MIL-C-24682 230-020 Hermetic Receptacle, Solder Mount, Crimp Contacts MIL-C-26482 Series II, MS3473 Type HOW TO ORDER: EXAMPLE: 230 - 020 10 - 6 D X BASIC SERIES .060 WIDTH POLARIZING STRIPE MASTER POLARIZING KEYWAY SHELL SIZE CONTACT ARRANGEMENT PER MIL-STD-1669 5 A CONTACT STYLE "D" = PIN, CRIMP REAR, REMOVABLE B F C E D 5 ALTERNATE INSERT POSITION (LEAVE BLANK FOR NORMAL) øA øK L MAX .047 .026 F VITREOUS INSERT PERIPHERAL GASKET REAR INSULATOR ASSEMBLY 30- 020H C TABLE I: LAYOUTS INTERFACIAL SEAL 2 PANEL CUT-OUT SHELL SIZE PART IDENT. 2 .140 MIN .070 ±.031 WIDE BLUE COLOR BAND LOCATED WITHIN .125 OF FLANGE 8 -6, -98 12 -3, -8, -10 -5, -12, -15, -18, -19 16 -8, -23, -99 18 -11, -30, -32 20 -16, -24, -27, -39, -41 22 -21, -32, -34, -41, -55 24 -2, -3, -4, -33, -98 10 14 2004 Glenair, Inc. © AVAILABLE CONTACT ARRANGEMENTS -31, -61 CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-12 E-Mail: [email protected] 230-020 MIL-C-24682 230-020 Hermetic Receptacle, Solder Mount, Crimp Contacts MIL-C-26482 Series II, MS3473 TypeSOLDER HERMETIC RECEPTACLE, MOUNT, SOLDERLESS CONTACTS MIL-C-26482 SRS 2, MS3473 TYPE TABLE II: CONNECTOR DIMNESIONS SHELL SIZE Aø ±.010 (0.3) Cø F K L MAX MAX. WEIGHT (LBS) 8 .625 (15.9) .563/.557 (14.3/14.1) .735/.711 (18.7/18.1) .570 (14.5) 1.078 (27.4) TBD 10 .750 (19.1) .673/.667 (17.1/16.9) .735/.711 (18.7/18.1) .680 (17.3) 1.078 (27.4) TBD 12 .844 (21.4) .782/.776 (19.9/19.7) .735/.711 (18.7/18.1) .789 (20.0) 1.078 (27.4) TBD 14 .969 (24.6) .907/.901 (23.0/22.9) .735/.711 (18.7/18.1) .914 (23.2) 1.078 (27.4) TBD 16 1.094 (27.8) 1.032/1.026 (26.2/26.1) .735/.711 (18.7/18.1) 1.039 (26.4) 1.078 (27.4) TBD 18 1.218 (30.9) 1.157/1.151 (29.4/29.2) .735/.711 (18.7/18.1) 1.164 (29.6) 1.078 (27.4) TBD 20 1.312 (33.3) 1.251/1.245 (31.8/31.6) .823/.799 (20.9/20.3) 1.258 (32.0) 1.140 (29.0) TBD 22 1.438 (36.5) 1.376/1.371 (35.0/34.8) .823/.799 (20.9/20.3) 1.383 (35.1) 1.140 (29.0) TBD 24 1.564 (39.7) 1.501/1.495 (38.1/38.0) .823/.799 (20.9/20.3) 1.508 (38.3) 1.140 (29.0) TBD NOTES: 1. MATERIAL/FINISH: SHELL - C1215 CRS / TIN PLATED CONTACTS - 52 NICKEL ALLOY / TIN PLATED BAYONETS: STAINLESS STEEL / PASSIVATED SEALS: SILICONE ELASTOMER INSULATION: GLASS, NOIBN REAR INSULATOR: RIGID DIELECTRIC 2 ASSEMBLY TO BE IDENTIFIED WITH GLENAIR'S NAME, PART NUMBER AND DATE CODE SPACE PERMITTING. 3. PERFORMANCE: _ HERMETICITY: <1 X 10^-7 SCCHE/SEC @ 1 ATMOSPHERE DIFFERENTIAL DIELECTRIC WITHSTANDING VOLTAGE: CONSULT FACTORY OR MIL-STD-1669 INSULATION RESISTANCE: 5000 MEGOHMS MIN @ 500VDC 4. GLENAIR 230-020 WILL MATE WITH ANY QPL MIL-C-26482 SERIES 2 BAYONET COUPLING PLUG OF SAME SIZE AND INSERT POLARIZATION. 5 SEE TABLE I ON SHEET 2 FOR AVAILABLE ARRANGEMENT OPTIONS. 6. CONNECTORS ARE SUPPLIED WITH APPLICABLE CRIMP CONTACTS PER MIL-C-39029/15-**-** AND MS3160-** INSERT & REMOVAL TOOL 2004 Glenair, Inc. © CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-13 E-Mail: [email protected]