C1__DWG_PN_4_3 1 - - - 1 1 - - 1 1 1 - C1__DWG_PN_4_2 10125499110 CRIMP HEIGHT REFERENCE SETTING 12 C1__DWG_PN_4_0 - 1 1 - 4 - 1 - 1 4 - - 1 1 4 - 1 1 1 - 10 KOSTAL TERMINAL C1__DWG_PN_1_0 3.40-3.70 mm [.134-.146 IN] 1 - 1 - 1 1 - - INSULATION DIAMETER RANGE - 1 - 1 REF REF - - 2 1 REF - - - 1 - - 1 - - 1 1 - - - - - - 1 2 - - 1 1 - - 1 1 1 - TYPE 1 1 1 - 1 1 1 - 1 1 1 - 1 - 1 - 1 - - - KOSTAL TERMINAL P 1803078-3 2119782-1 2119640-1 2079988-1 1-22279-3 2119082-4 2079764-1 2119083-1 7-18023-7 2168400-6 2063440-1 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2168400-5 2119653-2 1-2119656-0 2161312-1 2119092-2 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 2119944-1 1-455888-9 2119956-1 2119791-9 2119740-1 2168078-1 2119793-1 992763-5 5-18022-5 1338685-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 1-2079383-5 2119645-1 2119957-1 2119644-2 1752356-9 2079383-5 2161328-1 1320908-7 2119959-2 455888-3 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 318707-1 1633136-1 2119757-8 238011-3 4-1803018-2 455888-8 2-1752057-0 1 1 - - - 1 1 - - - 1 - TERMINAL DATA: 66 - - F O 3.30 mm [.130] A PART NUMBERS REQUIRED - APPLICATOR DATA REVISIONS DIST - - - LOC 1 DWN 22JUL2014 CHK 22JUL2014 APVD 22JUL2014 Y.YIN G.BAILEY U.GUO NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2079988_GATD 1 1-22279-3_SIMP 1 2119082-4 1 2079764 1 2119083 1 7-18023-7 2 2168400-6 1 2063440-1 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 8-21084-1_GATD 1 2119641-2 1 2119798-2 1 2079383-8 4 2168400-5 1 2119653-2 1 1-2119656-0 1 2161312 1 2119092-2 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 2119944-1 1 1-455888-9 1 2119956-1 1 2119791-9 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 1 5-18022-5 1 1338685-1 2 1-2168083-0 1 5018030-1 1 811242-5 1 690753-2 2 18023-9 1 1-2079383-5 1 2119645 1 2119957-1 1 2119644-2 1 1752356-9 2 2079383-5 1 2161328 1 1320908-7 1 2119959-2 1 455888-3 1 1320928-6 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 318707-1 1 1633136-1 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-8 1 238011-3 1 4-1803018-2 1 455888-8 1 2-1752057-0 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119640-1 259 251 250 249 246 244 243 242 241 240 238 213 198 172 166 164 163 152 151 145 144 143 142 141 140 139 137 136 135 133 117 82 71 70 67 66 63 62 59 56 53 52 51 50 49 41 40 39 38 34 33 32 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119782 DESCRIPTION PRODUCT SPEC - 1 1803078-3 Ocean Side Feed Applicator - DRAWING NO 2266418 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A1 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - 251 6 62 40 145 38 D 246 39 152 7 FEED TYPE 140 D 2 2 244 7 139 243 PNEUMATIC 250 53 2 249 A 166 8 242 63 238 2 6 50 7.0 # 0.5 [0.276 # 0.019] REF 8 163 34 59 259 136 82 137 C 56 1 1 52 172 12 REF TERMINAL SUPPORT LOCATION 2 C 70 51 3 1 SERVO LATCH PLATE 4 28 5 41 240 133 4 135 198 A 164 66 SERVO FEEDER NOT INCLUDED 2 11 67 33 30 213 A 24 B 2 19 20 10 12 117 REF B 9 21 1 12 29 241 13 1 ITEM 30 LOCATED AT REAR HOLES 11 30 CAM POSITION REF REF 29 30mm STROKE 151 141 32 34 143 8 1 144 143 10 1 20 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 AIR FEED PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JUL2014 CHK 22JUL2014 APVD 22JUL2014 Y.YIN G.BAILEY U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266418 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A1