3.2x2.4mm SMD CHIP LED LAMP Part Number: APD3224YC-F01 Yellow Features Description z 3.2x2.4mm SMT LED, 2.4mm THICKNESS. The Yellow source color devices are made with Gallium z LOW POWER CONSUMPTION. Arsenide Phosphide on Gallium Phosphide Yellow Light z IDEAL FOR BACKLIGHT AND INDICATOR. Emitting Diode. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 1500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1090 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203001092 Selection Guide Part No. Dice APD3224YC-F01 Lens Type Yellow (GaAsP/GaP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 10 40 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1090 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203001092 Yellow APD3224YC-F01 SPEC NO: DSAF1090 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203001092 APD3224YC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1090 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203001092 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1090 REV NO: V.4 APPROVED: WYNEC CHECKED: Allen Liu APD3224YC-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203001092