Flexible LED Light Strip 30 LEDs per strip OVQ12S30x7 1 strip Length: 19.7 inches Contains 30 LEDs Product Photo Here Unit Price = 1 strip UL FILE E339817 This LED Light Strip is a flexible and scalable lighting solution using high brightness LEDs to supply illumination for residential, commercial, and industrial applications. Up to 16 feet (5 meters) can be operated with a single 12V power supply. Dual-sided tape provides easy installation in most indoor applications and allows many different configurations. Applications • Commercial and residential decoration • Under-counter lighting • Media illumination • Large area backlighting • • • Part Number Color Material OVQ12S30B7 OVQ12S30G7 OVQ12S30R7 OVQ12S30W7 OVQ12S30WW7 OVQ12S30Y7 Blue Green Red White Warm White Yellow InGaN InGaN AllnGaP InGaN InGaN AllnGaP Small to medium channel letters Point-of-sale displays Neon replacement Dominant Wavelength λD (nm) or CCT (K) Typical 470nm 525nm 625nm 5500°K 3300°K 590nm Typical Illumination (lux @ 0.5m) 20 50 32 68 60 32 Notes: RoHS • • • • • All dimensions are in inches [millimeters]. Each strip begins with solder pads for wire connection. 12-volt, 20 Watt power supply is sufficient for up to 300 LEDs (1 reel). For smaller applications, the strip can be cut at the end of any 1.97” section. To add solder bumps to the cut sections, the X-Acto® #16 scoring blade works very well to expose the copper contacts. Caution should be exercised so as not to remove the copper coating. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 08/2012 Page 1 of 3 Flexible LED Light Strip OVQ12S30x7 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +80° C Operating Temperature Range -30 ~ +50° C Mounting Surface Temperature 60° C Input Voltage (DC) 12 V Power Dissipation Red / Yellow 2.7 W Green / Blue White/ Warm White 2.3 W LED Junction Temperature 125° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Flammability Rating of the Flex Circuit Typical Specification V0 (TA = 25o C unless otherwise noted) Input Voltage (DC)* 12 V Power Consumption Red / Yellow 1.9 W Green / Blue White/ Warm White 1.6 W Beam Angle 120° Net Weight 5g * Exceeding the typical input voltage can damage the LEDs and reduce the operating life of the product. Product Circuit LED R1 LED LED LED R6 LED LED LED R2 LED LED LED R7 LED LED LED R3 LED LED LED R8 LED LED LED R4 LED LED LED R9 LED LED LED R5 LED LED LED R10 LED LED +12VDC GND OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 08/2012 Page 2 of 3 Flexible LED Light Strip OVQ12S30x7 Packaging: 7” reel / 10 strips per reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 08/2012 Page 3 of 3