PRODUCT DATASHEET Florence series last update 3/1/2018 DETAILS Product Number FS15626_FLORENCE-3R-IP-Z90 Family Florence Type Assembly Color clear Diameter 321 + 79 mm Height 9,72 mm Style rectang Optic Material PC,Silicone Holder Material Fastening Status production ready ROHS Compliant Yes Date Updated 3/01/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency XP-E sim: 89 sim: 91 % sim: 0.460 - LG 6030 90 deg 89 % NVSxx19B/NVSxx19C sim: 89 sim: 89 % sim: 0.440 - Oslon Square Gen3 cd/lm 0.440 Connector - 89 deg 88 % 0.420 - Fortimo LED Line 1ft 2000lm 8xx 3R HV278 deg 86 % 0.460 - Fortimo LED Line 1ft 1100lm xx0 3R xV2/xV3 85 deg 87 % 0.450 - Fortimo LED Line 1ft 650lm 8x0 3R xV2/xV3 86 deg 86 % 0.420 - January 25th 2018 8:08 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 8 321 65 65 65 65 22 8 9.35 Left view Scale: 1:1 79 71 7 35 18 22 7 Top view Scale: 1:1 19.49 6 3. 83.63 6 4 A 1 196.79 6.3 8.87 20 55.96 5 5 4. x1 5 4.48 26 45.07 142.35 4 1. 3 Detail A Scale: 4:1 4 Bottom view Scale: 1:1 182 4 13.22 280.6 3 Florence-3R-IP silicon sealant 3 Florence-3R-IP-Z90 Lens 2 2 1 Isometric view Scale: 1:1 Assembly Guide F15542_FLORENCE-3R-IP-Z90 1. Insert Silicone sealant into bottom of FLORENCE-3R-IP-Z90 lens 2. Set lens and silicone sealant on top of PCB 3. Fasten lens to heatsink with 14pcs of M3 screws Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Screw type DIN 7985 M3, Max torque 0.6Nm H G Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Datasheet_FLORENCE-3R-IP-Z90 SIZE A2 SCALE F C PART NUMBER 1 F15542 1:1 WEIGHT B g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.