EPCOS B41790A5298Q000 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41690, B41790
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41690, B41790
Ultra compact up to 140 °C
Applications
Ultra compact design for automotive applications up to 140 °C
Features
Up to 150 °C operating temperature at reduced voltage
applied
Long useful life, 2000 h at up to 140 °C
Very high ripple current capability
Ultra compact design
High vibration resistance
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B41690, B41790
Ultra compact up to 140 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
25 ... 63 V DC
1.3 VR (for VR ≤ 40 V DC)
1.15 VR (for VR = 63 V DC)
300 ... 10000 µF
10/+30% Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
Terminals
Length l (mm)
Approx. ESL (nH)
axial
25
18
20/21
22
26
30
21
24
29
34
39
33
38
45
50
25
6
7
30
6
7
8
10
39
9
11
13
14
49
Useful life
140 °C; VR; 0.6 IAC,R
125 °C; VR; IAC, R
85 °C; VR; IAC, max
40 °C; VR; 2 IAC, R
Voltage endurance test
125 °C; VR
16
29
49
soldering star
14
38
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak
≤ initial specified limit
> 2000 h
> 5000 h
> 15000 h
> 500000 h
Post test requirements:
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% initial specified limit
Ileak
≤ initial specified limit
2000 h
Vibration resistance test
To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, at 10 Hz ... 2 kHz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B41690, B41790
Ultra compact up to 140 °C
Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 25
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
dmax × Imax
mm
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 25.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Approx. weight
g
5.1
5.7
6.8
7.4
8.9
11.7
11.1
14.7
13.5
20.0
25.0
Page 4 of 17
Packing units (pcs.)
Pallet
Reel
288
450
200
350
200
350
180
250
180
250
180
160
160
140
140
110
B41690, B41790
Ultra compact up to 140 °C
Soldering star capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 25
16 × 30
16 × 39
18 × 30
18 × 39
21 × 39
21 × 49
dmax × Imax
mm
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 27
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
Please read Cautions and warnings and
Important notes at the end of this document.
c ±0.1
mm
12.5
14.5
14.5
16.5
16.5
16.5
18.5
18.5
21.5
21.5
e ±0.1
mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
Page 5 of 17
Approx. weight
g
5.4
6.1
7.2
7.9
9.4
12.2
11.8
15.4
21.0
26.0
Packing units
pcs.
480
480
480
300
300
200
300
200
324
264
B41690, B41790
Ultra compact up to 140 °C
Overview of available types
VR (V DC)
25
35
40
63
Case dimensions d × l (mm)
CR (µF)
300
12 × 30
470
14 × 30
12 × 30
600
16 × 30
680
1000
1200
14 × 25
14 × 30
16 × 25
16 × 30
18 × 39
1300
1400
18 × 30
1800
16 × 30
1900
2000
14 × 30
21 × 39
20 × 29
2300
18 × 30
2500
21 × 49
18 × 39
2700
2900
16 × 30
20 × 29
3000
18 × 39
3800
3900
18 × 30
4300
16 × 39
5000
20 × 29
21 × 39
21 × 39
5200
5800
16 × 39
12 × 30
21 × 49
18 × 39
21 × 49
7000
8000
21 × 39
10000
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B41690, B41790
Ultra compact up to 140 °C
Case dimensions and ordering codes
VR
V DC
25
35
40
63
CR
100 Hz
20 °C
µF
1200
2000
2900
3900
4300
5000
5800
8000
10000
1000
1400
1900
2500
3000
3800
5200
7000
600
1000
1400
1800
2300
2700
3900
5200
300
470
680
1000
1300
2000
2500
Case
dimensions
d×l
mm
12 × 30
14 × 30
16 × 30
18 × 30
16 × 39
20 × 29
18 × 39
21 × 39
21 × 49
14 × 25
16 × 25
16 × 30
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 39
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code
Axial pallet
Ordering code
Axial reel
Ordering code
Soldering star
B41690A5128Q007
B41690A5208Q007
B41690A5298Q007
B41690A5398Q007
B41690A5438Q007
B41690A5508Q007
B41690A5588Q007
B41690A5808Q007
B41690A5109Q007
B41690A7108Q007
B41690A7148Q007
B41690A7198Q007
B41690A7258Q007
B41690A7308Q007
B41690A7388Q007
B41690A7528Q007
B41690A7708Q007
B41690A7607Q007
B41690B7108Q007
B41690B7148Q007
B41690A7188Q007
B41690A7238Q007
B41690A7278Q007
B41690A7398Q007
B41690B7528Q007
B41690A8307Q007
B41690A8477Q007
B41690A8687Q007
B41690A8108Q007
B41690A8138Q007
B41690A8208Q007
B41690A8258Q007
B41690A5128Q009 B41790A5128Q000
B41690A5208Q009 B41790A5208Q000
B41690A5298Q009 B41790A5298Q000
B41790A5398Q000
B41690A5438Q009 B41790A5438Q000
B41790A5588Q000
B41790A5808Q000
B41790A5109Q000
B41690A7108Q009 B41790A7108Q000
B41690A7148Q009 B41790A7148Q000
B41690A7198Q009 B41790A7198Q000
B41790A7258Q000
B41790A7388Q000
B41790A7528Q000
B41790A7708Q000
B41690A7607Q009 B41790A7607Q000
B41690B7108Q009 B41790B7108Q000
B41690B7148Q009 B41790B7148Q000
B41790A7188Q000
B41690A8307Q009
B41690A8477Q009
B41690A8687Q009
B41690A8108Q009
Page 7 of 17
B41790A7278Q000
B41790A7398Q000
B41790B7528Q000
B41790A8307Q000
B41790A8477Q000
B41790A8687Q000
B41790A8108Q000
B41790A8138Q000
B41790A8208Q000
B41790A8258Q000
B41690, B41790
Ultra compact up to 140 °C
Technical data
CR
100 Hz
20 °C
µF
ESRtyp
100 Hz
20 °C
mΩ
VR = 25 V DC
1200
80
2000
50
2900
35
3900
27
4300
23
5000
23
5800
18
8000
15
10000
12
VR = 35 V DC
1000
75
1400
60
1900
38
2500
32
3000
27
3800
21
5200
16
7000
13
VR = 40 V DC
600 100
1000
65
1400
45
1800
35
2300
30
2700
25
3900
18
5200
14
VR = 63 V DC
300 160
470 105
680
80
1000
50
1300
40
2000
27
2500
22
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
IAC,max
10 kHz
85 °C
A
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
140 °C
A
135
90
60
45
40
37
30
25
20
1200
750
550
390
360
320
280
200
160
90
60
40
31
27
27
22
18
14
86
57
38
30
26
26
21
17
14
5.7
6.8
9.7
11.0
13.4
11.6
15.0
16.6
20.7
4.9
5.8
8.4
9.4
11.6
10.0
12.9
14.2
17.7
3.6
4.3
6.2
7.0
8.6
7.4
9.5
10.5
13.2
2.5
3.0
4.3
4.8
5.9
5.1
6.6
7.3
9.1
1.6
1.9
2.8
3.1
3.5
3.3
4.3
4.8
5.9
125
100
65
50
45
35
27
21
1050
750
550
430
360
260
190
150
80
65
40
32
28
22
18
14
75
60
37
30
27
20
17
13
5.5
5.9
9.5
11.0
11.6
14.8
16.4
20.7
4.7
5.0
8.2
9.4
10.0
12.7
14.0
17.7
3.5
3.7
6.1
7.0
7.4
9.4
10.4
13.2
2.4
2.6
4.2
4.8
5.1
6.5
7.2
9.1
1.5
1.7
2.7
3.1
3.3
4.2
4.7
5.9
165
105
70
58
48
40
30
23
1200
750
550
400
320
260
180
150
90
60
40
33
28
22
18
14
85
57
38
31
26
21
17
13
5.7
6.8
9.6
10.9
11.6
14.8
16.4
20.7
4.9
5.8
8.2
9.4
10.0
12.7
14.0
17.7
3.6
4.3
6.1
6.9
7.4
9.4
10.4
13.2
2.5
3.0
4.2
4.8
5.1
6.5
7.2
9.1
1.6
1.9
2.7
3.1
3.3
4.2
4.7
5.9
260
175
130
80
64
44
35
2500
1600
1100
750
580
370
300
120
83
65
38
30
23
18
115
80
62
36
28
22
17
5.0
6.1
7.1
11.6
13.2
15.4
19.3
4.3
5.3
6.0
10.0
11.4
13.2
16.5
3.2
3.9
4.4
7.4
8.5
9.8
12.3
2.2
2.7
3.1
5.1
5.8
6.8
8.5
1.4
1.7
2.0
3.3
3.4
4.4
5.5
Please read Cautions and warnings and
Important notes at the end of this document.
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
Page 8 of 17
B41690, B41790
Ultra compact up to 140 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at VR1)
Useful life
depending on case temperature TC under ripple current operating conditions at VR1)
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
B41690, B41790
Ultra compact up to 140 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at Vop2)
VR = 25 V: Vop ≤ 20 V; VR = 35 V: Vop ≤ 30 V;
VR = 40 V: Vop ≤ 35 V; VR = 63 V: Vop ≤ 55 V
Useful life
depending on case temperature TC under ripple current operating conditions at Vop2)
VR = 25 V: Vop ≤ 20 V; VR = 35 V: Vop ≤ 30 V;
VR = 40 V: Vop ≤ 35 V; VR = 63 V: Vop ≤ 55 V
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
B41690, B41790
Ultra compact up to 140 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Typical behavior for 1000 µF/40 V
Impedance Z
versus frequency f
Typical behavior for 1000 µF/40 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
B41690, B41790
Ultra compact up to 140 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B41690, B41790
Ultra compact up to 140 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B41690, B41790
Ultra compact up to 140 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
Chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
Reference
Chapter "Capacitors
with screw terminals"
"Screw terminals accessories"
B41690, B41790
Ultra compact up to 140 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Rated ripple current for base cooling
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,rms
IAC,f
IAC,max
IAC,R
IAC,R (B)
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Becherbodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 15 of 17
B41690, B41790
Ultra compact up to 140 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 17 of 17
Similar pages