Micro SIDELED® Enhanced optical Power LED (ATON®) LW Y87C Besondere Merkmale • Gehäusetyp: weißes SMT Gehäuse • Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik; ideal für Hinterleuchtungen und Einkopplungen in Lichtleiter • Farbort: x = 0,33, y = 0,33 nach CIE 1931 (weiß) • typische Farbtemperatur: 5600 K • Farbwiedergabeindex: 80 • Abstrahlwinkel: Lambertscher Strahler (120°) • Technologie: InGaN • optischer Wirkungsgrad: 10 lm/W • Gruppierungsparameter: Lichtstärke, Farbort • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten und Wellenlöten (TTW) • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 8 mm Gurt mit 3000/Rolle, ø180 mm oder 10000/Rolle, ø330 mm • ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Features • package: white SMT package • feature of the deivce: small package with extremely wide viewing angle; ideal for backlighting and coupling in light guides • color coordinates: x = 0.33, y = 0.33 acc. to CIE 1931 (white) • typ. color temperature: 5600 K • color reproduction index: 80 • viewing angle: Lambertian Emitter (120°) • technology: InGaN • optical efficiency: 10 lm/W • grouping parameter: luminous intensity, color coordinates • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering and TTW soldering • preconditioning: acc. to JEDEC Level 2 • taping: 8 mm tape with 3000/reel, ø180 mm or 10000/reel, ø330 mm • ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993 Anwendungen • Hinterleuchtung (LCD, Mobiltelefone, Schalter, Tasten, Displays, Werbebeleuchtung) • optimierte Einkopplung in Lichtleiter • Signal- und Symbolleuchten Applications 2003-03-04 • backlighting (LCD, mobile phones, switches, keys, displays, illuminated advertising) • optimized coupling into light guides • signal and symbol luminaire 1 LW Y87C Typ Emissionsfarbe Type Color of Emission LW Y87C-S1T1-3C5D LW Y87C-T1U1-3C5D white LW Y87C-S1T1-2C5D LW Y87C-T1U1-2C5D white Lichtstärke Lichtstrom Bestellnummer Luminous Intensity IF = 20 mA IV (mcd) Luminous Flux IF = 20 mA ΦV (mlm) Ordering Code colored diffused 180 ... 355 280 ... 560 800 (typ.) 1250 (typ.) Q65110A0573 Q65110A0574 colored diffused 180 ... 355 280 ... 560 800 (typ.) 1250 (typ.) on request on request Farbe der Lichtaustrittsfläche Color of the Light Emitting Area Anm.: -2C5D Farbselektiert nach Farbortgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 2 bzw. 3 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -2C5D Color selection acc. to Chromaticity coordinate groups (see page 5) The standard shipping format for serial types includes a lower or upper family group of 2 or 3 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2003-03-04 2 LW Y87C Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top – 40 … + 100 °C Lagertemperatur Storage temperature range Tstg – 40 … + 100 °C Sperrschichttemperatur Junction temperature Tj + 110 °C Durchlassstrom Forward current IF 20 mA Stoßstrom Surge current t ≤ 10 µs, D = 0.005 IFM 300 mA Sperrspannung1) Reverse voltage VR 5 V Leistungsaufnahme Power consumption TA ≤ 25 °C Ptot 85 mW 600 K/W 350 K/W Wärmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 5 mm 2) mounted on PC board FR 4 (pad size ≥ 5 mm 2) 1) für kurzzeitigen Betrieb geeignet / suitable for short term application 2003-03-04 3 LW Y87C Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Farbkoordinate x nach CIE 1931 1) (typ.) Chromaticity coordinate x acc. to CIE 1931 IF = 20 mA x 0.33 – Farbkoordinate y nach CIE 19311) (typ.) Chromaticity coordinate y acc. to CIE 1931 IF = 20 mA y 0.33 – Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2ϕ 120 Grad deg. Durchlassspannung 2) Forward voltage IF = 20 mA (min.) (typ.) (max.) VF VF VF 3.0 3.6 4.1 V V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 µA µA Temperaturkoeffizient von x Temperature coefficient of x IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCx – 0.1 10-3/K Temperaturkoeffizient von y Temperature coefficient of y IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCy – 0.2 10-3/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCV – 3.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) ηopt 10 lm/W 1) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±0.01. 2) Durchlassspannungsgruppen werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,05 V ermittelt. Forward voltage groups are tested at a current pulse duration of 1 ms and a tolerance of ±0.05 V. 2003-03-04 4 LW Y87C 1) Farbortgruppen Chromaticity coordinate groups 0.43 0.41 Cy 0.39 0.9 520 530 0.8 0.37 540 Cy 510 550 0.7 5D 5C 0.35 560 0.6 0.5 580 + 0.3 490 0.2 E 3D 0.29 3C 0.27 480 470 460 450 0.1 0 0.1 0.2 2D 0.25 0.3 0.4 4C 0.31 590 600 610 620 630 0.4 0 4D 0.33 570 500 0.5 0.6 0.7 0.8 2C 0.23 0.9 Cx 0.19 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.21 Cx OHA05327 2003-03-04 5 LW Y87C Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstärke Luminous Intensity IV (mcd) Lichtstrom Luminous Flux ΦV (mlm) S1 S2 T1 T2 U1 U2 180 ... 224 224 ... 280 280 ... 355 355 ... 450 450 ... 560 560 ... 710 600 (typ.) 760 (typ.) 950 (typ.) 1200 (typ.) 1500 (typ.) 1900 (typ.) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S2-4D Example: S2-4D Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Farbortgruppe Chromaticity Coordinate Group S 2 4D 2003-03-04 6 LW Y87C Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve OHL01461 100 % I rel 80 Vλ 60 40 20 0 400 450 500 550 600 650 700 nm 750 λ Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2003-03-04 0.8 0.6 0.4 0˚ 20˚ 7 40˚ 60˚ 80˚ 100˚ 120˚ LW Y87C Durchlassstrom IF = f (VF) Forward Current TA = 25 °C Relative Lichtstärke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 °C OHL11462 10 2 mA IF 5 OHL01518 10 1 IV I V (20 mA) 10 0 10 1 5 5 10 -1 5 10 0 10 -2 5 5 10 -1 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 -3 10 -1 V 6.0 5 10 0 5 10 1 mA 10 2 IF VF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Relative Lichtstärke IV/IV(25 °C) = f (TA) Relative Luminous Intensity IF = 20 mA OHL00202 25 I F mA IV OHL02870 1.4 I V (25 ˚C) t ml > 1500 h 1.2 20 1.0 TS 15 0.8 TA 0.6 10 0.4 5 0.2 TA temp. ambient TS temp. solder point 0 0 20 40 60 0 -60 -40 -20 0 80 ˚C 100 T 2003-03-04 20 40 60 ˚C 100 T 8 LW Y87C Farbortverschiebung x, y = f (IF) Chromaticity Coordinate Shift TA = 25 °C OHL01614 0.350 Cx, Cy 0.345 0.340 0.335 0.330 Cx 0.325 Cy 0.320 0.315 0.310 0 10 20 30 40 mA 60 IF Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 °C Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 °C OHL11405 0.35 IF A t D = TP IF IF A T 0.25 0.15 0.10 IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.08 0.06 0.04 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.02 0.05 0 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 2 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2003-03-04 t D = TP tP 0.10 D= 0.20 OHL11406 0.14 tP 9 LW Y87C Maßzeichnung Package Outlines 0.25 (0.010) 0.20 (0.008) (15˚) 0.3 (0.012) 0.5 (0.020) 1.0 (0.039) 2.1 (0.083) 1.2 (0.047) 0.7 (0.028) Light emitting area typ. 1.7 × 0.7 2.3 (0.091) Cathode (0.4 (0.016)) 0.5 (0.020) 2.9 (0.114) 3.1 (0.122) 0 ... 0.1 (0 ... 0.004) (0.6 (0.024)) 1.3 (0.051) 1.1 (0.043) GPLY6058 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 6 mg 2003-03-04 10 LW Y87C Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 ˚C T 250 240-245 ˚C 10-40 s 200 183 ˚C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2003-03-04 11 s 250 LW Y87C Wellenlöten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskühlung forced cooling 0 0 50 100 150 200 t 2003-03-04 12 s 250 LW Y87C Empfohlenes Lötpaddesign Recommended Solder Pad IR Reflow Löten IR Reflow Soldering Bauteil positioniert Component location on pad A C A C 0.7 (0.028) 2.2 (0.087) 0.8 (0.031) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Lötstopplack Solder resist OHPY1315 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gehäuse hält TTW-Löthitze aus / Package able to withstand TTW-soldering heat Verpackungseinheit 3000/Rolle, ø180 mm oder 10000/Rolle, ø330 mm Method of Taping / Polarity and Orientation Packing unit 3000/reel, ø180 mm or 10000/reel, ø330 mm 2 (0.079) 1.25 (0.049) C 3.3 (0.130) 8.1 (0.319) 2.4 (0.094) 1.5 (0.059) 3.5 (0.138) 4 (0.157) 1.75 (0.069) Gurtung / Polarität und Lage 0.9 (0.035) 0.3 (0.012) max. 1.4 (0.055) Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2003-03-04 A 13 OHAY1515 LW Y87C Revision History: 2003-03-04 Previous Version: Date of change 2002-11-18 Page Subjects (major changes since last revision) 2 luminous intensity grouping 4 optical efficiency 4 forward voltage 8 max. permissible forward current 3 power consumption from 90 mW to 85 mW 8 diagram luminous intensity from OHL01462 to OHL11462 8 diagram relative luminous intensity OHL01637 to OHL02870 9 new diagrams OHL11405 and OHL11406 (permissible pulse handling capability) 2 wavelength grouping for white 3 surge current from t.b.d. to 300mA 3 pad size from 16 mm2 to 5 mm2 14 annotations 2002-07-25 3 reverse voltage (footnote) 2002-08-21 2, 5 new luminous intensity groups and new ordering codes 2002-10-25 2, 5 Chromaticity coordinate groups 2002-11-18 14 new patent no. 2003-03-04 2003-03-04 14 LW Y87C Patent List Patent No. US 6 066 861, US 6 277 301, US 6 245 259 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don’t represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2003-03-04 15