Filtronic LP6836P100 Packaged 0.25W Power PHEMT Solid State FEATURES • • • • • GATE +24.5 dBm Typical Power at 15 GHz 12 dB Typical Power Gain at 15 GHz Low Intermodulation Distortion 55% Power-Added-Efficiency Color-coded by IDSS range SOURCE DRAIN DESCRIPTION AND APPLICATIONS The LP6836P100 is a packaged Aluminum Gallium Arsenide / Indium Gallium Arsenide (AlGaAs/InGaAs) Pseudomorphic High Electron Mobility Transistor (PHEMT), utilizing an Electron-Beam direct-write 0.25 µm by 360 µm Schottky barrier gate. The recessed “mushroom” gate structure minimizes parasitic gate-source and gate resistances. The epitaxial structure and processing have been optimized for reliable high-power applications. The LP6836 also features Si3N4 passivation and is available in die form, or P70 packages. Packages are color-coded by IDSS range. Typical applications include commercial and military high-performance power amplifiers, including SATCOM uplink transmitters, and medium-haul digital radio transmitters. The LP6836P100 may be procured in a variety of grades, depending upon specific user requirements. Standard lot screening is patterned after MIL-STD-19500, JANC grade. Space level screening to FSS JANS grade is also available. PERFORMANCE SPECIFICATIONS (TA = 25°C) SYMBOLS IDSS P1dB G1dB ηADD IMAX GM VP IGSO BVGS BVGD PARAMETERS Saturated Drain-Source Current VDS = 2V VGS = 0V LP6836-P100-1 Blue LP6836-P100-2 Green LP6836-P100-3 Red Output Power at 1dB Gain Compression f = 15 GHz VDS = 8.0V, IDS = 50% IDSS Power Gain at 1dB Gain Compression f = 15 GHz VDS = 8.0V, IDS = 50% IDSS Power-Added Efficiency Maximum Drain-Source Current VDS = 2V VGS = +1V Transconductance VDS = 2V VGS = 0V Pinch-Off Voltage VDS = 2V IDS = 2mA Gate-Source Leakage Current VGS = -5V Gate-Source Breakdown Voltage IGS = 2mA Gate-Drain Breakdown Voltage IGD = 2mA MIN 80 96 106 TYP 90 100 115 23.5 24.5 dBm 8.5 9.5 55 190 95 -0.8 1 -15 -16 dB % mA mS V 70 -0.25 -11 -12 MAX 95 105 125 -1.5 15 UNITS mA µA V V Get Package Model DSS-031 WF Phone: (408) 988-1845 Internet: http://www.filtronicsolidstate.com Fax: (408) 970-9950 Filtronic LP6836P100 Packaged 0.25W Power PHEMT Solid State ABSOLUTE MAXIMUM RATINGS (25°C) 1 SYMBOL PARAMETER RATING VDS Drain-Source Voltage 10V VGS Gate-Source Voltage -4V IDS Drain-Source Current 2 x IDSS IG Gate Current 18 mA PIN RF Input Power 180 mW TCH Channel Temperature 175°C TSTG Storage Temperature -65/175°C 3,4 PT Power Dissipation 1.3W RECOMMENDED CONTINUOUS OPERATING LIMITS 2 SYMBOL PARAMETER RATING VDS Drain-Source Voltage 8V VGS Gate-Source Voltage -0.8V IDS Drain-Source Current 0.85 x IDSS IG Gate Current 3 mA PIN RF Input Power 90 mW TCH Channel Temperature 150°C TSTG Storage Temperature -20/50°C 3,4 PT Power Dissipation 1.1 W GXdB Gain Compression 8 dB NOTES: 1. Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device. 2. Recommended Continuous Operating Limits should be observed for reliable device operation. 3. Power Dissipation defined as: PT ≡ (PDC + PIN) - POUT, where: PDC = DC bias power, POUT = RF output power, and PIN = RF input power. 4. Power Dissipation to be de-rated as follows above 25°C: Absolute Maximum: PT = 1.3W - (9mW/°C) x THS Recommended Continuous Operating: PT = 1.1W - (9mW/°C) x THS where THS = heatsink or ambient temperature. 5. Specifications subject to change without notice. HANDLING PRECAUTIONS: Care should be exercised during handling to avoid damage to the devices. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 1A (0-500V), and further information on ESD control measures can be found in MIL-STD-1686 and MILHDBK-263. APPLICATIONS NOTES AND DESIGN DATA: Applications Notes are available from your local FSS Sales Representative, or directly from the factory. Complete design data, including S-parameters, Noise data, and Large-Signal models, is available on 3.5” diskette, or may be down-loaded from our Web Page. PACKAGE OUTLINE (DIMENSIONS IN INCHES) 0.256 0.062 0.098 0.065 0.098 0.020 0 0.024 0.240 0.035 0.335 Get Package Model DSS-031 WF Phone: (408) 988-1845 Internet: http://www.filtronicsolidstate.com Fax: (408) 970-9950