A2 RoHS Compliant 26.0 x 26.0 x 24.5 (39.5) mm Features • • • • • Large switching capacity up to 40A Small size and light weight PCB pin and quick connect mounting available Suitable for automobile and lamp accessories QS-9000, ISO-9002 Certified Manufacturing Contact Data Dimensions shown in mm. Dimensions are shown for reference purposes only. Specifications and availability subject to change without notice. Contact Arrangement Contact Rating 1A = SPST N.O. Contact Resistance < 30 milliohms initial 1B = SPST N.C. Contact Material AgSnO2 1C = SPDT Maximum Switching Power 630W 1U = SPST N.O. (2 terminals) Maximum Switching Voltage 75VDC 1A : 40A @ 14VDC Maximum Switching Current 40A 1B : 30A @ 14VDC 1C : 40A @ 14VDC N.O. and 1C : 30A @ 14VDCN.C. 1U : 2x20A @ 14VDC Coil Data Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) Rated Max 1.6W 1.9W 70% of rated voltage 10% of rated voltage 6 7.8 22.5 19 4.20 .6 12 15.6 90 75.8 8.40 1.2 24 31.2 360 303.2 16.80 2.4 Coil Power W Operate Time ms Release Time ms 1.60 or 1.90 7 5 General Data Electrical Life @ rated load 100K cycles, typical Mechanical Life 10M cycles, typical Insulation Resistance 100M Ω min. @ 500VDC Dielectric Strength, Coil to Contact 750V rms min. @ sea level Contact to Contact 500V rms min. @ sea level Shock Resistance 147m/s2 for 11 ms Vibration Resistance 1.5mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 8N (quick connect), 4N (PCB pins) Operating Temperature -40oC to +125oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 31g Caution 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. page 77 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 A2 Ordering Information 1. Series A2 1C S Q 12VDC 1.6 A2 standard A2F with mounting flange A2M with metal bracket A2S with metal bracket and shroud 2. Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 1U = SPST N.O. (2 terminals) 4. Termination P = PCB Pins *not available with A2S Q = Quick Connect 5. Coil Voltage 6VDC 12VDC 24VDC 6. Coil Power 1.6 = 1.6W 1.9 = 1.9W 7. Coil Suppression Blank = Standard D = Diode (1N4005) Cathode on “86” terminal D1 = Diode (1N4004) Cathode on “86” terminal R = Resistor (180Ω for 6VDC; 680Ω for 12VDC; 2700Ω for 24VDC) 2D = 2 Diodes (1N4005) DR = Diode & Resistor Cathode on “86” terminal (1N4005 & 180Ω for 6VDC; 680Ω for 12VDC; 2700Ω for 24VDC) ** Consult factory if other values are needed Dimensions Dimensions shown in mm. Dimensions are shown for reference purposes only. 3. Sealing Option S = Sealed C = Dust Cover *not available with A2S Units = mm page 78 www.citrelay.com phone - 763.535.2339 A2 with Quick Connects fax - 763.535.2194 Specifications and availability subject to change without notice. A2 with PC Pins A2 Dimensions Dimensions shown in mm. Dimensions are shown for reference purposes only. Specifications and availability subject to change without notice. Units = mm A2F with Quick Connect A2M with Quick Connects A2S with Quick Connects Schematics, PC Pin Dimenstions & PC Layouts Bottom Views 1A 1B 1C 1U page 79 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194