AZETTLER AZ697-1C-48D 10 amp miniature power relay Datasheet

AZ697
10 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
Low cost
Epoxy sealed version available
10 Amp switching — single pole contacts
UL TV-5
Isolation spacing greater than 8mm
UL Class B insulation system, Class F available
UL, CUR file E44211; TÜV file R50129288
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 10 A
Max. switched voltage: 150* VDC or 380 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
TÜV
TV-5 at 120 VAC [1][2][3]
10 A at 277 VAC, General Use [1]
10 A 30 VDC, Resistive [1]
1/3 HP at 250 VAC [1]
1/4 HP at 125 VAC N.O. [1]
10 A at 277 VAC, General Use, 100k cycles [2][3]
10 A at 30 VDC, Resistive, 100k cycles [2][3]
1/3 HP at 250 VAC, 100k cycles [2][3]
1/4 HP at 125 VAC, 100k cycles [2][3]
10 A at 250 VAC, 30 VDC Resistive 100k cycles
[1][2]
10 A at 250 VAC, 30 VDC Resistive 50k cycles [3]
Material
Silver cadmium oxide [1], silver nickel [2], silver tin
oxide [3], Gold plating available
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 10 A 240 VAC Res.
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 90°C (194°F) Class B
-40°C (-40°F) to 110°C (230°F) Class F
-40°C (-40°F) to 130°C (266°F) Class B
-40°C (-40°F) to 155°C (311°F) Class F
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
At Pickup Voltage
(typical)
257 mW
Max. Immersion Time
30 seconds
Max. Continuous
Dissipation
Temperature Rise
1.9 W at 20°C (68°F) ambient (Class B)
2.5 W at 20°C (68°F) ambient (Class F)
Weight
18 grams
Temperature
Max. 130°C (266°F) Class B
Max. 155° C (311° F) Class F
Power
34° C (61°F) at nominal voltage
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4/9/09W
AZ697
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
3
5
6
9
12
18
24
48
60
110
2.1
3.5
4.2
6.3
8.4
12.6
16.8
33.6
42.0
79.3
5.7
9.4
11.4
17.4
22.8
27.9
45.7
89.0
115.3
170.5
ORDER NUMBER*
Coil
Resistance
17
47
68
160
275
650
1100
4170
7000
22900
Form A
(SPST)
±10%
±10%
±10%
±10%
±10%
±10%
±15%
±15%
±15%
±15%
Form C
(SPDT)
AZ697–1A–3D
AZ697–1A–5D
AZ697–1A–6D
AZ697–1A–9D
AZ697–1A–12D
AZ697–1A–18D
AZ697–1A–24D
AZ697–1A–48D
AZ697–1A–60D
AZ697–1A–110D
AZ697–1C–3D
AZ697–1C–5D
AZ697–1C–6D
AZ697–1C–9D
AZ697–1C–12D
AZ697–1C–18D
AZ697–1C–24D
AZ697–1C–48D
AZ697–1C–60D
AZ697–1C–110D
*For silver nickel contacts change “-1A” or “-1C” to “-1AB” or “-1CB”. For silver tin oxide contacts change “-1A” or “-1C” to “-1AE” or “-1CE”. For epoxy seal
change “D” to “DE”. For gold plating change “D” or “DE” to “DA” or “DEA”. For Class F insulation add suffix “F” to part number.
HARDWARE ORDERING DATA
DESCRIPTION
ORDER NUMBER
DESCRIPTION
ORDER NUMBER
Socket
ST482–U1
Retainer
ST482–2
MECHANICAL DATA
PC BOARD LAYOUT
Form A and C
.51
(13)
.138 .138
.649 (3.5) (3.5)
(16.5)
.015
(0.38)
1.02
(25.9)
.160 ± .015
(4.2 ± .4)
1.14
(29)
Viewed toward terminals
.295 (7.5)
.08
(2.1)
.05 DIA. (1.3)
(Form C only)
(4 places Form A)
(5 places Form C)
Terminal No. Dimensions Tol.: ± 0.005 (0.13)
1,2,3,5
0.018 (0.457) x 0.038 (0.965)
4
0.011 (0.279) x 0.038 (0.965)
WIRING DIAGRAM
Form A
5
3
4
1
5
.500
(12.7)
1.22
(30.9)
Form C
1
HARDWARE
ST482-U1
2
3
1.28
(32.5)
.366
(9.3)
.414
(10.5)
.125 DIA
(3.2)
.295
(7.5)
4
Viewed toward terminals
.354
(9.0)
.177
MAX.
(4.5)
1.217
(30.9)
.158
(4.0)
.276
(7.0)
1.004
(26.5)
.792
(20.1)
.059 DIA
(1.5)
.118
(3.0)
RETAINING
CLIP
.138
(3.5)
ST482-2
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
4/9/0 W
Similar pages