SunLED AMR14C2 13.8mm (0.54â ) 14 segment dual digit alphanumeric display Datasheet

Part Number:
AMR14C2
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
Features
● 0.54 INCH CHARACTER HEIGHT.
●LOW CURRENT OPERATION.
●HIGH CONTRAST AND LIGHT OUTPUT.
● EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
● CATEGORIZED FOR LUMINOUS INTENSITY.
● MECHANICALLY RUGGED.
● STANDARD: GRAY FACE, WHITE SEGMENT.
● RoHS COMPLIANT.
Notes:
Operating Characteristics
(TA=25°C)
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=10mA)
λP
660
nm
Wavelength of Dominant
Emission (Typ.)
(IF=10mA)
λD
640
nm
Spectral Line Full Width At
Half-Maximum (Typ.)
(IF=10mA)
Δλ
20
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
45
pF
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
155
mA
Power Dissipation
PT
75
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Red
Published Date : MAR 13 ,2008
V
2.5
Forward Current
AMR14C2
1.8
VF
V
Emitting
Color
VF
Forward Voltage (Max.)
(IF=10mA)
5
Part
Number
Forward Voltage (Typ.)
(IF=10mA)
Unit
VR
Lead Solder Temperature
[2mm Below Package Base]
Unit
MR
(GaAlAs)
Reverse Voltage
Storage Temperature
MR
(GaAlAs)
°C
260°C For 3 –5 Seconds
Emitting
Material
GaAlAs
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
4700
17990
Drawing No : SDSA2371
Wavelength
nm
λP
Description
660
Common Cathode. Rt. Hand Decimal
V3
Checked : Shin Chi
P.1/4
Part Number:
www.SunLED.com
AMR14C2
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
™ MR
Published Date : MAR 13 ,2008
Drawing No : SDSA2371
V3
Checked : Shin Chi
P.2/4
Part Number:
AMR14C2
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
AMR14C2
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 13 ,2008
Drawing No : SDSA2371
V3
Checked : Shin Chi
P.3/4
Part Number:
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 13 ,2008
AMR14C2
Drawing No : SDSA2371
AMR14C2
V3
Checked : Shin Chi
P.4/4
Similar pages