FERROXCUBE DATA A SH SHEET EET E43/10/28 Planar E cores and accessories Supersedes data of February 2002 2004 Sep 01 Ferroxcube Planar E cores and accessories E43/10/28 CORES Effective core parameters of a set of E cores SYMBOL PARAMETER VALUE Σ(I/A) core factor (C1) 0.276 mm−1 Ve effective volume 13900 mm3 Ie effective length 61.1 mm Ae effective area 229 mm2 Amin minimum area 229 mm2 m mass of core half ≈ 35 g 43.2 ±0.9 handbook, halfpage UNIT 34.7 min. 8.1 ±0.2 5.4 ±0.13 9.5 ±0.13 27.9 ±0.6 R0.64 ref. typ. R0.81 ref. typ. CBW411 Dimensions in mm. Fig.1 E43/10/28 core half. Effective core parameters of an E/PLT combination SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.226 mm−1 Ve effective volume 11500 mm3 Ie effective length 50.4 mm Ae effective area 229 mm2 Amin minimum area 229 mm2 m mass of core half ≈ 24 g handbook, halfpage 43.2 ±0.9 4.1 ±0.13 Ordering information GRADE 27.9 ± 0.6 TYPE NUMBER 3C90 PLT43/28/4-3C90 3C92 PLT43/28/4-3C92 3C93 PLT43/28/4-3C93 3C94 PLT43/28/4-3C94 3F3 PLT43/28/4-3F3 3F4 PLT43/28/4-3F4 CBW412 R0.64 ref. typ. Dimensions in mm. Fig.2 PLT43/28/4. 2004 Sep 01 2 Ferroxcube Planar E cores and accessories E43/10/28 Core halves for use in combination with an E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 40 ±20 N, unless stated otherwise. GRADE AL (nH) AIR GAP (µm) µe TYPE NUMBER 250 ±3%(1) ≈ 55 ≈ 1100 E43/10/28-3C90-E250-E ±3%(1) ≈ 69 ≈ 800 E43/10/28-3C90-E315-E 400 ±3%(1) ≈ 87 ≈ 700 E43/10/28-3C90-E400-E ≈ 138 ≈ 400 E43/10/28-3C90-A630-E 1000 ±10% ≈ 219 ≈ 250 E43/10/28-3C90-A1000-E 8030 ±25% ≈ 1710 ≈0 E43/10/28-3C90 3C92 6300 ±25% ≈ 1380 ≈0 E43/10/28-3C92 3C93 7310 ±25% E43/10/28-3C93 3C90 315 630 ±5% 3C94 ≈ 1610 ≈0 ±3%(1) ≈ 55 ≈ 1100 E43/10/28-3C94-E250-E 315 ±3%(1) ≈ 69 ≈ 800 E43/10/28-3C94-E315-E ±3%(1) ≈ 87 ≈ 700 E43/10/28-3C94-E400-E 250 400 3F3 630 ±5% ≈ 138 ≈ 400 E43/10/28-3C94-A630-E 1000 ±10% ≈ 219 ≈ 250 E43/10/28-3C94-A1000-E 8030 ±25% ≈ 1710 ≈0 ±3%(1) ≈ 55 ≈ 1100 E43/10/28-3F3-E250-E 315 ±3%(1) ≈ 69 ≈ 800 E43/10/28-3F3-E315-E ±3%(1) ≈ 87 ≈ 700 E43/10/28-3F3-E400-E 250 400 3F4 E43/10/28-3C94 630 ±5% ≈ 138 ≈ 400 E43/10/28-3F3-A630-E 1000 ±10% ≈ 219 ≈ 250 E43/10/28-3F3-A1000-E 7310 ±25% ≈ 1600 ≈0 ±3%(1) ≈ 55 ≈ 1100 E43/10/28-3F4-E250-E 315 ±3%(1) ≈ 69 ≈ 800 E43/10/28-3F4-E315-E ±3%(1) ≈ 87 ≈ 700 E43/10/28-3F4-E400-E 630 ±5% ≈ 138 ≈ 400 E43/10/28-3F4-A630-E 1000 ±10% ≈ 219 ≈ 250 E43/10/28-3F4-A1000-E 3860 ±25% ≈ 850 ≈0 250 400 E43/10/28-3F3 E43/10/28-3F4 Note 1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 40 ±20 N. 2004 Sep 01 3 Ferroxcube Planar E cores and accessories E43/10/28 Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 40 ±20 N. GRADE 3C90 AIR GAP (µm) AL (nH) µe 250 ±3% ≈ 45 ≈ 1100 E43/10/28-3C90-A250-P 315 ±3% ≈ 57 ≈ 800 E43/10/28-3C90-A315-P 400 ±3% ≈ 72 ≈ 700 E43/10/28-3C90-A400-P 630 ±5% ≈ 113 ≈ 400 E43/10/28-3C90-A630-P 1000 ±10% ≈ 180 ≈ 250 E43/10/28-3C90-A1000-P TYPE NUMBER 9250 ±25% ≈ 1710 ≈0 E43/10/28-3C90 3C92 7460 ±25% ≈ 1340 ≈0 E43/10/28-3C92 3C93 8700 ±25% ≈ 1560 ≈0 E43/10/28-3C93 3C94 250 ±3% ≈ 45 ≈ 1100 E43/10/28-3C94-A250-P 315 ±3% ≈ 57 ≈ 800 E43/10/28-3C94-A315-P 400 ±3% ≈ 72 ≈ 700 E43/10/28-3C94-A400-P 630 ±5% ≈ 113 ≈ 400 E43/10/28-3C94-A630-P 1000 ±10% ≈ 180 ≈ 250 E43/10/28-3C94-A1000-P 9250 ±25% ≈ 1710 ≈0 250 ±3% ≈ 45 ≈ 1100 E43/10/28-3F3-A250-P 315 ±3% ≈ 57 ≈ 800 E43/10/28-3F3-A315-P 400 ±3% ≈ 72 ≈ 700 E43/10/28-3F3-A400-P 630 ±5% ≈ 113 ≈ 400 E43/10/28-3F3-A630-P 1000 ±10% ≈ 180 ≈ 250 E43/10/28-3F3-A1000-P 8700 ±25% ≈ 1560 ≈0 250 ±3% ≈ 45 ≈ 1100 E43/10/28-3F4-A250-P 315 ±3% ≈ 57 ≈ 800 E43/10/28-3F4-A315-P 400 ±3% ≈ 72 ≈ 700 E43/10/28-3F4-A400-P 630 ±5% ≈ 113 ≈ 400 E43/10/28-3F4-A630-P 1000 ±10% ≈ 180 ≈ 250 E43/10/28-3F4-A1000-P 4660 ±25% ≈ 850 ≈0 3F3 3F4 2004 Sep 01 4 E43/10/28-3C94 E43/10/28-3F3 E43/10/28-3F4 Ferroxcube Planar E cores and accessories E43/10/28 Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C E+E43-3C90 ≥320 ≤ 1.8 − − E+PLT43-3C90 ≥320 ≤ 1.5 − − E+E43-3C92 ≥370 ≤ 1.4 ≤ 8.0 − E+PLT43-3C92 ≥370 ≤ 1.2 ≤ 7.0 − E+E43-3C93 ≥320 ≤ 1.4(1) ≤ 8.0(1) − E+PLT43-3C93 ≥320 ≤ 1.2(1) ≤ 7.0(1) − E+E43-3C94 ≥320 ≤ 1.4 ≤ 8.0 − E+PLT43-3C94 ≥320 ≤ 1.2 ≤ 7.0 − E+E43-3F3 ≥300 ≤ 1.8 − ≤ 2.7 E+PLT43-3F3 ≥300 ≤ 1.5 − ≤ 2.25 E+E43-3F4 ≥250 − − − E+PLT43-3F4 ≥250 − − − GRADE 1. Measured at 140 °C. Properties of core sets under power conditions (continued) B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 500 kHz; B̂ = 50 mT; T = 100 °C f = 500 kHz; B̂ = 100 mT; T = 100 °C f = 1 MHz; ˆ = 30 mT; B T = 100 °C f = 3 MHz; ˆ = 10 mT; B T = 100 °C E+E43-3C90 ≥320 − − − − E+PLT43-3C90 ≥320 − − − − E+E43-3C92 ≥370 − − − − E+PLT43-3C92 ≥370 − − − − E+E43-3C93 ≥320 − − − − E+PLT43-3C93 ≥320 − − − − E+E43-3C94 ≥320 − − − − E+PLT43-3C94 ≥320 − − − − E+E43-3F3 ≥300 − − − − E+PLT43-3F3 ≥300 − − − − E+E43-3F4 ≥250 − − ≤ 4.2 ≤ 6.5 E+PLT43-3F4 ≥250 − − ≤ 3.5 ≤ 5.5 GRADE 2004 Sep 01 5 Ferroxcube Planar E cores and accessories E43/10/28 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2004 Sep 01 6