0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Features Functional Block Diagram 0.25 to 3.0 GHz Frequency Range 41 dBm Output IP3 2.1 dB Noise Figure 14.5 dB Gain 23.5 dBm P1dB SOT-89 SMT Package Single Power Supply +3V to +5V Voltage Rail Ground 4 2 1 3 Ground Output Bias Input Circuit Description Absolute Maximum Ratings The CMM6004-SC is a high dynamic range amplifier designed for applications operating within the 0.25 to 3.0 GHz frequency range. It is an ideal solution for transmit and receive functions where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low NF and high IP3 at the same bias point make it an ideal transmit or receive solution when used in applications including cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz. The CMM6004-SC is packaged in a low-cost, space efficient, surface mount SOT-89 package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF and DC tested. Supply Voltage RF Input Power* Storage Temperature (Tstg) Junction Temperature Operating Temperature Thermal Resistance +6.0 V +20 dBm -55 ºC to +125 ºC 150 ºC -40 ºC to +85ºC 52 ºC/W Operation of this device above any of these parameters may cause damage. *Operation with more than 10 dBm of input power may cause 2 dB degradation in OIP3 performance. Typical Parameters Parameter Typical Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Output P1dB Noise Figure 900 1900 16.5 14.5 -18 -15 -14 -10 +41.5 +41.0 23.8 23.5 1.8 2.2 Units 2400 13.6 -15 -12 +41.0 23.0 2.3 MHz dB dB dB dBm dBm dB 1. Typical values reflect performance in recommended application circuit. Electrical Characteristics (T=25ºC) Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix fixture. Parameter Condition Min Typ Max Units Frequency Range Gain Externally matched Input Return Loss Externally matched Output IP3 Noise Figure Output P1dB Operating Current Range Supply Voltage 0.25 13.5 +38 120 3.0 14.5 -10 +41 2.1 23 150 5.0 180 GHz dB dB dBm dB dBm mA V Notes: 1. T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Typical Performance Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Application Circuit - 900 MHz S-Parameters vs Frequency Typical Performance (50 Ohm System) 20 3.3V 900 MHz 16.2 dB -19.0 dB -16.0 dB 38.0 dBm 1.8 dB Id = 173 mA 18.5 dBm S21 10 Magnitude, dB 5V Frequency 900 MHz Gain 16.5 dB Input Return Loss -18.0 dB Output Return Loss -14.0 dB OIP3 41.0 dBm Noise Figure 1.8 dB Drain Current Id = 173 mA P1dB 23.8 dBm 0 S11 -10 -20 S22 -30 0.1 1.1 2.1 3.0 Frequency, GHz CMM6004-SC SOT-89 uuuu T = 80 mil T = 70 mil RF OUT L2 47 nH L1 12 nH INPUT MATCHING NETWORK C2 T = 500 mil 56 pF uuuu RF IN Vcc 5V C1 56 pF Ref Designator C1, C2 L1 L2 Value 56 pF 12 nH 47 nH Description MCH185A560JK TOKO LL1608-F12NK TOKO LL1608-F47NK Size 0603 0603 0603 MIMIX Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Typical Performance Over Voltage CMM6004-SC Evaluation board @ 900MHz S11 Over Voltage CMM6004-SC Evaluation board @ 900MHz S21 Over Voltage 20 30 19 18 17 20 16 15 14 10 12 11 4V 3V 2V 10 9 S11 (dB) S21 (dB) 13 4V 3V 2V 0 8 7 -10 6 5 4 3 -20 2 1 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 -30 3 Freq (GHz) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 Freq (GHz) CCMM6004-SC Evaluation board @ 900MHz P1dB Over Voltage CMM6004-SC Evaluation board @ 900MHz S22 Over Voltage 26 20 15 24 10 22 Power (dBm) S22 (dB) 5 0 4V 3V 2V -5 -10 20 18 -15 16 -20 14 -25 -30 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 12 3 1.5 Freq (GHz) 2 2.5 3 3.5 4 4.5 5 5.5 Voltage (V) CCMM6004-SC Evaluation board @ 900MHz OIP3 Over Voltage 50.0 48.0 46.0 44.0 42.0 OIP3 (dBm) 40.0 38.0 36.0 34.0 32.0 30.0 28.0 26.0 24.0 22.0 20.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Voltage (V) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Distribution Charts @ 3.3V Idss @ 3.3V P1dB @ 3.3V Gain @ 3.3V OIP3 @ 3.3V Note: Sample size is 250 samples taken from 3 different wafer lots. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Application Circuit - 1900 MHz S-Parameters vs Frequency Typical Performance (50 Ohm System) S21 1900 MHz 14.5 dB -15 dB -10 dB 41.0 dBm 2.2 dB Vds = 5V, Id = 174 mA 23.5 dBm 10 Magnitude, dB 0 S11 -10 S22 -20 -30 L1 2.7 nH T = 80 mil C1 2.2 pF T = 70 mil uuuu T = 80 mil uuuu RF IN 0 CMM6004-SC SOT-89 0.5 1.0 1.5 Frequency, GHz T = 70 mil T = 500 mil uuuu Frequency Gain Input Return Loss Output Return Loss OIP3 Noise Figure Bias P1dB 20 L3 47 nH L2 6.8 nH INPUT MATCHING NETWORK Value 2.2 pF C2, C3 L1 L2 L3 56 pF 2.7 nH 6.8 nH 47 nH 2.5 3.0 RF OUT C3 56 pF Vcc 5V C2 56 pF Ref Designator C1 2.0 Description KOA 2.2pF 50V CER CAP 0603 NPO ±.25pF MCH185A560JK TOKO LL1608-F2N7S TOKO LL1608-F6N8K TOKO LL1608-F47NK Size 0603 0603 0603 0603 0603 MIMIX Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Application Circuit - 2400 MHz S-Parameters vs Frequency Typical Performance (50 Ohm System) 20 S21 2400 MHz 13.6 dB -15 dB -12 dB 41.0 dBm 2.3 dB Vds = 5V, Id = 175 mA 23.0 dBm 10 Magnitude, dB Frequency Gain Input Return Loss Output Return Loss OIP3 Noise Figure Bias P1dB 0 -10 S22 -20 -30 C1 1.2 pF T = 70 mil 0 CMM6004-SC SOT-89 0.5 1.0 T = 70 mil 1.5 Frequency, GHz T = 500 mil uuuu L1 2.2 nH T = 80 mil uuuu T = 80 mil uuuu RF IN S11 L3 47 nH L2 6.8 nH INPUT MATCHING NETWORK Value 1.2 pF C2, C3 L1 L2 L3 56 pF 2.2 nH 6.8 nH 47 nH 2.5 3.0 RF OUT C3 56 pF Vcc 5V C2 56 pF Ref Designator C1 2.0 Description PHYC 1.2pF 50V CER CAP 0603 NPO ±.25pF MCH185A560JK TOKO LL1608-F2N2S TOKO LL1608-F6N8K TOKO LL1608-F47NK Size 0603 0603 0603 0603 0603 MIMIX Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Typical Scattering Parameters (Vds = +5V, Ids = 150 mA, T = 22ºC, unmatched device in a 50 ohm system) Frequency (MHz) 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 (Mag) 0.337 0.349 0.363 0.379 0.396 0.413 0.430 0.447 0.467 0.475 0.490 0.502 0.513 0.524 0.534 0.543 0.551 0.559 0.565 0.571 0.577 0.582 0.588 0.539 0.597 0.600 0.605 0.608 S11 (Ang) -47.270 -58.240 -68.990 -79.290 -89.000 -98.120 -106.700 -114.700 -122.400 -129.600 -136.500 -143.100 -149.400 -155.500 -161.400 -167.100 -172.60 -178.000 176.800 171.500 166.400 161.400 156.500 151.600 146.800 142.000 137.200 132.500 (Mag) 7.379 7.259 7.127 6.986 6.829 6.666 6.502 6.330 6.162 5.991 5.820 5.655 5.494 5.339 5.189 5.045 4.906 4.775 4.647 4.523 4.402 4.289 4.183 4.081 3.983 3.886 3.795 3.706 S21 (Ang) 157.500 151.400 145.300 139.300 133.300 127.400 121.600 115.900 110.300 104.900 99.610 94.400 89.350 84.370 79.490 74.690 69.960 65.320 60.730 56.180 51.720 47.320 42.960 38.610 34.330 30.050 25.810 21.620 (Mag) 0.066 0.066 0.066 0.066 0.065 0.065 0.065 0.065 0.065 0.065 0.065 0.065 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.065 0.065 0.065 0.065 0.065 S12 (Ang) (Mag) -3.397 -6.123 -8.429 -10.740 -12.900 -14.990 -16.990 -18.970 -20.840 -22.900 -24.660 -26.510 -28.490 -30.130 -32.120 -34.010 -35.800 -37.620 -39.550 -41.370 -43.200 -45.090 -46.900 -48.790 -50.760 -52.670 -54.540 -56.660 0.067 0.064 0.062 0.060 0.059 0.057 0.055 0.053 0.052 0.049 0.047 0.046 0.044 0.042 0.041 0.040 0.039 0.038 0.037 0.037 0.036 0.035 0.036 0.035 0.035 0.036 0.037 0.038 S22 (Ang) -164.10 -173.50 -179.70 -173.90 -169.10 -165.00 -161.60 -158.60 -155.50 -152.50 -150.10 -147.00 -144.30 -141.50 -138.80 -136.00 -133.00 -130.00 -127.20 -124.10 -119.80 -116.00 -111.50 -106.20 -101.30 -95.96 -90.92 -85.54 S-Parameter Data Files are available online at www.mimixbroadband.com. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 8 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Physical Dimensions 4.50 [0.177] 1.55 [0.061] 0.71 [0.028] 1.73 [0.068] 0.38 [0.015] 1.70 [0.067] 4 3.48 [0.137] 0.41 [0.016] 2.50 2.06 [0.096] [0.081] 1 0.46 [0.18] 3X 2 3 4.41 [0.163] 5.33 [0.210] 0.99 [0.039] 1.27 [0.050] 0.58 [0.023] 1.50 [0.059] 3.00 [0.118] 0.38 [0.015] 0.76 [0.030] 0.64 [0.025] DIMENSIONS IN MILLIMETERS [INCHES] 0.86 [0.034] 3.86 [0.152] Example: ‘XXXX’ = Part Number (4 chars max) ‘C’ = Country of Origin (1 char) XXXXP aaaaaaa CYYWW ‘P’ = Plating Option (1 char) 6004G 5010 P0701 ‘aaaaaaa’ = Lot-Wafer Number (7 chars max) ‘YYWW’ = Date Stamp (year-year-week-week) Base Part #: Lot-Wafer #: Plating Option: Date Code: Country of Origin: Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 6004 5010 G (matte tin) 2007, week 1 Philippines Page 9 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 0.25-3.0 GHz High Dynamic Range Amplifier CMM6004-SC January 2007 - Rev 15-Jan-07 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information The CMM6004-SC is available in a surface-mount SOT-89 package and devices are available in tape and reel. Description Part Number for Ordering CMM6004-SC-0G00 Matte Tin finished RoHS compliant SOT-89 surface-mount power package in bulk quantity CMM6004-SC-0G0T Matte Tin finished RoHS compliant SOT-89 surface-mount power package in tape and reel PB-CMM6004-SC-00A0 Evaluation Board with SMA connectors for CMM6004-SC matched at 900 MHz PB-CMM6004-SC-00B0 Evaluation Board with SMA connectors for CMM6004-SC matched at 1900 MHz PB-CMM6004-SC-00C0 Evaluation Board with SMA connectors for CMM6004-SC matched at 2400 MHz We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 10 of 10 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.