SunLED DUR25C-1 26mm (1.02 ") single digit numeric display Datasheet

Part Number:
www.SunLED.com
DUR25C-1
26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY
Features
● 1.02 INCH DIGIT HEIGHT.
●LOW CURRENT OPERATION.
●EXCELLENT CHARACTER APPEARANCE.
●HIGH LIGHT OUTPUT.
●EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
●I.C. COMPATIBLE.
●MECHANICALLY RUGGED.
●STANARD : GRAY FACE, WHITE SEGMENT.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
Operating Characteristics
(TA=25°C)
3.Specifications are subject to change without notice
Absolute Maximum Ratings
(TA=25°C)
Reverse Voltage
Per Segment or (DP)
VR
Forward Current
Per Segment or (DP)
IF
Unit
Forward Voltage (Typ.)
Per Segment Or ( DP)
(IF=10mA)
VF
3.8
(1.9)
V
10(5)
V
Forward Voltage (Max.)
Per Segment Or ( DP)
(IF=10mA)
VF
5.0
(2.5)
V
Reverse Current (Max.)
Per Segment Or (DP)
(VR=10(5)V)
IR
10
(10)
uA
Wavelength Of Peak
Emission (Typ.)
(IF=10mA)
λP
627
nm
Wavelength Of Dominant
Emission (Typ.)
(IF=10mA)
λD
625
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
45
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
pF
30(30)
iFS
Power Dissipation
Per Segment or (DP)
PT
150(75)
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Lead Solder Temperature
[2mm Below Package Base]
Published Date : MAR 13,2008
Unit
UR
(GaAsP/GaP)
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
Per Segment or (DP)
Storage Temperature
UR
(GaAsP/GaP)
160(160)
mA
mA
mW
°C
260°C For 3~5 Seconds
Drawing No : SDSA2131
V3
Checked : Shin Chi
P.1/5
Part Number:
www.SunLED.com
Part
Number
DUR25C-1
Emitting
Color
Red
DUR25C-1
26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY
Emitting
Material
GaAsP/GaP
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
3000
15990
Wavelength
nm
λP
Description
627
Common Cathode, Rt. Hand Decimal
™ UR
Published Date : MAR 13,2008
Drawing No : SDSA2131
V3
Checked : Shin Chi
P.2/5
Part Number:
www.SunLED.com
Published Date : MAR 13,2008
DUR25C-1
26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY
Drawing No : SDSA2131
V3
Checked : Shin Chi
P.3/5
Part Number:
www.SunLED.com
DUR25C-1
26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 13,2008
Drawing No : SDSA2131
V3
Checked : Shin Chi
P.4/5
Part Number:
www.SunLED.com
26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 13,2008
DUR25C-1
Drawing No : SDSA2131
DUR25C-1
V3
Checked : Shin Chi
P.5/5
Similar pages