ON MBRD620CT Switchmode power rectifier Datasheet

MBRD620CT, MBRD630CT,
MBRD640CT, MBRD650CT,
MBRD660CT
MBRD620CT, MBRD640CT and MBRD660CT are Preferred Devices
SWITCHMODE
Power Rectifiers
http://onsemi.com
DPAK−3 Surface Mount Package
. . . in switching power supplies, inverters and as free wheeling
diodes, these state−of−the−art devices have the following features.
SCHOTTKY BARRIER
RECTIFIERS
6.0 AMPERES, 20 − 60 VOLTS
Features
•
•
•
•
Pb−Free Packages are Available
Extremely Fast Switching
Extremely Low Forward Drop
Platinum Barrier with Avalanche Guardrings
1
4
3
Mechanical Characteristics
MARKING
DIAGRAM
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped 75 Units Per Plastic Tube
Available in 16 mm Tape and Reel, 2500 Units Per Reel,
by Adding a “T4’’ Suffix to the Part Number
4
DPAK
CASE 369C
1 2
YWW
B
6x0T
3
Y
WW
x
= Year
= Work Week
= 2, 3, 4, 5 or 6
ORDERING INFORMATION
See detailed ordering and shipping information in the
package dimensions section on page 3 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2004
August, 2004 − Rev. 4
1
Publication Order Number:
MBRD620CT/D
MBRD620CT, MBRD630CT, MBRD640CT, MBRD650CT, MBRD660CT
MAXIMUM RATINGS
MBRD
Rating
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
TC = 130°C (Rated VR)
VRRM
VRWM
VR
Per Diode
Per Device
620CT
630CT
640CT
650CT
660CT
20
30
40
50
60
Unit
V
IF(AV)
3
6
A
Peak Repetitive Forward Current, TC = 130°C
(Rated VR, Square Wave, 20 kHz) Per Diode
IFRM
6
A
Nonrepetitive Peak Surge Current − (Surge applied at rated load
conditions halfwave, single phase, 60 Hz)
IFSM
75
A
Peak Repetitive Reverse Surge Current (2 s, 1 kHz)
IRRM
1
A
Operating Junction Temperature
TJ
−65 to +150
°C
Storage Temperature
Tstg
−65 to +175
°C
Voltage Rate of Change (Rated VR)
dv/dt
10,000
V/s
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not
implied, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS PER DIODE
Maximum Thermal Resistance − Junction−to−Case
RJC
6
°C/W
Maximum Thermal Resistance − Junction−to−Ambient (Note 1)
RJA
80
°C/W
ELECTRICAL CHARACTERISTICS PER DIODE
Maximum Instantaneous Forward Voltage (Note 2)
iF = 3 Amps, TC = 25°C
iF = 3 Amps, TC = 125°C
iF = 6 Amps, TC = 25°C
iF = 6 Amps, TC = 125°C
VF
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TC = 25°C)
(Rated dc Voltage, TC = 125°C)
iR
V
0.7
0.65
0.9
0.85
mA
0.1
15
1. Rating applies when surface mounted on the minimum pad size recommended.
2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
MBRD620CT, MBRD630CT, MBRD640CT, MBRD650CT, MBRD660CT
ORDERING INFORMATION
Package
Shipping†
DPAK
2500 Tape & Reel
DPAK
(Pb−Free)
2500 Tape & Reel
MBRD630CTT4
DPAK−3
2500 Tape & Reel
MBRD640CTT4
DPAK−3
2500 Tape & Reel
DPAK−3
(Pb−Free)
2500 Tape & Reel
MBRD650CT
DPAK−3
75 Units / Rail
MBRD650CTT4
DPAK−3
2500 Tape & Reel
MBRD660CT
DPAK−3
75 Units / Rail
MBRD660CTG
DPAK−3
(Pb−Free)
75 Units / Rail
MBRD650CTRL
DPAK−3
1800 Tape & Reel
DPAK−3
(Pb−Free)
1800 Tape & Reel
DPAK−3
2500 Tape & Reel
DPAK−3
(Pb−Free)
2500 Tape & Reel
Device
MBRD620CTT4
MBRD620CTT4G
MBRD640CTT4G
MBRD650CTRLG
MBRD660CTT4
MBRD660CTT4G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MBRD620CT, MBRD630CT, MBRD640CT, MBRD650CT, MBRD660CT
TYPICAL CHARACTERISTICS
100
100
TJ = 150°C
I R , REVERSE CURRENT (mA)
70
50
30
125°C
1.0
75°C
0.1
0.01
25°C
10
0.001
7.0
0
40
20
30
50
VR, REVERSE VOLTAGE (VOLTS)
10
5.0
3.0
Figure 2. Typical Reverse Current,* Per Leg
125°C
2.0
150°C
1.0
TC = 25°C
0.7
75°C
0.5
0.3
0.2
0.1
70
60
*The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these curves if VR is sufficient below rated VR.
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
20
10
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
14
13
12
11
10
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
SINE
WAVE
5
10
IPK/IAV = 20
SQUARE
WAVE
dc
TJ = 150°C
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 1. Typical Forward Voltage, Per Leg
Figure 3. Average Power Dissipation, Per Leg
http://onsemi.com
4
10
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
8.0
RATED VOLTAGE APPLIED
7.0
RJC = 6°C/W
6.0
TJ = 150°C
5.0
SINE
WAVE
OR
SQUARE
WAVE
4.0
3.0
2.0
dc
1.0
0
80
90
100
110
120
140
130
150
160
4.0
RJA = 80°C/W
SURFACE MOUNTED ON MIN.
PAD SIZE RECOMMENDED
TJ = 150°C
3.5
3.0
dc
SQUARE WAVE
OR
SINE WAVE
2.5
VR = 25 V
2.0
1.5
VR = 60 V
1.0
0.5
0
0
20
40
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
TA, AMBIENT TEMPERATURE (°C)
Figure 4. Current Derating, Case, Per Leg
Figure 5. Current Derating, Ambient, Per Leg
1K
C, CAPACITANCE (pF)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
MBRD620CT, MBRD630CT, MBRD640CT, MBRD650CT, MBRD660CT
TJ = 25°C
100
10
0
10
20
30
40
50
60
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Capacitance, Per Leg
http://onsemi.com
5
70
160
MBRD620CT, MBRD630CT, MBRD640CT, MBRD650CT, MBRD660CT
PACKAGE DIMENSIONS
DPAK
CASE 369C
ISSUE O
−T−
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
SEATING
PLANE
E
R
4
Z
A
S
1
2
DIM
A
B
C
D
E
F
G
H
J
K
L
R
S
U
V
Z
3
U
K
F
J
L
H
D
G
2 PL
0.13 (0.005)
M
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.045
0.180 BSC
0.034 0.040
0.018 0.023
0.102 0.114
0.090 BSC
0.180 0.215
0.025 0.040
0.020
−−−
0.035 0.050
0.155
−−−
MILLIMETERS
MIN
MAX
5.97
6.22
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.14
4.58 BSC
0.87
1.01
0.46
0.58
2.60
2.89
2.29 BSC
4.57
5.45
0.63
1.01
0.51
−−−
0.89
1.27
3.93
−−−
T
SOLDERING FOOTPRINT*
6.20
0.244
3.0
0.118
2.58
0.101
5.80
0.228
1.6
0.063
6.172
0.243
SCALE 3:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MBRD620CT/D
Similar pages