MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type FEATURES W Lead (Pb)-free product RoHS compliant product I RATED CAPACITANCE 1 µF to 400 µF h CAPACITANCE TOLERANCE ±5% 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm W I DC VOLTAGE RATING 85 °C 450 V 700 V 900 V 1100 V 1200 V 70 °C 500 V 800 V 1100 V 1350 V 1500 V 105 °C 300 V 500 V 650 V 800 V 850 V INSULATION RESISTANCE Marking h RC between leads, after 1 min > 10 000 s For UNdc ≤ 500 V measuring voltage 100 V For UNdc > 500 V measuring voltage 500 V SELF INDUCTANCE (Ls) 6-2 Ø dt < 1 nH per mm of lead spacing TEST VOLTAGE BETWEEN TERMINALS P1 ± 0.5 P2 ± 0.5 Dimensions in millimeters Ø dt ± 10 % of standard diameter specified 1.5 UNdc for 10 s CLIMATIC TESTING CLASS 40/85/56 APPLICATIONS High performance DC filtering applications REFERENCE STANDARDS IEC 61071 IEC 60068 MAXIMUM APPLICATION TEMPERATURE 85 °C MAXIMUM OPERATING TEMPERATURE (CASE) 105 °C MARKING C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer’s type designation; manufacturer’s logo; year and week of manufacture LIFETIME EXPECTANCY Operation life time > 100 000 h FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNdc; 40 °C DETAIL SPECIFICATION DIELECTRIC Polypropylene film For more detailed data and test requirements, contact: [email protected] ELECTRODES Metallized dielectric capacitor CONSTRUCTION Mono construction ENCAPSULATION Plastic case, sealed with resin Flame retardant TERMINALS Tinned wires Document Number: 28164 Revision: 02-Feb-09 For technical questions, contact: [email protected] www.vishay.com 281 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 10 4 100 5 1000 6 10 000 7 MKP 1848 Example: 6 12 512 1200 nF 1.2 µF 612 12 000 nF 12 µF 712 120 000 nF 120 µF 09 4 P P1 (mm) PITCH CODE 27.5 K 37.5 P 52.5 Y 4 SPECIAL CODE FOR TERMINAL TYPE CONSTRUCTION TOLERANCE METALLIZED POLYPROPYLENE 4 ±5% VOLTAGE 2 2 pins 4 4 pins P2 = 10.2 mm 5 4 pins P2 = 20.3 mm (1) Customized Un = 45 = 450 V Un = 70 = 700 V Un = 09 = 900 V Un = 91 = 1100 V Un = 92 = 1200 V Note (1) Tabs terminals or customized terminals are available on request SPECIFIC REFERENCE DATA 450 Vdc UNdc = 450 V, UNdc70 °C = 500 V, UNdc105 °C = 300 V CAP. DIMENSIONS (mm) (4) (µF) W H L 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 22 25 30 9.0 9.0 11.0 11.0 13.0 15.0 15.0 18.0 18.0 18.0 21.0 18.5 18.5 18.5 21.5 21.5 21.5 24.0 19.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 28.0 28.0 31.0 35.5 35.5 35.5 38.5 38.5 38.5 44.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 43.0 43.0 42.0 (5) www.vishay.com 282 tan δ tan δ 10 kHz MASS SPQ 1 kHz -4 < (10-4) < (10 ) PART NUMBER (1) 2 4 2 4 2 4 2 4 (mm) (mm) (mm) (V/µs) (A) pins pins pins pins pins pins pins (g) (pcs) pins P1 P2 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Ø dt dV/dt IPEAK 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 75 75 75 75 75 75 75 75 75 75 75 40 40 40 40 40 40 40 75 150 225 300 375 450 525 600 675 750 900 400 480 600 800 880 1000 1200 IRMS (A) (2) 1.5 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.0 8.0 6.0 7.0 7.5 9.0 9.5 10.0 11.0 6.5 7.5 8.0 10 10.0 10.5 12.0 ESR (mΩ) (3) 115 57.5 38.5 30.0 23.0 19.0 16.5 14.0 13.0 11.5 10.0 23.0 19.0 15.0 11.5 10.5 9.5 7.5 20.5 17.0 13.0 13.5 9.5 8.5 8.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 For technical questions, contact: [email protected] 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 185 185 185 185 185 185 185 6.8 6.0 9.2 8.4 10.7 12.5 11.7 17.2 16.3 15.4 22.2 37.5 36.1 33.9 41.6 40.1 37.8 50 160 160 130 130 115 100 100 80 80 80 65 105 105 105 91 91 91 77 MKP1848510454K2 MKP1848520454K2 MKP1848530454K2 MKP1848540454K2 MKP1848550454K2 MKP1848560454K2 MKP1848570454K2 MKP1848580454K2 MKP1848590454K2 MKP1848610454K2 MKP1848612454K2 MKP1848610454P* MKP1848612454P* MKP1848615454P* MKP1848620454P* MKP1848622454P* MKP1848625454P* MKP1848630454P* Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type CAP. (5) (µF) DIMENSIONS (mm) (4) W H L P1 P2 Ø dt dV/dt IPEAK IRMS (A) (2) ESR (mΩ) (3) tan δ 1 kHz < (10-4) Vishay Roederstein tan δ 10 kHz < (10-4) MASS SPQ PART NUMBER (1) 2 4 2 4 2 4 2 4 (mm) (mm) (mm) (V/µs) (A) pins pins pins pins pins pins pins pins 30.0 45.0 42.0 37.5 10.2 / 1.0 40 1400 14.0 20.3 40 30.0 45.0 42.0 37.5 10.2 / 1.0 40 1600 14.5 20.3 40 25.0 45.0 57.5 52.5 20.3 1.2 20 800 11.0 45 25.0 45.0 57.5 52.5 20.3 1.2 20 900 12.0 50 30.0 45.0 57.5 52.5 20.3 1.2 20 1000 13.0 55 30.0 45.0 57.5 52.5 20.3 1.2 20 1100 14.0 60 30.0 45.0 57.5 52.5 20.3 1.2 20 1200 14.5 65 35.0 50.0 57.5 52.5 20.3 1.2 20 1300 16.0 70 35.0 50.0 57.5 52.5 20.3 1.2 20 1400 17.0 75 35.0 50.0 57.5 52.5 20.3 1.2 20 1500 17.5 80 35.0 50.0 57.5 52.5 20.3 1.2 20 1600 18.0 90 45.0 45.0 57.5 52.5 20.3 1.2 20 1800 95 45.0 45.0 57.5 52.5 20.3 1.2 20 1900 100 45.0 45.0 57.5 52.5 20.3 1.2 20 2000 200 70.0 60.0 57.5 52.5 20.3 1.2 20 2000 400 130.0 60.0 57.5 52.5 20.3 1.2 10 4000 Notes (1) Change the * symbol with special code for the terminals (2) Maximum rms current at 10 kHz, + 85 °C, Cap. tol. ≤ ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Standard dimension (5) Intermediate capacitance values available on request. • SPQ = Standard Packing Quantity 35 (g) (pcs) 15.0 6.5 5.9 22.0 20.0 200 185 67 63 MKP1848635454P* 15.5 6.0 5.0 22.0 20.0 200 185 63 63 MKP1848640454P* 11.5 10.0 40.0 36.0 400 370 10.0 9.0 40.0 36.0 400 370 9.0 8.5 40.0 36.0 400 370 8.5 7.5 40.0 36.0 400 370 7.5 6.5 40.0 36.0 400 370 7.0 6.0 40.0 36.0 400 370 6.5 6.0 40.0 36.0 400 370 6.0 5.5 40.0 36.0 400 370 5.5 5.0 40.0 36.0 400 370 4.5 - 36.0 370 4.0 - 36.0 370 4.0 - 36.0 370 2.0 - 36.0 370 1.0 - 36.0 370 77 73 104 100 95 119 117 113 106 192 192 192 451 946 55 55 45 45 45 40 40 40 40 30 30 30 20 10 MKP1848640454Y* MKP1848645454Y* MKP1848650454Y* MKP1848655454Y* MKP1848660454Y* MKP1848665454Y* MKP1848670454Y* MKP1848675454Y* MKP1848680454Y* MKP1848690454Y5 MKP1848695454Y5 MKP1848710454Y5 MKP1848720454Y5 MKP1848740454Y5 12.0 13.0 14.0 15.0 15.5 17.0 18.0 18.5 19.0 15.5 15.5 16.0 38.0 68.0 SPECIFIC REFERENCE DATA 700 Vdc UNdc = 700 V, UNdc70 °C = 800 V, UNdc105 °C = 500 V CAP. DIMENSIONS (5) (mm) (4) P1 P2 Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) IRMS (A) (2) 2 pins 1.5 2.5 3.0 4.0 4.5 6.0 6.5 7.0 7.5 8.5 7.0 7.5 8.0 10.0 11.0 12.0 4 pins 7.5 8.0 9.0 11.0 12.0 13.0 ESR (mΩ) (3) 2 pins 94.0 47.0 31.5 23.5 19.0 16.0 13.5 12.0 10.5 9.5 19.5 16.5 13.0 10.0 9.0 8.0 (µF) W H L 1 2 3 4 5 6 7 8 9 10 10 12 15 20 22 25 9.0 9.0 11.0 13.0 15.0 18.0 18.0 18.0 21.0 21.0 18.5 18.5 18.5 21.5 24.0 24.0 19.0 19.0 21.0 23.0 25.0 28.0 28.0 28.0 31.0 31.0 35.5 35.5 35.5 38.5 44.0 44.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 42.0 42.0 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 10.2 10.2 10.2 10.2 10.2 10.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 30 65 130 195 260 325 390 455 520 585 650 300 360 450 600 660 750 30 30.0 45.0 42.0 37.5 1.0 30 900 14.0 14.5 6.5 35 30.0 45.0 42.0 37.5 1.0 30 1050 15.0 15.5 5.5 30 35 40 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 25.0 45.0 57.5 52.5 10.2 / 20.3 10.2 / 20.3 20.3 20.3 20.3 1.2 1.2 1.2 15 15 15 Document Number: 28164 Revision: 02-Feb-09 4 pins 17.5 15.0 11.5 9.0 8.0 7.0 tan δ 1 kHz < (10-4) 2 pins 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 19.0 19.0 19.0 19.0 19.0 19.0 4 pins 17.0 17.0 17.0 17.0 17.0 17.0 tan δ 10 kHz < (10-4) 2 pins 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 4 pins 160 160 160 160 160 160 MASS SPQ PART NUMBER (1) (g) (pcs) 6.6 5.6 8.5 10.5 12.1 17.4 16.2 15.1 22.5 21.3 35.5 33.7 30.8 37.3 51 48 160 160 130 115 100 80 80 80 65 65 105 105 105 91 77 77 MKP1848510704K2 MKP1848520704K2 MKP1848530704K2 MKP1848540704K2 MKP1848550704K2 MKP1848560704K2 MKP1848570704K2 MKP1848580704K2 MKP1848590704K2 MKP1848610704K2 MKP1848610704P* MKP1848612704P* MKP1848615704P* MKP1848620704P* MKP1848622704P* MKP1848625704P* 6.0 19.0 17.0 170 160 64 63 MKP1848630704P* 5.0 19.0 17.0 170 160 58 63 MKP1848635704P* 450 10.5 11.5 13.0 11.5 35.0 33.0 350 320 525 11.5 12.0 11.0 10.0 35.0 33.0 350 320 600 12.0 12.5 10.0 9.0 35.0 33.0 350 320 78 73 68 55 55 55 MKP1848630704Y* MKP1848635704Y* MKP1848640704Y* For technical questions, contact: [email protected] www.vishay.com 283 MKP 1848 DC-Link Vishay Roederstein CAP. DIMENSIONS (5) (mm) (4) (µF) W H L P1 P2 Metallized Polypropylene Film Capacitors DC Capacitor MKP Type IRMS (A) (2) Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) 2 pins 13.5 14.5 16.0 17.0 17.5 - 45 30.0 45.0 57.5 52.5 20.3 1.2 15 675 50 30.0 45.0 57.5 52.5 20.3 1.2 15 750 55 35.0 50.0 57.5 52.5 20.3 1.2 15 825 60 35.0 50.0 57.5 52.5 20.3 1.2 15 900 65 35.0 50.0 57.5 52.5 20.3 1.2 15 975 70 45.0 45.0 57.5 52.5 20.3 1.2 15 1050 75 45.0 45.0 57.5 52.5 20.3 1.2 15 1125 80 45.0 45.0 57.5 52.5 20.3 1.2 15 1200 160 70.0 60.0 57.5 52.5 20.3 1.2 15 2400 320 130.0 60.0 57.5 52.5 20.3 1.2 15 4800 Notes (1) Change the * symbol with special code for the terminals (2) Maximum rms current at 10 kHz, + 85 °C, Cap. tol. ≤ ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Standard dimension (5) Intermediate capacitance values are available on request. • SPQ = Standard Packing Quantity 4 pins 14.5 15.5 17.0 18.0 18.5 20.0 21.0 21.5 38.0 65.0 ESR (mΩ) (3) 2 pins 9.0 8.0 7.0 6.5 6.0 - 4 pins 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.5 2.2 1.0 tan δ 10 kHz < (10-4) tan δ 1 kHz < (10-4) 2 pins 35.0 35.0 35.0 35.0 35.0 - 4 pins 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 2 pins 350 350 350 350 350 - MASS SPQ 4 pins 320 320 320 320 320 320 320 320 320 320 PART NUMBER (1) (g) (pcs) 99 92 117 112 104 192 192 192 451 821 45 45 40 40 40 30 30 30 20 10 MKP1848645704Y* MKP1848650704Y* MKP1848655704Y* MKP1848660704Y* MKP1848665704Y* MKP1848670704Y5 MKP1848675704Y5 MKP1848680704Y5 MKP1848716704Y5 MKP1848732704Y5 SPECIFIC REFERENCE DATA 900 Vdc UNdc = 900 V, UNdc70 °C = 1100 V, UNdc105 °C = 650 V CAP. (5) DIMENSIONS (mm) (4) (µF) W H L 1.0 2.0 3.0 4.0 5.0 6.0 5.0 6.0 7.0 8.0 9.0 10.0 12.0 15.0 16.0 9.0 13.0 15.0 18.0 21.0 21.0 18.5 18.5 18.5 18.5 18.5 21.5 21.5 24.0 24.0 19.0 23.0 25.0 28.0 31.0 31.0 35.5 35.5 35.5 35.5 35.5 38.5 38.5 44.0 44.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 43.0 43.0 43.0 42.0 42.0 P1 P2 Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 20.0 30.0 45.0 42.0 37.5 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 / 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 80 80 80 80 80 80 40 40 40 40 40 40 40 40 40 80 160 240 320 400 480 200 240 280 320 360 400 480 600 640 1.0 40 800 IRMS (A) (2) 2 pins 2.0 2.5 3.5 4.0 5.0 5.5 4.0 4.5 5.0 5.0 5.5 6.0 6.5 8.0 8.0 2 pins 88.0 44.0 29.5 22.0 18.0 15.0 36.5 30.0 26.0 22.5 20.0 18.5 15.0 12.5 11.5 9.5 10.0 9.5 15.0 25.0 45.0 57.5 52.5 1.2 20 300 6.5 20.0 25.0 45.0 57.5 52.5 1.2 20 400 7.0 22.0 25.0 45.0 57.5 52.5 1.2 20 440 7.5 25.0 30.0 45.0 57.5 52.5 1.2 20 500 8.5 30.0 30.0 45.0 57.5 52.5 1.2 20 600 9.5 35.0 35.0 50.0 57.5 52.5 1.2 20 700 10.5 40.0 35.0 50.0 57.5 52.5 1.2 20 800 12.0 45.0 45.0 45.0 57.5 52.5 1.2 20 900 50.0 45.0 45.0 57.5 52.5 1.2 20 1000 100.0 70.0 60.0 57.5 52.5 1.2 20 2000 Notes (1) Change the * symbol with special code for the terminals (2) Maximum rms current at 10 kHz, + 85 °C, Cap. tol. ≤ ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Standard dimension (5) Intermediate capacitance values are available on request. • SPQ = Standard Packing Quantity www.vishay.com 284 4 pins 4.5 5.0 5.5 5.5 6.0 6.5 7.0 8.5 8.5 ESR (mΩ) (3) 7.5 8.0 8.5 9.5 10.5 11.5 13.0 14.0 14.5 25.0 24.5 18.5 16.5 14.5 12.5 10.5 9.5 - 4 pins 32.0 27.0 23.5 20.5 18.5 16.5 13.5 11.0 10.5 2 pins 8.0 8.0 8.0 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 8.5 15.0 22.0 16.5 15.0 13.5 11.0 9.5 8.5 7.5 6.5 3.5 tan δ 10 kHz < (10-4) tan δ 1 kHz < (10-4) 4 pins 13 13 13 13 13 13 13 13 13 2 pins 65 65 65 65 65 65 140 140 140 140 140 140 140 140 140 13 30.0 25 30.0 25 30.0 25 30.0 25 30.0 25 30.0 25 30.0 25 25 25 25 For technical questions, contact: [email protected] 4 pins 125 125 125 125 125 125 125 125 125 MASS SPQ PART NUMBER (1) (g) (pcs) 5.9 11.3 12.1 16.7 23.3 21.4 37.1 35.6 34.1 32.5 30.9 40.7 37.5 48.9 47.2 160 115 100 80 65 65 105 105 105 105 105 91 91 77 77 MKP1848510094K2 MKP1848520094K2 MKP1848530094K2 MKP1848540094K2 MKP1848550094K2 MKP1848560094K2 MKP1848550094P* MKP1848560094P* MKP1848570094P* MKP1848580094P* MKP1848590094P* MKP1848610094P* MKP1848612094P* MKP1848615094P* MKP1848616094P* 140 125 60 63 MKP1848620094P* 275 275 275 275 275 275 275 - 83 75 72 102 92 114 103 192 191 452 55 55 55 45 45 40 40 30 30 20 MKP1848615094Y* MKP1848620094Y* MKP1848622094Y* MKP1848625094Y* MKP1848630094Y* MKP1848635094Y* MKP1848640094Y* MKP1848645094Y5 MKP1848650094Y5 MKP1848710094Y5 250 250 250 250 250 250 250 250 250 250 Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein SPECIFIC REFERENCE DATA 1100 Vdc UNdc = 1100 V, UNdc70 °C = 1350 V, UNdc105 °C = 800 V CAP. DIMENSIONS (5) (mm) (4) P1 (µF) W H L 1 2 3 4 5 6 7 8 9 10 11.0 15.0 18.0 21.0 18.5 18.5 21.5 21.5 24.0 24.0 21.0 25.0 28.0 31.0 35.5 35.5 38.5 38.5 44.0 44.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 42.0 42.0 12 30.0 45.0 42.0 37.5 P2 Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 10.2 10.2 10.2 10.2 10.2 10.2 10.2 / 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 IRMS (A) (2) ESR (mΩ) (3) tan δ 1 kHz < (10-4) tan δ 10 kHz < (10-4) 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 95 95 95 95 45 45 45 45 45 45 95 190 285 380 225 270 315 360 405 450 2.5 3.5 5.0 6.5 5.5 6.0 7.0 4.5 8.5 9.0 1.0 45 540 10.5 11.0 10.5 9.5 13.0 12.0 115 105 10 25.0 45.0 57.5 52.5 1.2 23 230 7.5 12 25.0 45.0 57.5 52.5 1.2 23 276 8.0 15 25.0 45.0 57.5 52.5 1.2 23 345 9.0 20 30.0 45.0 57.5 52.5 1.2 23 460 11.0 22 35.0 50.0 57.5 52.5 1.2 23 506 12.5 25 35.0 50.0 57.5 52.5 1.2 23 575 13.5 30 45.0 45.0 57.5 52.5 1.2 23 720 60 70.0 60.0 57.5 52.5 1.2 23 1500 Notes (1) Change the * symbol with special code for the terminals (2) Maximum rms current at 10 kHz, + 85 °C, Cap. tol. ≤ ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Standard dimension (5) Intermediate capacitance values are available on request. • SPQ = Standard Packing Quantity 6.0 6.5 7.5 5.0 9.0 9.5 8.5 9.0 10.0 12.0 13.5 14.5 16.5 30.0 62.0 31.0 21.0 15.5 25.5 21.5 18.5 16.0 14.0 13.0 25.5 21.5 17.0 12.5 11.5 10.5 - 23.0 19.0 16.5 14.5 13.0 11.5 23.0 19.5 15.5 11.5 10.5 9.0 7.5 3.5 7.0 7.0 7.0 7.0 13.0 13.0 13.0 13.0 13.0 13.0 25.0 25.0 25.0 25.0 25.0 25.0 - 12.0 12.0 12.0 12.0 12.0 12.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 55 55 55 55 115 115 115 115 115 115 230 230 230 230 230 230 - 105 105 105 105 105 105 210 210 210 210 210 210 210 210 MASS SPQ PART NUMBER (1) (g) (pcs) 9.1 12.3 16.0 21.8 33.7 31.4 40.5 38.2 52 49 130 100 80 65 105 105 91 91 77 77 MKP1848510914K2 MKP1848520914K2 MKP1848530914K2 MKP1848540914K2 MKP1848550914P* MKP1848560914P* MKP1848570914P* MKP1848580914P* MKP1848590914P* MKP1848610914P* 66 63 MKP1848612914P* 84 80 73 94 119 112 192 452 55 55 55 45 40 40 30 20 MKP1848610914Y* MKP1848612914Y* MKP1848615914Y* MKP1848620914Y* MKP1848622914Y* MKP1848625914Y* MKP1848630914Y5 MKP1848660914Y5 SPECIFIC REFERENCE DATA 1200 Vdc UNdc = 1200 V, UNdc70 °C = 1500 V, UNdc105 °C = 850 V CAP. DIMENSIONS (5) (mm) (4) (µF) W H L P1 P2 Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) IRMS (A) (2) ESR (mΩ) (3) tan δ 1 kHz < (10-4) tan δ 10 kHz < (10-4) 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins MASS SPQ PART NUMBER (1) (g) (pcs) 1 11.0 21.0 32.0 27.5 - 0.8 100 100 2.5 - 60.0 - 6.0 - 54 - 8.8 130 2 15.0 25.0 32.0 27.5 - 0.8 100 200 4.0 - 30.0 - 6.0 - 54 - 11.7 100 MKP1848510924K2 MKP1848520924K2 3 18.0 28.0 32.0 27.5 - 0.8 100 300 5.0 - 20.0 - 6.0 - 54 - 15.2 80 MKP1848530924K2 4 21.0 31.0 32.0 27.5 - 0.8 100 400 6.5 - 15.0 - 6.0 - 54 - 20.6 65 MKP1848540924K2 5 18.5 35.5 43.0 37.5 10.2 1.0 48 240 6.0 6.5 24.5 22.0 12.0 11.0 110 100 32.5 105 MKP1848550924P* 6 18.5 35.5 43.0 37.5 10.2 1.0 48 288 6.5 7.0 20.0 18.5 12.0 11.0 110 100 30.0 105 MKP1848560924P* 7 21.5 38.5 43.0 37.5 10.2 1.0 48 336 7.5 8.0 17.5 15.5 12.0 11.0 110 100 38.9 91 MKP1848570924P* 8 21.5 38.5 43.0 37.5 10.2 1.0 48 384 8.0 8.5 15.5 14.0 12.0 11.0 110 100 36.3 91 MKP1848580924P* 9 24.0 44.0 42.0 37.5 10.2 1.0 48 432 9.0 9.5 13.5 12.5 12.0 11.0 110 100 50 77 MKP1848590924P* 10 24.0 44.0 42.0 37.5 10.2 1.0 48 480 9.5 10.0 12.5 11.0 12.0 11.0 110 100 47 77 MKP1848610924P* 12 30.0 45.0 42.0 37.5 10.2 / 20.3 1.0 48 576 11.0 11.5 10.0 9.0 12.0 11.0 110 100 63 63 MKP1848612924P* 10 25.0 45.0 57.5 52.5 20.3 1.2 24 240 7.5 8.5 24.5 21.5 23.0 21.0 220 200 82 55 MKP1848610924Y* 12 25.0 45.0 57.5 52.5 20.3 1.2 24 288 8.5 9.5 20.5 18.5 23.0 21.0 220 200 77 55 MKP1848612924Y* Document Number: 28164 Revision: 02-Feb-09 For technical questions, contact: [email protected] www.vishay.com 285 MKP 1848 DC-Link Vishay Roederstein CAP. DIMENSIONS (5) (mm) (4) (µF) W H L P1 P2 Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Ø dt dV/dt IPEAK (mm) (mm) (mm) (V/µs) (A) IRMS (A) ESR (mΩ) (3) tan δ 1 kHz < (10-4) tan δ 10 kHz < (10-4) 2 4 2 4 2 4 2 4 pins pins pins pins pins pins pins pins MASS SPQ PART NUMBER (1) (g) (pcs) 15 25.0 45.0 57.5 52.5 20.3 1.2 24 360 9.5 10.5 16.5 14.5 23.0 21.0 220 200 69 55 MKP1848615924Y* 20 35.0 50.0 57.5 52.5 20.3 1.2 24 480 12.5 13.5 12.5 11.0 23.0 21.0 220 200 119 40 MKP1848620924Y* 114 104 191 450 40 40 30 15 MKP1848622924Y* MKP1848625924Y* MKP1848630924Y5 MKP1848660924Y5 22 35.0 50.0 57.5 52.5 20.3 1.2 24 528 13.0 25 35.0 50.0 57.5 52.5 20.3 1.2 24 600 14.0 30 45.0 45.0 57.5 52.5 20.3 1.2 24 750 60 70.0 60.0 57.5 52.5 20.3 1.2 24 1560 Notes (1) Change the * symbol with special code for the terminals (2) Maximum rms current at 10 kHz, + 85 °C, Cap. tol. ≤ ± 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Standard dimension (5) Intermediate capacitance values are available on request. • SPQ = Standard Packing Quantity 14.0 11.0 10.0 23.0 21.0 220 200 15.0 10.0 9.0 23.0 21.0 220 200 17.0 7.0 - 21.0 200 28.5 3.5 - 21.0 200 CONSTRUCTION Description Low inductive wound cell elements of metallised polypropylene film, potted with resin in a flame retardant case. MOUNTING The capacitors unit is designed for mounting on PCB. The capacitors shall be mechanically fixed by the leads and body must be clamped to withstand vibration and shock. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the figure: • Eccentricity as in figure. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned • Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.5 mm bmax. = b + 0.5 mm Eccentricity Imax. = I + 0.5 mm Storage temperature • Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. www.vishay.com 286 For technical questions, contact: [email protected] Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein CHARACTERISTICS Capacitance (typical curve) Insulation resistance (typical curve) 105 RC (s) C/C (%) 4 2 0 104 -2 -4 -6 - 60 103 -20 0 60 Tamb (°C) 100 20 Lifetime expectancy (typical curve) 20 40 80 100 Tamb (°C) 60 Impedance vs. frequency (typical curve) 10.0 1.5 Pitch 27.5 mm 1.4 1.3 1.2 1.0 1.0 Hot spot temperature 105 °C 85 °C Z (Ω) Uopdc/UNdc 1.1 70 °C 2. 0 4. 0 8. 0 µF µF µF 0.9 0.1 0.8 0.7 0.6 0.5 102 103 104 105 106 Lifetime expectancy (h) 0.01 104 Impedance vs. frequency (typical curve) 106 f (Hz) 107 Impedance vs. frequency (typical curve) 10.0 Z (Ω) Pitch 37.5 mm Pitch 52.5 mm Z (Ω) 10.0 1.0 1.0 0.1 105 15 2 .0 µ 40 5.0 F .0 µF µF 0.1 0.01 0.01 0.0 104 Document Number: 28164 Revision: 02-Feb-09 45 6 .0 80 0.0 µF .0 µF µF 105 106 f (Hz) 107 0.0 104 105 For technical questions, contact: [email protected] 106 f (Hz) 107 www.vishay.com 287 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein MAXIMUM PEAK TO PEAK RIPPLE VOLTAGE AS A FUNCTION OF FREQUENCY 100 2.0 Peak to peak ripple voltage (Upp) (1) 85 °C < Tamb ≤ 105 °C, 450 Vdc µF µF 8.0 µF 15 µF 35 µF 450 µF 8 µF 2.0 µF 8.0 µF 15 µF 35 µF 450 µF 8 Peak to peak ripple voltage (Upp) (1) 100 Tamb ≤ 85 °C, 450 Vdc 10 102 (1) 10 103 104 f (Hz) (1) Limited by maximum ripple voltage 0.1 x UNdc 104 105 f (Hz) Limited by maximum ripple voltage 0.1 x UNdc 100 85 °C < Tamb ≤ 105 °C, 700 Vdc µF Tamb ≤ 85 °C, 700 Vdc 10 102 (1) 103 104 f (Hz) 105 10 102 (1) Limited by maximum ripple voltage 0.1 x UNdc µF µF 8.0 µF 12 µF 30 µF 55 µF 80 µF 8.0 µF 12 µF 30 µF 55 µF 80 2.0 Peak to peak ripple voltage (Upp) (1) 2.0 Peak to peak ripple voltage (Upp) (1) 100 103 102 105 103 104 f (Hz) 105 Limited by maximum ripple voltage 0.1 x UNdc 100 µF 104 Limited by maximum ripple voltage 0.1 x UNdc www.vishay.com 288 f (Hz) 105 µF 2.0 µF 5.0 µF 8.0 µF 15 F µ 20 µF 50 5.0 (1) µF µF 8.0 µF 15 µF 20 µF 50 Tamb ≤ 85 °C, 900 Vdc 10 2 103 10 85 °C < Tamb ≤ 105 °C, 900 Vdc Peak to peak ripple voltage (Upp) (1) 2.0 Peak to peak ripple voltage (Upp) (1) 100 10 102 (1) 103 104 f (Hz) 105 Limited by maximum ripple voltage 0.1 x UNdc For technical questions, contact: [email protected] Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein MAXIMUM PEAK TO PEAK RIPPLE VOLTAGE AS A FUNCTION OF FREQUENCY 1000 1000 Peak to peak ripple voltage (Upp) (1) Peak to peak ripple voltage (Upp) (1) 85 °C < Tamb ≤ 105 °C, 1100 Vdc 100 2 5 .0 10 .0 µ µF 1 µ F 30 2 µ F µF F 100 2 5 .0 10 .0 µ µF 1 µ F 30 2 µ F µF F Tamb ≤ 85 °C, 1100 Vdc 10 102 (1) 103 104 f (Hz) (1) Limited by maximum ripple voltage 0.1 x UNdc 103 104 f (Hz) 105 Limited by maximum ripple voltage 0.1 x UNdc 1000 Peak to peak ripple voltage (Upp) (1) 1000 100 µF 0 2. µF 0 5. µF 10 µF 12 µF 30 Peak to peak ripple voltage (Upp) (1) 10 102 105 85 °C < Tamb ≤ 105 °C, 1200 Vdc 100 2 5 .0 10 .0 µ µF 1 µ F 30 2 µ F µF F Tamb ≤ 85 °C, 1200 Vdc 10 10 103 102 (1) 104 f (Hz) Limited by maximum ripple voltage 0.1 x UNdc Document Number: 28164 Revision: 02-Feb-09 105 102 (1) 103 104 f (Hz) 105 Limited by maximum ripple voltage 0.1 x UNdc For technical questions, contact: [email protected] www.vishay.com 289 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type HEAT CONDUCTIVITY AND HOT SPOT TEMPERATURE HEAT CONDUCTIVITY (mW/°C) Wmax. (mm) PITCH 27.5 mm PITCH 37.5 mm PITCH 52.5 mm 9.0 31 - - 11.0 37 - - 13.0 42 - - 15.0 48 - - 18.0 58 - - 18.5 - 89 - 21.0 68 - - 21.5 - 102 - 24.0 - 116 - 25.0 - - 152 30.0 - 134 181 35.0 - - 197 45.0 - - 213 87.0 - - 341 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G: • ΔT = Component temperature rise (°C) • P = Power dissipation of the component (mW) • G = Heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by ΔT = Tc - Tamb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. www.vishay.com 290 For technical questions, contact: [email protected] Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type Vishay Roederstein APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP+) shall not be greater than the rated DC voltage (UNdc) 2. The peak-to-peak ripple voltage (UP-P) shall not be greater than 0.1 x (UNdc) Voltage (V) Non reversing recurrent waveform Up+ UNdc Upt 3. The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 × ∫ ⎛ --------⎞ × dt < U Ndc × ⎛ --------⎞ ⎝ dt ⎠ rated ⎝ dt ⎠ 0 T is the pulse duration 4. The maximum component surface temperature rise must be lower than 15 °C. MAXIMUM REPETITIVE PEAK VOLTAGES The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x UNdc 30 % on load duration 1.15 x UNdc 30 min 1.2 x UNdc 5 min 1.3 x UNdc 1 min 1.5 x UNdc 110 ms Document Number: 28164 Revision: 02-Feb-09 For technical questions, contact: [email protected] www.vishay.com 291 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type INSPECTION REQUIREMENTS General Notes: Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071. SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST-FINAL INSPECTION 5.14.2.1 External inspection, visual examination Legible marking as specified 5.14.2.2 Dimensions See specification drawing 5.3.1 Capacitance 1 kHz at room temperature See specific reference data 5.3.2 tan δ 1 kHz at room temperature See specific reference data 10 kHz at room temperature 5.5.1.2 Voltage test between terminal 1.5 x UNdc at Tamb. Duration 10 s No visible damage or puncture No flashover 5.7 Insulation resistance UNdc ≤ 500 V measuring voltage 100 V at room temperature See specific reference data UNdc > 500 V m,easuring voltage 500 V at room temperature Duration 1 min TYPE TESTS 5.14.2 External inspection 5.14.0 Initial measurements 5.14.1.1.4 Robustness of terminations IEC 60068-2-21 5.14.1.6 Resistance to soldering heat IEC 60068-2-20 5.14.4 Final measurements 5.14.0 Initial measurements 5.14.3.1 Vibration IEC 60068-2-6 Check for finish, marking and overall dimensions Capacitance at 1 kHz tan δ at 10 kHz Tensile Ua1 Wire diameter section load ≤ 0.8 mm ≤ 0.5 mm2 10 N ≤ 1.25 mm ≤ 1.2 mm2 20 N Duration 10 s ± 1 s Bending Ub method 1 Wire diameter section load ≤ 0.8 mm ≤ 0.05 mm3 10 N ≤ 1.25 mm ≤ 0.019 mm3 20 N 4 x 90 °, Duration 2 s to 3 s/bend No predrying, Method 1A Solder bath: 260 °C ± 5 °C Capacitance tan δ 5.14.4 Final measurements www.vishay.com 292 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 Capacitance at 1 kHz tan δ at 10 kHz 10 Hz to 55 Hz: amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles, 3 axes offset from each other by 90° 1 octave/min 5.14.3.2 Shock or impact IEC 60068-2-6 Legible marking and finish as specified Dimensions: see specific drawing Pulse shape: half sine Acceleration: 490 m/s2 Duration t of pulse: 11 ms Visual examination Capacitance tan δ For technical questions, contact: [email protected] No visible damage No visible damage |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 Document Number: 28164 Revision: 02-Feb-09 MKP 1848 DC-Link Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SUB-CLAUSE NUMBER AND TEST CONDITIONS 5.5.3.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz R insulation 5.5.3.2 Voltage test between terminal 5.5.3.3 Final measurements 5.9.1 Initial measurements 1.5 x UNdc at Tamb. Duration 60 s Capacitance tan δ R insulation Capacitance at 1 kHz tan δ at 10 kHz 5.9.2 Surge discharge test 1.1 x UNdc Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9.3 Voltage test between terminal Within 5 min after the surge discharge test Duration 60 s 1.5 x UNdc at Tamb. 5.9.3 Final measurements Capacitance tan δ at 10 kHz 5.11.1 5.11.2 Initial measurements Self healing test with a max. of 2.5 x UNdc for a duration of 10 s Capacitance tan δ 5.13.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.13.1 Change of temperature acc to IEC 60068-2-14 5.13.2 Damp heat steady state Acc. to IEC 60068-2-78 Test Nb Tmax. = 85 °C Tmin. = - 40 °C Transition time: 1 h, equivalent to 1 °C/min 5 cycles Test Ca Tmax. = 40 ± 2 °C RH = 93 ± 3 % Duration 56 days 5.5.3.2 Voltage test between terminal 5.13.3 Final measurements 1.5 x UNdc at ambient temperature Duration 60 s Visual examination Capacitance tan δ at 1 Urms 10 kHz 5.10.1 Thermal stability test under overload conditions 5.10.2 Final measurements Document Number: 28164 Revision: 02-Feb-09 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 1.2 initial tan δ + 0.0001 R insulation ≥ 50 % of specified values |ΔC/C| ≤ 1.0 % tan δ ≤ 1.2 initial tan δ + 0.0001 Compared to values measured in 5.9.1 1.5 x UNdc Duration 10 s Number of clearings ≤ 5 Clearing = voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur Final measurements Initial measurements PERFORMANCE REQUIREMENTS Capacitance at 1 kHz tan δ at 10 kHz 5.11.3 5.10.0 Vishay Roederstein Capacitance at 1 kHz tan δ at 10 kHz Natural cooling Tamb ± 5 °C 1.21 x Pmax. = (U2/2) x W2 x C x tan δ = 121 x (I2 max./W2 x c) x tan δ2 with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration 48 h Measure the temperature every 1.5 h during the last 6 h Capacitance tan δ at 10 kHz |ΔC/C| ≤ 0.5 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.11.1 No puncturing or flashover Self healing punctures are permitted |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.13.0 temperature rise < 1 °C |ΔC/C| ≤ 2 % Increase of tan δ ≤ 1.2 x initial δ + 0.0150 For technical questions, contact: [email protected] www.vishay.com 293 MKP 1848 DC-Link Vishay Roederstein Metallized Polypropylene Film Capacitors DC Capacitor MKP Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.12 Resonance frequency measurement Impedance analyser at Tamb < 0.9 times the value as specified in typical curve “Resonant frequency” of this specification 5.10.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.15.1 Endurance test between terminals 5.15.2 Final measurements Sequence 1.4 x UNdc at Tmax. = 85 °C Duration 250 h 1000 x discharge at 1.4 x I (maximum repetitive peak current in continuous operation) 1.4 x UNdc at Tmax. = 85 °C Duration 250 h Capacitance tan δ 5.16.3.0 Initial measurements Capacitance at 1 kHz 5.16.3.1 Destruction test sequence DC voltage with superimposed AC voltage switched to high DC voltage 5.5.3 Voltage test between terminal 5.16.3.2 Final measurements www.vishay.com 294 |ΔC/C| ≤ 3 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.15.0 at Tmax. = 85 °C 1.3 x UNdc with superimposed AC voltage at 1.1 x in (Irms) Duration = 5 min Switch to high DC voltage = 2 x UNdc Duration 10 s Apply number of cycles till capacitance drop (open circuit) occur. 1.5 x UNdc at Tamb Duration 60 s Visual examination For technical questions, contact: [email protected] Capacitance value < 10 % of measured in 5.16.3.0 No puncturing or flashover Self healing punctures are permitted Document Number: 28164 Revision: 02-Feb-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1