Home Phone Networking Analog Magnetics Module with 10 Base-T ELECTRONICS INC. EPB5036WG • Optimized For AMD79C978 ,Conexant CN7221 • & National DP83851 Chips • UL/IEC 950 Approved File #132261 • • Supports TUT Systems HPN Architecture • • Meets or exceeds IEEE 802.3 Requirements • • Robust construction allows for reflow processes • • Temperature Range -40°C to +85°C • Electrical Parameters @ 25° C Cut-off Frequency Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Lower Band MHz Upper Band MHz 6.0-9.0 MHz 6.0-9.0 MHz @1 MHz @ 27 MHz 4.0-5.8 9-11 -3 -12 -60 -55 Filter Characteristic Impedance : 100 Ω • Isolation : 1500 Vrms • • Schematic HPNA 10 Base-T Cable Side Chip Side Chip Side 1:1 7+ 9 (TIP) Cable Side 1:1 RX+ 2 15 RX+ 14 RCT Sidactor .001 µF, 2000 V BPF RX- 1 8- 10 (RING) Gnd 6 TX+ 5 16 RX- 1CT: 2 12 TX+ 11 TXCT TXCT 3 13 TX- TX- 4 Package A Dimensions N J Dim. Pin 1 I.D. PCA EPB5036WG Date Code B Pad Layout Q D A B C D E F G H I J K L M N P Q P M E C K L H I F G PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 CSB5036WG Rev. Orig. (Inches) Min. Max. Nom. (Millimeters) Min. Max. Nom. .990 .470 .250 --.010 --.720 .016 .008 --0° .025 --------- 25.15 11.94 6.35 --.254 --18.29 .406 .203 --0° .635 --------- 1.01 .490 .270 --.015 --.740 .022 .012 --8° .045 --------- 1.00 .480 .260 .700 .012 .100 .730 .018 .010 .150 4° .035 .050 .100 .090 .760 1/10/01 Product performance is limited to specified parameters. Data is subject to change without prior notice. 25.65 12.45 6.86 --.381 --18.80 .559 .305 --8° 1.14 --------- 25.40 12.19 6.60 17.78 .305 2.54 18.54 .457 .254 3.81 4° .889 1.27 2.54 2.29 19.30 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com