F Series Vishay BCcomponents Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC tangent line FEATURES D D SH tangent line SH • • • • • High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC APPLICATIONS F F Capacitors with outside and inside kink lead spacing In electronic circuits where low losses and high capacitance per volume are essential, for example: • SMPS • HF ballast • Snubber and high voltage circuits DESIGN QUICK REFERENCE DATA DESCRIPTION Voltage (VDC) CLASS 2 (Y5R) 500, 1000, 2000, 3000 Min. Capacitance (pF) 100 Max. Capacitance (pF) 4700 Mounting Through hole The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm. The capacitors are supplied with kinked leads and lead spacings of 5 mm or 7.5 mm and 10 mm. Encapsulation is made of epoxy-resin, flammable resistant in accordance with “UL 94 V-0” MARKING CAPACITANCE RANGE Marking indicates capacitance value and tolerance in accordance with “EIA 198” and voltage marks. 100 pF to 4700 pF OPERATING TEMPERATURE RANGE - 30 °C to + 125 °C TEMPERATURE COEFFICIENT Y5R (2C4) - 30 °C TO + 85 °C RATED DC VOLTAGE 500 V; 1 kV; 2 kV; 3 kV DIELECTRIC STRENGTH 200 % of rated voltage ± 15 % INSULATION RESISTANCE AT 500 VDC SECTIONAL SPECIFICATIONS ≥ 10 000 MΩ min. IEC 60384-9, EIA 198 TOLERANCE ON CAPACITANCE EXAMPLES OF MARKING CODE Disc size (Dmax.) ≤ 6.5 mm: RP = low loss with T.C. Y5P 101K 2 kV Disc size (Dmax.) ≥ 7.5 mm: BC RP 102K 3 kV ± 10 %; ± 20 % DISSIPATION FACTOR 0.2 % max. AGING typical 0.5 % per time decade Note The capacitors meet the essential requirements of “IEC 60384-9 and EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions www.vishay.com 66 For technical questions, contact: [email protected] Document Number: 28500 Revision: 07-Jan-10 F Series Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC Vishay BCcomponents ORDERING INFORMATION CLEAR TEXT CODE C (pF) 500 V 100 120 150 180 220 270 330 390 470 560 680 820 1000 500 V 1200 1500 1800 2200 2700 1 kV 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 2 kV 100 120 150 180 220 270 330 390 470 560 TOL. (%) DMAX. (mm) LEAD SPACING (mm) (1) SH (mm) 4.0 F101K20Y5RL6.J5. F121K20Y5RL6.J5. F151K20Y5RL6.J5. F181K20Y5RL6.J5. F221K20Y5RL6.J5. F271K20Y5RL6.J5. F331K20Y5RL6.J5. F391K25Y5RL6.J5. F471K25Y5RL6.J5. F561K25Y5RL6.J5. F681K25Y5RL6.J5. F821K29Y5RL6.J5. F102K29Y5RL6.J5. 4.0 F122K33Y5RL6.J5. F152K33Y5RL6.J5. F182K39Y5RL6.J5. F222K39Y5RL6.J5. F272K47Y5RL63J7. 4.0 F101K25Y5RN6.J5. F121K25Y5RN6.J5. F151K25Y5RN6.J5. F181K25Y5RN6.J5. F221K25Y5RN6.J5. F271K29Y5RN6.J5. F331K29Y5RN6.J5. F391K29Y5RN6.J5. F471K29Y5RN6.J5. F561K33Y5RN6.J5. F681K33Y5RN6.J5. F821K39Y5RN6.J5. F102K39Y5RN6.J5. F122K43Y5RN6.J5. F152K43Y5RN6.J5. F182K47Y5RN63J7. F222K53Y5RN63J7. F272K53Y5RN63J7. F332K69Y5RN63J7. F392K69Y5RN63J7. F472K75Y5RN83J0. 4.0 F101K25Y5RP6.K5. F121K25Y5RP6.K5. F151K25Y5RP6.K5. F181K29Y5RP6.K5. F221K29Y5RP6.K5. F271K29Y5RP6.K5. F331K29Y5RP6.K5. F391K33Y5RP6.K5. F471K33Y5RP6.K5. F561K39Y5RP6.K5. 5.0 ± 10 5.0 6.5 7.5 8.5 ± 10 5.0 10.0 12.0 7.5 6.5 7.5 ± 10 5.0 8.5 10.0 11.0 12.5 13.5 7.5 17.5 19.0 10.0 6.5 ± 10 Document Number: 28500 Revision: 07-Jan-10 7.5 5.0 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16TH DIGIT: R = RoHS COMPLIANT 8.5 10.0 For technical questions, contact: [email protected] www.vishay.com 67 F Series Vishay BCcomponents Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC ORDERING INFORMATION CLEAR TEXT CODE C (pF) DMAX. (mm) TOL. (%) LEAD SPACING (mm) SH (1) (mm) 2 kV 680 10.0 5.0 4.0 820 11.0 1000 1200 12.0 1500 7.5 13.5 ± 10 1800 2200 17.5 4.8 2700 19.0 3300 10.0 3900 24.5 4700 3 kV 100 120 150 8.5 180 220 4.0 270 330 7.5 390 10 470 ± 10 560 11 680 820 13.5 1000 1200 15 4.8 1500 1800 19 10.0 2200 2700 21 Notes (1) SH = seated height • Maximum thickness: 500 V = 3.5 mm; 1 kV = 4.5 mm; 2 kV = 5.0 mm; 3 kV = 6.0 mm 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16TH DIGIT: R = RoHS COMPLIANT F681K39Y5RP6.K5. F821K43Y5RP6.K5. F102K43Y5RP6.K5. F122K47Y5RP63K7. F152K53Y5RP63K7. F182K53Y5RP63K7. F222K69Y5RP63K7. F272K75Y5RP83K0. F332K75Y5RP83K0. F392K75Y5RP83K0. F472K96Y5RP83K0. F101K33Y5RR6.K7. F121K33Y5RR6.K7. F151K33Y5RR6.K7. F181K33Y5RR6.K7. F221K33Y5RR6.K7. F271K33Y5RR6.K7. F331K33Y5RR6.K7. F391K39Y5RR6.K7. F471K39Y5RR6.K7. F561K43Y5RR6.K7. F681K43Y5RR6.K7. F821K53Y5RR63K7. F102K53Y5RR63K7. F122K59Y5RR63K7. F152K59Y5RR63K7. F182K75Y5RR83K0. F222K75Y5RR83K0. F272K84Y5RR83K0. PACKAGING PACKAGING TYPE Bulk (long lead L ≥ 25.4 mm Tape and reel 20 to 25 29 to 39 43 to 47 53 to 75 84 to 96 ≤ 47 ≥ 53 Ammopack LEAD SPACE (mm) SIZE CODE ≤ 47 ≥ 53 all ≤ 6.4 ≥ 7.5 all ≤ 6.4 ≥ 7.5 all VOLTAGE (VDC) all < 500 500 ≤ WV ≤ 2000 3000 all all < 500 500 ≤ WV < 2000 2000 and 3000 all all SPQ 1000 1000 1000 500 250 2500 2000 1000 1000 1000 2000 2000 1500 1500 1500 BOX DIMENSIONS LxWxH 245 x 120 x 65 370 x 370 x 60 335 x 240 x 50 335 x 290 x 50 360 x 330 x 55 335 x 290 x 50 Note • The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack www.vishay.com 68 For technical questions, contact: [email protected] Document Number: 28500 Revision: 07-Jan-10 F Series Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC P2 D Vishay BCcomponents P Δh Δh Δs ΔP Δs ΔP H1 W2 H0 L W1 W0 W A e Ød Direction of unreeling P1 D0 F P0 t1 t detail A Kinked capacitors on tape, lead spacing 5.0 mm (0.2") or 7.5 mm (0.3") DIMENSIONS OF TAPE SYMBOL PARAMETER DIMENSIONS (mm) FEED-HOLE PITCH FEED-HOLE PITCH P0 = 12.7 P0 = 15.0 11.0 max. 14.0 max. 0.6 ± 0.05 0.6 ± 0.05 12.7 ± 1.0 15.0 ± 1.0 12.7 ± 0.3 15.0 ± 0.3 D d P (1) P0 Body diameter Lead diameter Pitch between capacitors Feed-hole pitch ΔP P1 (2) P2 (2) F Plane deviation 1.0 max. 1.0 max. Feed-hole center to lead center Feed-hole center to component center Lead spacing 3.85 ± 0.7 6.35 ± 1.3 5.0 + 0.6/- 0.4 3.75 ± 0.7 7.5 ± 1.5 7.5 + 0.6/- 0.4 Δh W W0 W1 W2 H0 H1 e L D0 t t1 Component alignment 0 ± 1.0 0 ± 1.0 Tape width Hold-down tape width Hole position Hold-down tape margin Height to seating plane Maximum component height Lead end protrusion Maximum length of snipped lead Feed-hole diameter Total tape thickness Maximum thickness of tape and wires 18.0 + 1.0/- 0.5 5.0 min. 9.0 + 0.75/- 0.5 3.0 max. 16.0 ± 0.5 32.0 1.0 max. 11.0 4.0 ± 0.2 0.9 max. 1.5 max. 18.0 + 1.0/- 0.5 5.0 min. 9.0 + 0.75/- 0.5 3.0 max. 16.0 ± 0.5 40.0 1.0 max. 11.0 4.0 ± 0.2 0.9 max. 1.5 max. Notes (1) Cumulative pitch error: ± ≤ 1 mm/20 pitches (2) Obliquity maximum 3° Document Number: 28500 Revision: 07-Jan-10 For technical questions, contact: [email protected] www.vishay.com 69 F Series Vishay BCcomponents Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC REEL AND TAPE DATA in millimeters 51 max. 355.6 ± 2.0 28 ± 1.5 8.0 45 max. Reel with capacitors on tape W L H Ammopack with capacitors on tape DIMENSIONS OF AMMOPACK DISC SIZE (DMAX.) PARAMETER UNIT 6.5 mm to 11.0 mm 12.0 mm to 13.5 mm Taping pitch 12.7 15.0 mm L 335 360 mm W 290 330 mm H 50 55 mm www.vishay.com 70 For technical questions, contact: [email protected] Document Number: 28500 Revision: 07-Jan-10 F Series Ceramic Disc Capacitors Class 2, Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC ΔC (%) C Dissipation factor (x 10-4) 60 0 Vishay BCcomponents 140 120 100 80 60 40 20 - 60 - 40 0 -20 0 1 kHz 10 kHz 20 40 60 100 80 100 kHz 1 MHz 120 140 T (°C) 0 Typical capacitance change as a function of temperature and frequency 20 40 1 kHz 10 kHz 60 80 100 kHz 1 MHz 100 120 140 Tamb (°C) Typical dissipation factor as a function of temperature and frequency ΔC (%) C 0 -2 -4 -6 -8 - 10 1 10 102 103 104 105 t (h) Aging rate as a function of time Document Number: 28500 Revision: 07-Jan-10 For technical questions, contact: [email protected] www.vishay.com 71 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000