A P V- 2 5 25W Single Output Switching Power Supply series ■ Features : Constant voltage mode power supply Universal AC input / Full range Withstand 300VAC Surge input for 5 seconds Protections: Short circuit / Over load / Over voltage Fully isolated plastic case Cooling by free air convection Small and compact size IP42 design Class 2 power unit Pass LPS 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications 2 years warranty IP42 LPS SPECIFICATION APV-25-5 APV-25-12 APV-25-15 APV-25-24 APV-25-36 DC VOLTAGE 5V 12V 15V 24V 36V RATED CURRENT 3.5A 2.1A 1.68A 1.05A 0.7A CURRENT RANGE 0 ~ 3.5A 0 ~ 2.1A 0 ~ 1.68A 0 ~ 1.05A 0 ~ 0.7A RATED POWER 17.5W 25.2W 25.2W 25.2W 25.2W 150mVp-p 150mVp-p 150mVp-p 150mVp-p 83% 84% MODEL OUTPUT RIPPLE & NOISE (max.) Note.2 120mVp-p VOLTAGE TOLERANCE Note.3 ±5.0% ±1.0% LINE REGULATION ±2.0% LOAD REGULATION SETUP, RISE TIME Note.6 1500ms, 30ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT 20ms/230VAC Note.4 90 ~ 264VAC 47 ~ 63Hz EFFICIENCY (Typ.) 75.5% AC CURRENT INRUSH CURRENT(Typ.) 0.4A/230VAC 0.8A/115VAC COLD START 45A(twidth=310μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 9 units (circuit breaker of type B) / 15 units (circuit breaker of type C) at 230VAC 0.25mA / 240VAC OVER LOAD Above 105% rated output power WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16.2V 27 ~ 32.4V 17.25 ~ 21V 5.75 ~ 6.95V -30 ~ 70℃(Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH SAFETY STANDARDS UL8750 , CSA-C22.2 No. 250.0-13, IP42 approved; design refer to EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH ISOLATION RESISTANCE EMC EMISSION DIMENSION 41.4 ~ 48.6V Protection type : Shut down o/p voltage, re-power on to recover ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes PACKING NOTE 83% VIBRATION EMC IMMUNITY MTBF OTHERS 82% LEAKAGE CURRENT OVER VOLTAGE EMC 127 ~ 370VDC FREQUENCY RANGE PROTECTION SAFETY & 1500ms,30ms / 115VAC at full load 12ms/115VAC at full load Compliance to EN55022,EN61000-3-2 Class A,EN61000-3-3 Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A 692.8K hrs min. MIL-HDBK-217F (25℃) 84*57*29.5mm (L*W*H) 0.13Kg; 72pcs / 10.4Kg / 0.92CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7.The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. File Name:APV-25-SPEC 2016-11-10 A P V- 2 5 25W Single Output Switching Power Supply series Mechanical Specification Case No.PCD16A 3 Unit:mm 84 150±10 15.3 UL1569 18AWG 57 7.3 150±10 7.3 UL1569 18AWG AC/N(Blue) 3.6 2 -ψ -ψ8 .9 2 5 15.3 T case 5 AC/L(Brown) V-(BLACK) V+(RED) 3 1.9 29.5 ※ T case: Max. Case Temperature. Block Diagram I/P fosc : 60KHz EMI FILTER POWER SWITCHING RECTIFIERS RECTIFIERS & FILTER +V -V DETECTION CIRCUIT PWM CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 90 100 200 210 220 230 240 250 264 INPUT VOLTAGE (VAC) 60Hz File Name:APV-25-SPEC 2016-11-10