Diodes AP2161 1a single channel current-limited power Datasheet

AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Description
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Single USB port power switches
Over-current and thermal protection
1.5A accurate current limiting
Reverse Current Blocking
95mΩ on-resistance
Input voltage range: 2.7V – 5.5V
0.6ms typical rise time
Very low shutdown current: 1uA (max)
Fault report (FLG) with blanking time (7ms typ)
ESD protection: 4KV HBM, 400V MM
Active low (AP2161) or active high (AP2171) enable
Ambient temperature range -40ºC to 85°C
SOT25, SOP-8L, MSOP-8L-EP (Exposed Pad), and
DFN2018-6: Available in “Green” Molding Compound
(No Br, Sb)
Lead Free Finish / RoHS Compliant (Note 1)
UL Recognized, File Number E322375
IEC60950-1 CB Scheme Certified
The AP2161 and AP2171 are integrated high-side power switches
optimized for Universal Serial Bus (USB) and other hot-swap
applications. The family of devices complies with USB 2.0 and
available with both polarities of Enable input. They offer current
and thermal limiting and short circuit protection as well as
controlled rise time and under-voltage lockout functionality.
A 7ms deglitch capability on the open-drain Flag output prevents
false over-current reporting and does not require any external
components.
All devices are available in SOP-8L, MSOP-8L-EP, SOT25, and
DFN2018-6 packages.
Applications
•
•
•
Consumer electronics – LCD TV & Monitor, Game Machines
Communications – Set-Top-Box, GPS, Smartphone
Computing – Laptop, Desktop, Servers, Printers, Docking Station, HUB
Typical Application Circuit
AP2171 Enable Active High
IN
Power Supply
2.7V to 5.5V
10k
10uF
Load
OUT
0.1uF
0.1uF
120uF
FLG
EN
ON
GND
OFF
Available Options
Part Number
Channel
Enable pin (EN)
AP2161
AP2171
1
1
Active Low
Active High
AP2161/AP2171 Rev. 6
DS31564
Current limit
(typical)
1.5A
1.5A
1 of 19
www.diodes.com
Recommended maximum
continuous load current
1.0A
1.0A
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Ordering Information
AP 21 X 1 XX G - X
Enable
Channel
Package
Green
Packing
6 : Active Low
7 : Active High
1 : 1 Channel
W : SOT25
S : SOP-8L
MP : MSOP-8L-EP
FM : DFN2018-6
G : Green
7/13 : Tape & Reel
Package
Code
W
S
MP
FM
Device
AP21X1WG-7
AP21X1SG-13
AP21X1MPG-13
AP21X1FMG-7
Notes:
7”/13” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
2500/Tape & Reel
-13
2500/Tape & Reel
-13
3000/Tape & Reel
-7
Packaging
(Note 2)
SOT25
SOP-8L
MSOP-8L-EP
DFN2018-6
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Pin Assignment
( Top View )
( Top View )
GND 1
8 NC
GND
1
8
NC
OUT
IN
2
7
OUT
6
OUT
IN
3
6
OUT
EN
4
5
FLG
5
FLG
IN 2
7
IN 3
EN 4
MSOP-8L-EP
SOP-8L
( Top View )
OUT
1
GND
2
FLG
3
( Top View )
5
4
IN
EN
1
6
OUT
IN
2
5
OUT
EN
3
4
FLG
DFN2018-6
SOT25
AP2161/AP2171 Rev. 6
DS31564
GND
2 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Pin Descriptions
Pin
Name
Pin Number
SOP-8L
MSOP-8L-EP
SOT25
DFN2018-6
Descriptions
GND
1
2
1
Ground
IN
2, 3
5
2
Voltage input pin (all IN pins must be tied together
externally)
EN
4
4
3
Enable input, active low (AP2161) or active high
(AP2171)
FLG
5
3
4
Over-current and over-temperature fault report;
open-drain flag is active low when triggered
OUT
6, 7
1
5, 6
Voltage output pin (all OUT pins must be tied together
externally)
NC
8
N/A
N/A
No internal connection; recommend tie to OUT pins
Functional Block Diagram
AP2161, AP2171
IN
Current
Sense
OUT
Current
Limit
FLG
UVLO
EN
Driver
Thermal
Sense
Deglitch
GND
AP2161/AP2171 Rev. 6
DS31564
3 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Absolute Maximum Ratings
Symbol
ESD HBM
Parameter
Human Body Model ESD Protection
ESD MM
Machine Model ESD Protection
for MSOP-8L-EP, SOT25 packages
Machine Model ESD Protection
for DFN2018-6, SOP-8L packages
VIN
VOUT
VEN , VFLG
Iload
TJmax
TST
Notes:
Input Voltage
Output Voltage
Enable Voltage
Maximum Continuous Load Current
Maximum Junction Temperature
Storage Temperature Range (Note 3)
Ratings
4
Units
KV
400
V
300
V
6.5
VIN + 0.3
6.5
Internal Limited
150
-65 to 150
V
V
V
A
°C
°C
3. UL Recognized Rating from -30°C to 70°C (Diodes qualified TST from -65°C to 150°C)
Recommended Operating Conditions
Symbol
VIN
IOUT
TA
Parameter
Input voltage
Output Current
Operating Ambient Temperature
AP2161/AP2171 Rev. 6
DS31564
4 of 19
www.diodes.com
Min
2.7
0
-40
Max
5.5
1.0
85
Units
V
A
°C
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Electrical Characteristics
(TA = 25°C, VIN = +5.0V, unless otherwise stated)
Symbol
Parameter
Test Conditions
VUVLO Input UVLO
Rload=1kΩ
ISHDN Input Shutdown Current
Disabled, IOUT= 0
IQ
Input Quiescent Current
Enabled, IOUT= 0
ILEAK
Input Leakage Current
Disabled, OUT grounded
IREV
Reverse Leakage Current
Disabled, VIN= 0V, VOUT= 5V, IREV at VIN
SOT25, MSOP-8L-EP,
TA = 25°C SOP-8L
VIN = 5V,
DFN2018-6
I = 1A
RDS(ON)
Switch on-resistance
OUT
VIN = 3.3V,
IOUT= 1A
ISHORT
ILIMIT
ITrig
VIL
VIH
ISINK
TD(ON)
TR
TD(OFF)
TF
RFLG
TBlank
TSHDN
THYS
θJA
Short-Circuit Current Limit
Over-Load Current Limit
Current limiting trigger
threshold
EN Input Logic Low Voltage
EN Input Logic High Voltage
EN Input leakage
Output turn-on delay time
CL=1μF, Rload=10Ω
CL=1μF, Rload=10Ω
CL=1μF, Rload=10Ω
Output turn-off delay time
Output turn-off fall time
CL=1μF, Rload=10Ω
FLG output FET on-resistance IFLG =10mA
FLG blanking time
CIN=10uF, CL=68μF
Thermal Shutdown Threshold Enabled, Rload=1kΩ
Thermal Shutdown Hysteresis
45
70
μA
1
μA
μA
μA
95
115
90
110
140
mΩ
140
170
1.1
1.5
A
1.9
A
2.0
A
0.8
V
V
μA
ms
2
1
0.05
4
0.6
1.5
ms
0.01
0.05
20
7
0.1
40
15
ms
ms
Ω
ms
°C
140
25
°C
SOP-8L (Note 4)
110
o
MSOP-8L-EP (Note 5)
60
o
157
o
70
o
SOT25 (Note 6)
DFN2018-6 (Note 7)
Notes:
Unit
V
1.2
Output Current Slew rate (<100A/s) , CL=68μF
VIN = 2.7V to 5.5V
VIN = 2.7V to 5.5V
VEN = 5V
Max
2.5
1
120
-40°C ≤ TA ≤ 85°C
Enabled into short circuit, CL=68μF
VIN= 5V, VOUT= 4.6V, CL=68μF, -40°C≤ TA ≤85°C
Typ.
1.9
0.5
1
-40°C ≤ TA ≤ 85°C
TA = 25°C
Output turn-on rise time
Thermal Resistance
Junction-to-Ambient
Min
1.6
C/W
C/W
C/W
C/W
4. Test condition for SOP-8L: Device mounted on FR-4, 2oz copper, with minimum recommended pad layout.
5. Test condition for MSOP-8L-EP: Device mounted on 2” x 2” FR-4 substrate PC board, 2oz copper, with minimum recommended pad on top
layer and thermal vias to bottom layer ground plane.
6. Test condition for SOT25: Device mounted on FR-4, 2oz copper, with minimum recommended pad layout.
7. Test condition for DFN2018-6: Device mounted on FR-4 2-layer board, 2oz copper, with minimum recommended pad on top layer and 3 vias
to bottom layer 1.0”x1.4” ground plane.
AP2161/AP2171 Rev. 6
DS31564
5 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Typical Performance Characteristics
VEN
50%
TD(ON)
10%
TD(OFF)
TR
TF
90%
50%
50%
TD(OFF)
TR
VOUT
VEN
50%
TD(ON)
90%
VOUT
10%
TF
90%
10%
90%
10%
Figure 1. Voltage Waveforms: AP2161 (left), AP2171 (right)
All Enable Plots are for AP2171 Active High
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
Ven
5V/div
Ven
5V/div
CL=1uF
Vout
2V/div
TA=25°C
Vout
2V/div
RL=10Ω
CL=1uF
TA=25°C
RL=10Ω
500us/div
500us/div
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
Ven
5V/div
Ven
5V/div
Vout
2V/div
Vout
2V/div
CL=100uF
TA=25°C
RL=10Ω
CL=100uF
TA=25°C
RL=10Ω
500us/div
500us/div
AP2161/AP2171 Rev. 6
DS31564
6 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Typical Performance Characteristics
(Continued)
Short Circuit Current,
Device Enabled Into Short
Inrush Current
Ven
5V/div
Ven
5V/div
CL=100uF
VIN=5V
TA=25°C
RL=5Ω
VIN=5V
Iout
200mA/div
CL=470uF
TA=25°C
Iout
500mA/div
CL=68uF
CL=220uF
500us/div
1ms/div
1 Ω Load Connected to Enabled Device
2Ω Load Connected to Enabled Device
VIN=5V
TA=25°C
Vflag
2V/div
CL=68uF
Iout
1A/div
VIN=5V
TA=25°C
Vflag
2V/div
CL=68uF
Iout
1A/div
2ms/div
2ms/div
Power On
Short Circuit with Blanking Time and Recovery
VIN=5V
TA=25°C
Vout
5V/div
CL=68uF
Vflag
5V/div
Iout
500mA/di
v
Vflag
5V/div
TA=25°C
CL=68uF
RL=5Ω
Ven
5V/div
Iout
1A/div
Vin
5V/div
20ms/div
AP2161/AP2171 Rev. 6
DS31564
1ms/div
7 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Typical Performance Characteristics
(Continued)
UVLO Decreasing
UVLO Increasing
TA=25°C
Vin
2V/div
CL=68uF
Vin
2V/div
RL=5Ω
TA=25°C
CL=68uF
RL=5Ω
Iout
500mA/div
1ms/div
10ms/div
Turn-On Time vs Input Voltage
Turn-Off Time vs Input Voltage
750
30
700
29
650
29
Turn-Off Time (us)
Turn-On Time (us)
Iout
500mA/div
600
550
500
450
400
CL=1uF
350
CL=1uF
RL=10Ω
28
TA=25°C
28
27
27
26
RL=10Ω
300
26
TA=25°C
25
250
1.5
2
2.5
3
3.5
4
4.5
5
5.5
1.5
6
2
2.5
3
3.5
4
4.5
5
5.5
6
Input Voltage (V)
Input Voltage (V)
Fall Time vs Input Voltage
Rise Time vs Input Voltage
22
650
600
22
Fall Time (us)
Rise Time (us)
550
500
450
400
CL=1uF
350
RL=10Ω
300
TA=25°C
21
21
CL=1uF
20
RL=10Ω
20
TA=25°C
19
250
2
2.5
3
3.5
4
4.5
5
5.5
6
AP2161/AP2171 Rev. 6
DS31564
2
2.5
3
3.5
4
4.5
5
5.5
6
Input Voltage (V)
Input Voltage (V)
8 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Typical Performance Characteristics
(Continued)
Supply Current, Output Disabled vs Ambient Temperature
Supply Current, Output Enabled vs Ambient Temperature
Supply Current, Output Disabled (uA)
Supply Current, Output Enabled (uA)
68
63
Vin=5.0V
58
Vin=5.5V
53
48
43
38
Vin=3.3V
33
Vin=2.7V
Vin=5.5V
0.8
Vin=5.0V
Vin=3.3V
0.7
0.6
0.5
0.4
0.3
0.2
0.1
Vin=2.7V
0.0
28
-60
-40
-20
0
20
40
60
80
-60
100
-40
-20
0
20
40
60
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
Static Drain-Source On-State Resistance vs Ambient
Temperature
Short-Circuit Output Current vs Ambient Temperature
1.56
Short-Circuit Output Current (A)
Static Drain-Source On-State
Resistance (mΩ)
170
Vin=2.7V
160
150
140
130
Vin=3.3V
120
110
100
Vin=5V
90
1.55
CL=100uF
1.54
Vin=3.3V
Vin=2.7V
Vin=5.0V
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
Vin=5.5V
1.45
80
-60
-40
-20
0
20
40
60
80
-60
100
-40
-20
0
20
40
60
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
Threshold Trip Current vs Input Voltage
Undervoltage Lockout vs Ambient Temperature
1.99
2.20
Threshold Trip Current (A)
Undervoltage Lockout (V)
1.98
2.10
2.00
UVLO Rising
1.90
1.80
UVLO Falling
1.70
1.97
1.96
1.95
1.94
1.93
1.92
TA=25°C
1.91
CL=68uF
1.90
1.89
1.88
1.60
-60
-40
-20
0
20
40
60
80
100
AP2161/AP2171 Rev. 6
DS31564
2.8
3.3
3.8
4.3
4.8
5.3
Input Voltage (V)
Ambient Temperature (°C)
9 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Typical Performance Characteristics
(Continued)
Current Limit Response vs Peak Current
Current Limit Response (us)
120
100
80
VIN=5V
60
TA=25°C
40
20
0
0
2
4
6
8
10
12
Peak Current (A)
AP2161/AP2171 Rev. 6
DS31564
10 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Application Note
Power Supply Considerations
A 0.01-μF to 0.1-μF X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is
recommended. Placing a high-value electrolytic capacitor on the input (10-μF minimum) and output pin(s) is
recommended when the output load is heavy. This precaution reduces power-supply transients that may
cause ringing on the input. Additionally, bypassing the output with a 0.01-μF to 0.1-μF ceramic capacitor
improves the immunity of the device to short-circuit transients.
Over-current and Short Circuit Protection
An internal sensing FET is employed to check for over-current conditions. Unlike current-sense resistors,
sense FETs do not increase the series resistance of the current path. When an over-current condition is
detected, the device maintains a constant output current and reduces the output voltage accordingly.
Complete shutdown occurs only if the fault stays long enough to activate thermal limiting.
Three possible overload conditions can occur. In the first condition, the output has been shorted to
GND before the device is enabled or before VIN has been applied. The AP2161/AP2171 senses the short
circuit and immediately clamps output current to a certain safe level namely ILIMIT.
In the second condition, an output short or an overload occurs while the device is enabled. At the instance
the overload occurs, higher current may flow for a very short period of time before the current limit function
can react. After the current limit function has tripped (reached the over-current trip threshold), the device
switches into current limiting mode and the current is clamped at ILIMIT.
In the third condition, the load has been gradually increased beyond the recommended operating current.
The current is permitted to rise until the current-limit threshold (ITRIG) is reached or until the thermal limit of
the device is exceeded. The AP2161/AP2171 is capable of delivering current up to the current-limit threshold
without damaging the device. Once the threshold has been reached, the device switches into its current
limiting mode and is set at ILIMIT.
Note that when the output has been shorted to GND at extremely low temperature (< -30oC), a minimum
120-μF electrolytic capacitor on the output pin is recommended. A correct capacitor type with capacitor
voltage rating and temperature characteristics must be properly chosen so that capacitance value does not
drop too low at the extremely low temperature operation. A recommended capacitor should have
temperature characteristics of less than 10% variation of capacitance change when operated at extremely
low temp. Our recommended aluminum electrolytic capacitor type is Panasonic FC series.
FLG Response
When an over-current or over-temperature shutdown condition is encountered, the FLG open-drain output
goes active low after a nominal 7-ms deglitch timeout. The FLG output remains low until both over-current
and over-temperature conditions are removed. Connecting a heavy capacitive load to the output of the
device can cause a momentary over-current condition, which does not trigger the FLG due to the 7-ms
deglitch timeout. The AP2161/AP2171 is designed to eliminate false over-current reporting without the need
of external components to remove unwanted pulses.
AP2161/AP2171 Rev. 6
DS31564
11 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Application Note
(Continued)
Power Dissipation and Junction Temperature
The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large
current. Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be
calculated by:
PD = RDS(ON)× I2
Finally, calculate the junction temperature:
TJ = PD x RθJA + TA
Where:
TA= Ambient temperature °C
RθJA = Thermal resistance
PD = Total power dissipation
Thermal Protection
Thermal protection prevents the IC from damage when heavy-overload or short-circuit faults are present for
extended periods of time. The AP2161/AP2171 implements a thermal sensing to monitor the operating
junction temperature of the power distribution switch. Once the die temperature rises to approximately 145°C
due to excessive power dissipation in an over-current or short-circuit condition, the internal thermal sense
circuitry turns the power switch off, thus preventing the power switch from damage. Hysteresis is built into
the thermal sense circuit allowing the device to cool down approximately 25°C before the switch turns back
on. The switch continues to cycle in this manner until the load fault or input power is removed. The
FLG open-drain output is asserted when an over-temperature shutdown or over-current occurs with
7-ms deglitch.
Under-voltage Lockout (UVLO)
Under-voltage lockout function (UVLO) keeps the internal power switch from being turned on until the power
supply has reached at least 1.9V, even if the switch is enabled. Whenever the input voltage falls below
approximately 1.9V, the power switch is quickly turned off. This facilitates the design of hot-insertion systems
where it is not possible to turn off the power switch before input power is removed.
Host/Self-Powered And Bus-Powered HUBs
Hosts and self-powered hubs have a local power supply that powers the embedded functions and the
downstream ports (see Figure 2). This power supply must provide from 5.25V to 4.75V to the board side of
the downstream connection under full-load and no-load conditions. Hosts and SPHs are required to have
current-limit protection and must report over-current conditions to the USB controller. Typical SPHs are
desktop PCs, monitors, printers, and stand-alone hubs.
Figure 2. Typical One-Port USB Host / Self-Powered Hub
AP2161/AP2171 Rev. 6
DS31564
12 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Application Note
(Continued)
Generic Hot-Plug Applications
In many applications it may be necessary to remove modules or pc boards while the main unit is still
operating. These are considered hot-plug applications. Such implementations require the control of current
surges seen by the main power supply and the card being inserted. The most effective way to control these
surges is to limit and slowly ramp the current and voltage being applied to the card, similar to the way in
which a power supply normally turns on. Due to the controlled rise times and fall times of the
AP2161/AP2171, these devices can be used to provide a softer start-up to devices being hot-plugged into a
powered system. The UVLO feature of the AP2161/AP2171 also ensures that the switch is off after the card
has been removed, and that the switch is off during the next insertion.
By placing the AP2161/AP2171 between the VCC input and the rest of the circuitry, the input power reaches
these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow
voltage ramp at the output of the device. This implementation controls system surge current and provides a
hot-plugging mechanism for any device.
AP2161/AP2171 Rev. 6
DS31564
13 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Marking Information
(1) SOP-8L
( Top view )
8
7
6
5
Logo
Part Number
6 : Active Low
7 : Active High
1 : 1 Channel
G : Green
YY : Year : 08, 09,10~
WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
AP21X X
YY WW X X
2
1
3
4
(2) MSOP-8L-EP
( Top view )
8
7
6
Logo
5
YWXE
Part Number
6 : Active Low
7 : Active High
AP21X X
2
1
3
A~Z : Green
MSOP-8L-EP
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
1 : 1 Channel
4
(3) SOT25
( Top View )
4
7
5
XX Y W X
1
AP2161/AP2171 Rev. 6
DS31564
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
Device
Package type
Identification Code
AP2161W
AP2171W
SOT25
SOT25
HT
HU
14 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Marking Information
(Continued)
(4) DFN2018-6
(Top View)
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
XX
YWX
Device
Package type
Identification Code
AP2161FM
AP2171FM
DFN2018-6
DFN2018-6
HT
HU
Package Information
(All Dimensions in mm)
0.254
0.10/0.20
3.85/3.95
5.90/6.10
(1) Package Type: SOP-8L
Gauge Plane
Seating Plane
0.62/0.82
Detail "A"
7°~9°
0.15/0.25
1.30/1.50
1.75max.
0.35max. 45°
7°~9°
Detail "A"
0°/8°
0.3/0.5
1.27typ
4.85/4.95
5.4
8x-0.60
8x-1.55
6x-1.27
Land Pattern Recommendation
(Unit: mm)
AP2161/AP2171 Rev. 6
DS31564
15 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Package Information
(Continued)
(2) Package Type: MSOP-8L-EP
EXPOSED PAD
(BOTTOM)
4.4
4.7/5.1
2.9/3.1
8x-0.45
8x-1.4
6x-0.65
1
Land Pattern Recommendation
(Unit:mm)
"A"
1
0.25
0.05
2.9/3.1
0.05/0.15
1.35/1.65
EXPOSED PAD
(BOTTOM)
Gauge plane
0.4/0.8
0.95Ref.
0°/8
°
0.75/0.95
0.22/0.38
1.10Max.
0.15Typ.
1
0.65Bsc.
DETAIL "A"
1.65/1.95
(3) Package Type: SOT25
AP2161/AP2171 Rev. 6
DS31564
16 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Package Information
(Continued)
0.08 C
0.13Typ
Seating P lane
2X0.25 A
6X -
0/0.05
0.10 C
0.545/0.605
(4) Package Type: DFN2018-6
S id e V ie w
C
1.75 /1.875
B
A
Pin #1 ID
1.3/1.5
CL
0.9/1.1
1.95/2.075
0.2/0.3
CL
0.30T yp
2X -
0.25 B
0.50 T yp
0.15/0.25
0.10
C A B
B o tto m V ie w
AP2161/AP2171 Rev. 6
DS31564
17 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
Taping Orientation
For DFN2018-6
Notes:
8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
AP2161/AP2171 Rev. 6
DS31564
18 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated
AP2161/AP2171
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
AP2161/AP2171 Rev. 6
DS31564
19 of 19
www.diodes.com
JUNE 2009
© Diodes Incorporated