Keysight E6569F Umts/lte/lte-a wireless test manager Datasheet

Keysight E6568F
UMTS/LTE/LTE-A
Wireless Test Manager
Technical Overview
02 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
Powerful, easy-to-use test automation software that helps you
accelerate the design and manufacturing and quickly achieve
volume production of multi-format W-CDMA/GSM/GPRS/EGPRS
and LTE FDD/TDD wireless devices
Tests Supported
LTE/LTE-A transmitter tests
–– Minimum output power
–– Maximum output power
–– Aggregate power control tolerance
–– EVM equalizer spectrum flatness
–– Occupied bandwidth
–– Additional maximum power reduction
–– Configured UE transmitted output power
–– Spectrum emission mask
–– Additional spectrum emission mask
–– PRACH time mask
–– SRS time mask
–– Power control absolute power tolerance
–– PUSCH-EVM with exclusion period
–– In-band emissions for non-allocated RB
–– Maximum power reduction
–– Frequency error
–– Error vector magnitude
–– Carrier leakage
–– Adjacent channel leakage power ratio
–– General ON/OFF time mask
LTE/LTE-A receiver tests
–– Reference sensitivity level
–– Maximum input level
–– Adjacent channel selectivity (ACS)
–– In-band blocking
–– Reference sensitivity level for CA
–– Maximum input level for CA
–– LTE tiered Rx sensitivity search
–– LTE tiered Rx sensitivity search at UE
W-CDMA/HSPA/HSPA+/DC-HSDPA
call processing
–– Base station (BS) originate/release call
–– Mobile registration
–– Mobile originate (AMR mode)
–– Change channel
–– W-CDMA to GSM handoff
–– Short message service (SMS)
W-CDMA/HSPA/HSPA+/DC-HSDPA
transmitter tests
–– Adjacent channel leakage power ratio (ACLR)
–– Inner loop power control
–– Maximum output power
–– Minimum output power
–– Occupied bandwidth (OBW)
–– Open loop power control
–– Phase discontinuity
–– Spectrum emission mask (SEM)
–– Transmit on/off power
–– Waveform quality
–– HSDPCCH test
–– Base station emulation control
W-CDMA/HSPA/HSPA+/DC-HSDPA receiver
tests
–– Maximum input level (BER)
–– Reference sensitivity level (BER)
–– BLER
GSM/GRPS/EGPRS call processing
–– GSM MS and BS origination
–– GSM MS and BS release
–– GPRS mobile-initiated attach and detach
–– GPRS and EGPRS packet data transfers on uplink and downlink
–– Channel, band, and format changes with continuous attach/
camp
–– Short message service (SMS)
GSM/GRPS/EGPRS transmitter tests
–– GSM/GPRS/EGPRS Tx power
–– EGPRS modulation accuracy
–– GSM/GPRS/EGPRS phase and frequency error
–– Power versus level
–– GSM/GRPS/EGPRS burst timing error
–– GSM/GPRS/EGPRS output RF spectrum
–– GSM/GPRS/EGPRS power versus time
GSM/GRPS/EGPRS receiver tests
–– GSM fast BER
–– GSM BER
–– GSM/GPRS BER
–– GPRS/EGPRS BLER
–– EGPRS SRB bit error
–– Rx level and quality report
General tests
–– Current drain
–– GSM voice quality
–– Data analyzer
–– Keysight 14565B device characterization software control
–– GPIB command send/receive
–– DUT command send/receive
–– LAN command send/receive
03 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
Hardware Supported
Test instruments
–– E7515A UXM wireless communications test set
–– E7530A LTE test application or E7630A LTE lab application
–– E5515E mainframe (or equivalent E5515C/B/T with Options
002 and 003)
–– E1987A fast switching mobile test application (revision
A.14.14 or later)
–– E1963A W-CDMA mobile test application (revision A.19.14 or
later)
–– E6703H W-CDMA lab application (revision H.01.14 or later)
–– E6785H fast switching lab application (revision H.01.15 or
later)
–– E6703H W-CDMA lab application (revision H.01.14 or later)
–– E6785H fast switching lab application (revision H.01.15 or
later)
–– E1968A GSM/GPRS/EGPRS mobile test application (revision
A.07.21 or later)
–– Keysight 66311B, 66319B, and 66321B power supplies
–– Keysight 34970 with 34901A, 34903A, and 34907A data
acquisition/switch unit
PC requirements
–– Operating system: Microsoft
–– Windows 7 Professional and Enterprise
–– Microsoft Visual Studio.NET (for development)
–– Microsoft Internet Explorer version 6.0 or later
–– 600 MHz Pentium III or higher
–– 512 MB RAM minimum (1024 MB is recommended for normal
development)
–– 200 MB free hard drive space
–– CD-ROM
–– GPIB card or converter with VISA drivers
(one per test system)
–– Serial ports for fixtures, device control, and bar code reader
Order Information
–– E6568F UMTS/LTE/LTE-A Wireless Test Manager
–– E6568F-1TP development and run-time license
–– E6568FU upgrade existing E6568x to E6568F
–– E6568FU-1TP development and run-time license
–– E6569F Wireless Test Manager suite, including
E6567F and E6568F
–– E6569F-1TP development and run-time license
Fixtures
–– Tescom TC-5941, TC-5942, and TC-5952B
Adapters
–– Keysight 82357A USB/GPIB interface
–– National Instruments GPIB-USB to GPIB
PC Cards
–– Keysight GPIB
–– National Instruments GPIB
–– Advantech PCI 1750 digital I/O
–– Control RocketPort 95870-3 and 99096-3 multi-port serial
Peripherals
–– Symbol LS-1220-1200A fixed bar code reader
–– Symbol LS-3603MX-1200A, P300FZY, and LS4004I-I100
handheld bar code reader
–– HP printers
–– Epson TM-U200D and TM-U220D strip printer
For More Information
E6568F Wireless Test Manager specifications and product
literature are available at
www.keysight.com/find/e6568f
8960 Series 10 test set specifications, product literature,
application notes, and configuration guide are available at www.keysight.com/find/8960
E7515A UXM test set specifications, product literature,
application notes and configuration guide are available at
www.keysight.com/find/E7515A
04 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
0800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-04-14)
This information is subject to change without notice.
© Keysight Technologies, 2005 - 2014
Published in USA, September 24, 2014
5989-3073EN
www.keysight.com
Similar pages