SAW Components SAW Rx 2in1 filter WCDMA Diversity Band 2 / Band 1 Series/type: Ordering code: B9912 B39212B9912P810 Date: Version: October 01, 2013 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Application ■ Low-loss 2in1 RF filter for mobile telephone WCD- Features 1 0.175 Package size 1.5 Max. Package height 0.45mm RoHS compatible Approx. weight 0.003g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level 3 0.18 0.39 2 3 4 10 0.075 ■ ■ ■ ■ ■ ■ ■ ■ 0.49 x1.1mm2 5 9 8 7 1.5 8 7 6 5 2 side view 0.075 10 1 bottom view 6 0.21 9 0.18 ■ 0.45 max. ■ ■ 3 1.1 ■ MA Band 2 and Band 1 systems (diversity) receive path (Rx). Usable passband: Band 2: 60 MHz Band 1: 60 MHz Unbalanced to balanced operation for both filters Impedance transformation from 50 Ω to 100 Ω for both filters Low amplitude ripple. top view 4 Pin configuration ■ ■ ■ ■ ■ 1 4 8,9 6,7 2,3,5,10 9 1 Input [Band 2] Input [Band 1] Output balanced [Band 2] Output balanced [Band 1] Case-ground t.b.d. 6 4 2,3,5,10 Please read cautions and warnings and important notes at the end of this document. 2 October 01, 2013 8 7 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Characteristics of Band 2 T = ZS = ZL = Temperature range for specification: Terminating source impedance: Terminating load impedance: -20 ˚C to +85 ˚C 50 Ω 100 Ω || 33nH min. typ. @ 25˚C max. — 1960.0 — MHz — 2.7 2.4 3.7 3.6 dB ∆α Amplitude ripple (p-p) 1930.0 ... 1990.0 MHz — 1.3 2.3 dB Error Vector Magnitude EVM2) @fcarrier 1932.4 ... 1987.6 MHz — 2.4 5.5 % 1930.0 ... 1990.0 MHz — 1.8 2.2 1930.0 ... 1990.0 MHz — 1.9 2.3 193) 22 — dB 50 60 60 60 40 30 40 45 33 67 67 67 65 48 46 44 52 42 — — — — — — — — — dB dB dB dB dB dB dB dB dB fC Center frequency αmax Maximum insertion attenuation 1930.0 ... 1990.0 MHz @fcarrier 1932.4 ... 1987.6 MHz αWCDMA1) Input VSWR Output VSWR Common mode rejection ratio 1930.0 ... 1990.0 MHz α Attenuation @fcarrier 1) 2) 3) 100.0 810.0 849.0 898.0 925.0 1850.0 1852.4 2400.0 2484.0 ... ... ... ... ... ... ... ... ... 810.0 849.0 898.0 925.0 1850.0 1910.0 1907.6 2484.0 6000.0 MHz MHz MHz MHz MHz MHz MHz αWCDMA1) MHz MHz Attenuation of WCDMA signal (“Powertransferfunction“).Please refer to annotation on following page. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. A CMRR of 19.6dB corresponds to a phase balance of 10˚ together with an amplitude balance of 1.0dB Please read cautions and warnings and important notes at the end of this document. 3 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for Passband, fCarrier ranges from 1932.4 MHz (lowest Rx channel) to 1987.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2 df = 1 Maximum ratings of Band 2 –40/+851) ˚C Storage temperature range Tstg DC voltage VDC 52) V VESD 503) V ESD voltage Input Power at 1850.0 ... 1910.0MHz 1) PIN 12 dBm Machine Model CW signal for 2000h at T = 55 ˚C 2) Extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy 3) acc. to JESD22-A115B (MM-Machine Model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Transfer function of Band 2 - narrowband Transfer function of Band 2 - wideband Please read cautions and warnings and important notes at the end of this document. 5 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Smith Charts Band 2 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Characteristics of Band 1 T = ZS = ZL = Temperature range for specification: Terminating source impedance: Terminating load impedance: fC Center frequency -20 ˚C to +85 ˚C 50 Ω 100 Ω || 15nH min. typ. @ 25˚C max. — 2140.0 — MHz — 1.6 2.1 dB dB αmax Maximum insertion attenuation 2110.0 ... 2170.0 MHz Amplitude ripple (p-p) 2110.0 ... 2170.0 MHz — 0.5 1.0 2110.0 ... 2170.0 MHz — 1.8 2.1 2110.0 ... 2170.0 MHz — 1.7 2.1 Common mode rejection ratio 2110.0 ... 2170.0 MHz 201) 23 — dB 40 50 40 50 40 32 45 40 46 25 30 32 34 28 60 58 59 56 52 51 53 47 52 37 40 40 41 42 — — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB dB ∆α Input VSWR Output VSWR α Attenuation 100.0 810.0 849.0 898.0 925.0 1620.0 1710.0 1755.0 1920.0 1980.0 2400.0 2430.0 2900.0 4600.0 1) ... ... ... ... ... ... ... ... ... ... ... ... ... ... 810.0 849.0 898.0 925.0 1620.0 1710.0 1755.0 1920.0 1980.0 2050.0 2430.0 2900.0 4600.0 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz A CMRR of 19.6dB corresponds to a phase balance of 10˚ together with an amplitude balance of 1.0dB Please read cautions and warnings and important notes at the end of this document. 7 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Maximum ratings of Band 1 Tstg –40/+851) ˚C DC voltage VDC 52) V ESD voltage VESD 503) V 15 dBm Storage temperature range Machine Model Input power at 1920.0 .. .1980.0MHz 1) PIN CW signal for 2000h at T = 55 ˚C 2) Extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy 3) acc. to JESD22-A115B (Machine Model-Machine Model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Transfer function of Band 1 - narrowband Transfer function of Band 1 - wideband Please read cautions and warnings and important notes at the end of this document. 9 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet Smith Charts Band 1 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 10 October 01, 2013 SAW Components B9912 SAW Rx 2in1 filter 1960.0 / 2140.0 MHz Data Sheet References Type B9912 Ordering code B39212B9912P810 Marking and package C61157-A8-A71 Packaging F61074-V8227-Z000 Date codes L_1126 B9912_LB_NB.s3p, B9912_LB_WB.s3p S-parameters B9912_UB_NB.s3p, B9912_UB_WB.s3p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See http://www.tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 October 01, 2013 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 October 01, 2013