Specialty Moisture Probes Penetrating Moisture Probes for use with select Extech Moisture Meters: MO290, MO295, MO297, and MO300 MO290-EP MO290-EXT MO290-HP MO290-P MO290-BP Extension Probe • MO290-EP ............................................ Extension Probe for Model MO290/295 Moisture Meter with 30" (76.2cm) cable and 4 pins • MO290-PINS-EP .................................... 12 Replacement pins (6) 3.5”/8.9cm & (6) 6.5”/16.5cm pin depth) and 2 lock nuts for MO290-EP probe • MO290-EXT .......................................... 11.8" (30cm) Extenders (set of 2) for MO290-EP probe Hammer Probe • MO290-HP ............................................. Hammer Probe for Model MO290/295 Moisture Meter includes 4 pins (1.6"/4cm pin depth) • MO290-PINS-HP ..................................... 20 Replacement pins (1.6"/4cm pin depth) and 2 lock nuts for MO290-HP probe Pin Probe • MO290-P ............................................... Pin Probe for Model MO290/295 Moisture Meter includes 4 pins • MO220-PINS .......................................... 50 Replacement pins (0.4"/1cm pin depth) for MO290-P probe Moisture Baseboard Probe • MO290-BP .............................................. Moisture Baseboard Probe (Dual fixed flat pins with 4.1”/10.5cm pin length) with 30” cable www.extech.com Specifications subject to change without notice. Copyright © 2009-2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. 9/16/13 - R1