HMC871LC5 v03.1010 Typical Applications Features The HMC871LC5 is ideal for: Wide Supply Range from 5V to 8V • SONET OC-192 & SDH-STM-64 Transmission Systems Adjustable Output Amplitude up to 4 Vp-p • 10 GbE Transmitters • 10 Gbps VSR Modules Low DC Power Consumption, 0.25W for Vout = 2.5 Vp-p at Vdd = 5V • Pre-driver for 40 Gbps DQPSK Modules Cross Point Adjustment • Broadband Gain Block for Test & Measurement Equipment 32 Lead 5x5mm SMT Package: 25mm² Functional Diagram General Description OPTICAL & MODULATOR DRIVERS - SMT Low Additive RMS Jitter, <300 fs The HMC871LC5 is a GaAs MMIC PHEMT Distributed Driver Amplifier packaged in a leadless 5x5mm surface mount package. The amplifier operates between DC and 20 GHz and provides 15 dB of gain. The output swing cross point is adjustable and saturated output swing is 4Vp-p. Gain flatness is excellent at ±0.5 dB as well as very low additive RMS jitter of 300 fs for 10 Gbps operation. The HMC871LC5 provides VSR and Gigabit Ethernet designers with scalable power dissipation for varying output drive requirements (<0.25W at Vout = 2.5 Vp-p and <0.6W at Vout = 4 Vp-p). The HMC871LC5 has a very wide supply (Vdd) operating range from +5V to +8V and the I/Os are internally matched to 50 Ohms. 8 8-1 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Electrical Specifications, TA = +25° C, Vdd = 8V, VC = 0.5V, Idd = 75mA* Parameter Gain Small Signal Bandwidth Conditions Min. Typ. Max. Units Frequency = 1 - 8 GHz Frequency = 8 - 16 GHz Frequency = 16 - 20 GHz 13 12 10 16 15 13.5 dB dB dB 3-dB cutoff 17.5 GHz Input Return Loss Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 20 10 dB dB Output Return Loss Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 15 10 dB dB Gain Variation Over Temperature Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 0.016 0.025 Group Delay Variation Frequency = 1 - 12 GHz ±15 ps Saturated Output Power (Psat) Frequency = 1 - 12 GHz Frequency = 12 - 20 GHz 18 16 dBm dBm 0.022 0.36 dB/°C dB/°C * Adjust Vgg between -1V to 0V to achieve Idd = 75 mA typical. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Electrical Specifications, TA = +25° C, Vdd = 8V, VC = 0.5V, Idd = 75mA* Continued Parameter Output Power for 1 dB Compression (P1dB) Conditions Min. Typ. Frequency = 1 - 12 GHz Frequency = 12 - 20 GHz 14 11 16.5 14 dBm dBm ps Rise Time [1] 20% - 80% 20 Fall Time [1] 20% - 80% 19 Additive RMS Jitter [2] Max. ps 300 Supply Current (Idd) (Vgg = -0.7V Typ.) Units 75 fs mA Bias Current Adjust (Vgg) -2 0 V Output Voltage Adjust (VC) 0 2 V Max. Units [1] Data input = 22.5 Gbps NRZ PRBS 2 -1 pattern, 0.5 Vp-p. [2] RMS jitter is calculated with 22.5 Gbps 10101... pattern. * Adjust Vgg between -1V to 0V to achieve Idd = 75mA typical. 23 Parameter Gain Small Signal Bandwidth Conditions Min. Typ. Frequency = 1 - 8 GHz Frequency = 8 - 16 GHz Frequency = 16 - 20 GHz 11.5 11 8 14.5 14 11.5 dB dB dB 3-dB cutoff 18.5 GHz Input Return Loss Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 15 10 dB dB Output Return Loss Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 10 10 dB dB Gain Variation Over Temperature Frequency = 1 - 10 GHz Frequency = 10 - 20 GHz 0.017 0.024 Group Delay Variation Frequency = 1 - 12 GHz ±15 deg Saturated Output Power (Psat) Frequency = 1 - 12 GHz Frequency = 12 - 20 GHz 14 11 dBm dBm Output Power for 1 dB Compression (P1dB) Frequency = 1 - 12 GHz Frequency = 12 - 20 GHz 11 8 dBm dBm 8 4 0.024 0.034 dB/°C dB/°C Rise Time [1] 20% - 80% 20 ps Fall Time [1] 20% - 80% 20 ps Additive RMS Jitter [2] 300 Supply Current (Idd) (Vgg = -0.8V Typ.) 50 fs mA Bias Current Adjust (Vgg) -2 0 V Output Voltage Adjust (VC) 0 2 V [1] Data input = 22.5 Gbps NRZ PRBS 2 -1 pattern, 0.5 Vp-p. [2] RMS jitter is calculated with 22.5 Gbps 10101... pattern. * Adjust Vgg between -1V to 0V to achieve Idd = 50mA typical. 23 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8 OPTICAL & MODULATOR DRIVERS - SMT Electrical Specifications, TA = +25° C, Vdd = 5V, VC = 0.5V, Idd = 50mA* 8-2 HMC871LC5 v03.1106 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Gain & Return Loss @ Vdd = 5V 25 25 15 15 S21 S11 S22 5 RESPONSE (dB) RESPONSE (dB) Gain & Return Loss @ Vdd = 8V -5 -15 -25 S21 S11 S22 5 -5 -15 -25 -35 -35 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 FREQUENCY (GHz) 8-3 25 20 20 15 10 +25C +85C -40C 5 10 12 14 16 18 20 18 20 18 20 Gain vs. Temperature @ Vdd = 5V 25 GAIN (dB) GAIN (dB) Gain vs. Temperature @ Vdd = 8V 15 10 +25C +85C -40C 5 0 0 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 FREQUENCY (GHz) 8 10 12 14 16 FREQUENCY (GHz) Psat vs. Temperature @ Vdd = 8V P1dB vs. Temperature @ Vdd = 8V 25 25 +25C +85C -40C +25C +85C -40C 22 PSAT (dBm) 22 P1dB (dBm) OPTICAL & MODULATOR DRIVERS - SMT 8 8 FREQUENCY (GHz) 19 16 13 19 16 13 10 10 0 2 4 6 8 10 12 14 FREQUENCY (GHz) 16 18 20 0 2 4 6 8 10 12 14 16 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Output Power vs. Input Power @ 10 GHz, Vdd = 5V 20 20 16 16 OUTPUT POWER (dBm) 12 +25C +85C -40C 8 4 0 12 8 +25C +85C -40C 4 0 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 INPUT POWER (dBm) 25 20 20 FALL TIME (ps) RISE TIME (ps) 25 15 Vdd = 5V Vdd = 6V Vdd = 8V 5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 6 8 10 8 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VC (V) Peak-to-Peak Jitter vs. Vdd @ 11.25 Gbps [1] Peak-to-Peak Jitter vs. Vdd @ 22.5 Gbps [2] 20 20 15 15 P-P JITTER (ps) P-P JITTER (ps) 4 Vdd = 5V Vdd = 6V Vdd = 8V VC (V) 10 Vdd = 5V Vdd = 6V Vdd = 8V 5 2 15 10 5 0 0 Fall Time vs. Vdd @ 22.5 Gbps [2] Rise Time vs. Vdd @ 22.5 Gbps [2] 10 -2 INPUT POWER (dBm) 10 Vdd = 5V Vdd = 6V Vdd = 8V 5 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VC (V) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VC (V) [1] Data input = 11.25 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p. [2] Data input = 22.5 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] OPTICAL & MODULATOR DRIVERS - SMT OUTPUT POWER (dBm) Output Power vs. Input Power @ 10 GHz, Vdd = 8V 8-4 HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Supply Current vs. Vdd @ 22.5 Gbps [3] 300 100 250 80 SUPPLY CURRENT (mA) RMS JITTER (fs) RMS Jitter vs. Vdd @ 22.5 Gbps [4] 200 150 Vdd = 5V Vdd = 6V Vdd = 8V 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 60 40 Vdd = 5V Vdd = 6V Vdd = 8V 20 0 0 0.1 0.2 0.3 0.4 VC (V) 8-5 0.6 0.7 0.8 0.9 1 Noise Figure vs. Temperature @ Vdd = 8V 6 5 NOISE FIGURE (dB) OPTICAL & MODULATOR DRIVERS - SMT 8 0.5 VC (V) +25C +85C -40C 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) 11.25 Gbps NRZ Output Eye Diagrams Measurements Current Min Max Jitter p-p 9.78 ps 7.11 ps 9.78 ps Units V Rise Time 19.6 ps 18.7 ps 19.6 ps ps Fall Time 19.6 ps 18.7 ps 19.6 ps ps Eye Amp 3.03 V 3.03 V 3.03 V ps Time scale: 40 ps/div Amplitude scale: 800 mV/div Vdd = 8V, Vin: 11.25 Gbps NRZ PRBS 231-1, 0.5 Vp-p Vout: 3.03Vp-p [1] Data input = 11.25 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p. [2] Source jitter was not de-embedded [3] Data input 22.5 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p. [4] RMS jitter is measured with 22.5 Gbps 10101...pattern For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz 11.25 Gbps NRZ Output Eye Diagrams Measurements Current Min Max Jitter p-p 11.56 ps 8.89 ps 11.56 ps Units V Rise Time 16.9 ps 16.9 ps 16.9 ps ps Fall Time 16.9 ps 16.9 ps 17.8 ps ps Eye Amp 2.60 V 2.60 V 2.60 V ps Time scale: 40 ps/div Amplitude scale: 600 V/div Vdd = 5V, Vin: 11.25Gbps NRZ PRBS 231-1, 0.5V p-p, Vout: 2.60Vp-p 8 22.5 Gbps NRZ Output Eye Diagrams Measurements Min Max Units Jitter p-p 9.333 ps 8.000 ps 9.333 ps V Rise Time 17.78 ps 17.78 ps 18.67 ps ps Fall Time 17.78 ps 17.33 ps 18.67 ps ps Eye Amp 3.00 V 3.00 V 3.00 V ps Time scale: 20 ps/div Amplitude scale: 800 mV/div Vdd = 8V, Vin: 22.5 Gbps NRZ PRBS 231-1, 0.5 Vp-p Vout: 3.00Vp-p 22.5 Gbps NRZ Output Eye Diagrams Measurements Current Min Max Units Jitter p-p 10.667 ps 8.889 ps 11.556 ps V Rise Time 16.00 ps 10.67 ps 16.00 ps ps Fall Time 17.78 ps 16.89 ps 17.78 ps ps Eye Amp 2.63 V 2.63 V 2.64 V ps Time scale: 20 ps/div Amplitude scale: 800 V/div Vdd = 5V, Vin: 22.5Gbps NRZ PRBS 231-1, 0.5V p-p, Vout: 2.63Vp-p For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] OPTICAL & MODULATOR DRIVERS - SMT Current 8-6 HMC871LC5 v03.1010 Absolute Maximum Ratings Drain Bias Voltage (Vdd) +9V Gate Bias Voltage (Vgg) -2 to 0V Control Bias Voltage (VC) (Vdd -8) to Vdd (V) RF Input Power (RFIN)(Vdd = +8 Vdc) +10 dBm Channel Temperature 175 °C Continuous Pdiss (T = 85 °C) (derate 15.08 mW/°C above 85 °C) 1.35 W Thermal Resistance (channel to ground paddle) 66.31 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Typical Supply Current vs. Vdd Vdd (V) Idd (mA)* Power Dissipation (W) +5 50 0.25 +6 60 0.36 +8 75 0.60 * Adjust Vgg between -1V and 0V to achieve Idd shown. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS OPTICAL & MODULATOR DRIVERS - SMT 8 8-7 Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Pin Descriptions Function Description 1, 3, 4, 7 - 12, 14, 16 - 20, 23 - 29, 31 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 2 VC Output voltage swing adjust. +0.5V should be applied for nominal operation. 5 RFIN This pin is DC coupled and matched to 50 Ohms. DC blocking is required. 6, 21 GND These pins and exposed package base must be connected to RF/DC ground. 13 ACG2 Low frequency termination. Attach bypass capacitor per application circuit herein. 15 Vgg Gate control for amplifier. Please follow “MMIC Amplifier Biasing Procedure” application note. 22 RFOUT This pin is DC coupled and matched to 50 Ohms. DC blocking is required. 30 ACG1 Low frequency termination. Attach bypass capacitor per application circuit herein. 32 Vdd Power supply for the amplifier. External bypass capacitors are required. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8 OPTICAL & MODULATOR DRIVERS - SMT Pin Number 8-8 HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Evaluation PCB OPTICAL & MODULATOR DRIVERS - SMT 8 8-9 List of Materials for Evaluation PCB 127517 Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 2mm Molex Header C1 4.7 µF Capacitor, Tantalum C2, C3 1000 pF Capacitor, 0402 Pkg. C4, C9 100 pF Capacitor, 0402 Pkg. C5 0.1 µF Capacitor, 0603 Pkg. C6 0.01 µF Capacitor, 0603 Pkg. C7 2.2 µF Capacitor, 0603 Pkg. C8 1000 pF Capacitor, 0603 Pkg. U1 HMC871LC5, Modulator Driver PCB [2] 127381 Evaluation PCB [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC871LC5 v03.1010 EA OPTICAL MODULATOR DRIVER, DC - 20 GHz Application Circuit Device Operation These devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. The input to this device should be AC-coupled. To provide the typical 4Vp-p output voltage swing, a 0.5Vp-p AC coupled input voltage swing is required. Device Power Up Instructions 1. Ground the device, no RF signal applied to device 2. Set Vgg to -2V (no drain current) 3. Set VC to +0.5V (no drain current) 4. Set Vdd to +5V or +8V (no drain current) 5. Adjust Vgg for Idd = 50mA (Vdd = 5V) or Idd = 75mA (Vdd = 8V) 6. Apply RF signal. • Vgg may be varied between -1V and 0V to provide the desired eye crossing point percentage (i.e. 50% crosspoint) and a limited cross point control capability (±20%) Device Power Down Instructions 1. Reverse the sequence identified above in steps 1 through 6. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] OPTICAL & MODULATOR DRIVERS - SMT 8 8 - 10