Power Inductors <SMD Type: CDPH Series> Type: CDPH36D13F ◆ Product Description ・4.0×3.8mm Max.(L×W),1.4mm Max. Height. ・Inductance range: 0.68～12μH. ・Rated current range:0.66～3.0A. ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・Flat wire used. ・Ideally used in Mobile phone,PDA,MP3,DSC/DVC etc as DC-DC Converter inductors. ・RoHS Compliance. ◆ Dimensions (mm) 1.4 Max. 1.2 2.6 3.8 0.2 3.6 0.2 * Dimensions without tolerance are approx. ◆ Land Pattern (mm) 4.0 2.2 ◆ CONNECTION (BOTTOM VIEW) 1.2 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDPH Series> Type: CDPH36D13F ◆ Specification Stamp Inductance (μH) 100kHz/1.0V CDPH36D13FNP-0R68PC A CDPH36D13FNP-1R0PC Saturation current (A)※1 Temperature rise current (A)※2 0.68±25% D.C.R.(mΩ) Max.(Typ.) (at 20℃) 40(32) 3.92(4.90) 3.00(3.40) B 1.0±25% 49(39) 3.20(4.00) 2.46(2.80) CDPH36D13FNP-1R2PC C 1.2±25% 56(45) 3.12(3.90) 2.35(2.67) CDPH36D13FNP-1R5PC D 1.5±25% 64(51) 2.64(3.30) 2.30(2.60) CDPH36D13FNP-2R0MC E 2.0±20% 71(57) 2.62(3.28) 2.19(2.46) CDPH36D13FNP-2R2MC F 2.2±20% 80(64) 2.49(3.11) 2.02(2.30) CDPH36D13FNP-2R7MC G 2.7±20% 110(86) 2.06(2.58) 1.66(1.98) CDPH36D13FNP-3R3MC H 3.3±20% 119(95) 1.96(2.45) 1.55(1.76) CDPH36D13FNP-3R9MC I 3.9±20% 175(137) 1.85(2.31) 1.27(1.44) CDPH36D13FNP-4R7MC J 4.7±20% 186(149) 1.60(2.00) 1.24(1.41) CDPH36D13FNP-6R3MC K 6.3±20% 261(209) 1.50(1.88) 1.00(1.15) CDPH36D13FNP-7R2MC L 7.2±20% 278(222) 1.26(1.57) 0.96(1.09) CDPH36D13FNP-8R2MC M 8.2±20% 399(319) 1.17(1.46) 0.81(0.91) CDPH36D13FNP-100MC N 10.0±20% 525(420) 1.05(1.31) 0.70(0.80) CDPH36D13FNP-120MC O 12.0±20% 555(444) 1.02(1.28) 0.66(0.76) Part Name ※ ※ Description of part name CDPH36D13FNP-1R0P□ B Box C Carrier Tape ※1.Saturation current: The DC current at which the inductance decreases to 70% of its nominal value. (Ta＝20℃) ※2.Temperature rise current: The DC current at which the temperature rise is △t＝40℃ (Ta＝20℃) . ※ This spec is not the final revision, and some parts may be changed before production. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2