T-1(3mm) BI-COLOR INDICATOR LAMPS L-115VEGW HIGH EFFICIENCY RED / GREEN L-115VEYW HIGH EFFICIENCY RED / YELLOW L-115VGYW GREEN / YELLOW Features ! UNIFORM ! LOW LIGHT OUTPUT. The High Efficiency Red source color devices are made POWER CONSUMPTION. ! MILKY !3 Description with Gallium Arsenide Phosphide on Gallium Phosphide WHITE DIFFUSION LENS. Orange Light Emitting Diode. LEADS WITH ONE COMMON LEAD. ! THIRD COLOR (MIXED COLOR) AVAILABLE. ! SUPER ! I.C. BRIGHT VERSION AVAILABLE. COMPATIBLE. ! LONG The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light LIFE - SOLID STATE RELIABILITY. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0318 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/18/2001 DRAWN: J.X.FU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e HIGH EFFICIENCY RED (GaAsP/GaP) L-115VEGW GREEN (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) L-115VEYW YELLOW (GaAsP/GaP) GREEN (GaP) L-115VGYW Iv (m c d ) @ 20 m A L en s Ty p e WHITE DIFFUSED WHITE DIFFUSED WHITE DIFFUSED YELLOW (GaAsP/GaP) V i ew i n g An g l e Min . Ty p . 12 50 12 40 12 50 8 15 12 30 8 15 2θ1/2 60° 60° 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength High Efficiency Red Green Yellow λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 627 565 590 nm IF=20mA High Efficiency Red Green Yellow 625 568 588 nm IF=20mA High Efficiency Red Spectral Line Halfwidth Green Yellow 45 30 35 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance High Efficiency Red Green Yellow 15 15 20 VF Forward Voltage High Efficiency Red Green Yellow 2.0 2.2 2.1 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C Par am et er H i g h E f f i c i e n c y R ed Gr een Yello w Un it s Power dissipation 105 105 105 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 160 140 140 mA 5 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: KDA0318 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/18/2001 DRAWN: J.X.FU PAGE: 2 OF 4 High Efficiency Red / Green L-115VEGW SPEC NO: KDA0318 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/18/2001 DRAWN: J.X.FU PAGE: 3 OF 4 High Efficiency Red / Yellow L-115VEYW Green / Yellow L-115VGYW SPEC NO: KDA0318 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/18/2001 DRAWN: J.X.FU PAGE: 4 OF 4