EIC FR802 Fast recovery Datasheet

Certificate TH97/10561QM
FR801 - FR805
FAST RECOVERY
RECTIFIER DIODES
TO-220AC
PRV : 50 - 600 Volts
Io : 8.0 Amperes
0.154(3.91)DIA.
0.148(3.74)
0.415(10.54)MAX.
FEATURES :
*
*
*
*
*
*
*
Certificate TW00/17276EM
0.113(2.87)
0.103(2.62)
High current capability
High surge current capability
High reliability
Low reverse current
Low forward voltage drop
Fast switching for high efficiency
Pb / RoHS Free
0.185(4.70)
0.175(4.44)
0.055(1.39)
0.045(1.14)
0.145(3.68)
0.135(3.43)
0.635(16.13)
0.625(15.87)
0.603(15.32)
0.573(14.55)
0.350(8.89)
0.330(8.39)
1
2
0.160(4.06)
0.140(3.56)
PIN 1
0.560(14.22)
0.530(13.46)
CASE
PIN 2
MECHANICAL DATA :
0.037(0.94)
0.027(0.68)
0.205(520)
0.195(4.95)
* Case : Epoxy, Molded
* Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
0.022(0.56)
0.014(0.36)
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL FR801 FR802 FR803 FR804 FR805
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
V
Maximum Average Forward Current
IF(AV)
8.0
A
IFSM
150
A
Maximum Peak Forward Voltage at I F = 8 A
VF
1.3
V
Maximum Reverse Current at
Tc = 25 °C
IR
10
μA
Rated DC Blocking Voltage
Tc = 100 °C
IR(H)
150
μA
Half-Wave Resistive Load
Tc = 100 °C
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Reverse Recovery Time ( Note 1 )
Trr
Typical Junction Capacitance( Note 2)
CJ
70
pF
TJ, TSTG
- 65 to + 175
°C
Operating and Storage Temperature Range
150
250
ns
Notes :
(1) Reverse Recovery Test Conditions : I F = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0V.
Page 1 of 2
Rev. 02 : July 28, 2006
Certificate TH97/10561QM
Certificate TW00/17276EM
RATING AND CHARACTERISTIC CURVES ( FR801 - FR805 )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
Trr
10 Ω
+ 0.5 A
D.U.T.
+
0
PULSE
GENERATOR
( NOTE 2 )
50 Vdc
(approx)
1Ω
- 0.25 A
OSCILLOSCOPE
( NOTE 1 )
- 1.0 A
SET TIME BASE FOR 50/100 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
1 cm
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.2 - FORWARD CURRENT DERATING CURVE
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
150
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD
CURRENT, (A)
10
8
6
4
60Hz Resistive load
or Inductive load
2
0
0
25
50
75
100
125
150
90
60
30
0
175
8.3 ms Single Half Sine Wave
JEDEC Method
120
1
2
CASE TEMPERATURE, ( °C)
4
6
10
20
40
60 100
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL INSTANTANEOUS FORWARD
FIG.5 - TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS
10
INSTANTANEOUS REVERSE
CURRENT, (μA)
INSTANTANEOUS FORWARD
CURRENT, (A)
100
10
1
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD
VOLTAGE, (V)
Page 2 of 2
1.8
1.0
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
Rev. 02 : July 28, 2006
Similar pages