FL05-0002-G Low Cost SMT High Pass Filter 1700 – 3000 MHz Rev. V2 Features • • • • • • Functional Block Diagram Small Size and Low Profile Superior Repeatability Typical Insertion Loss 0.5 dB Typical Rejection 20 dB 2 Watt Power Handling SOIC-8 Package Description M/A-COM’s FL05-0002-G is an IC-based monolithic high pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The FL05-0002-G is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information Part Number Package FL05-0002-G Bulk Packaging FL05-0002-G-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function Pin No. Function 1 GND 5 GND 2 RF IN 6 GND 3 GND 7 RF OUT 4 GND 8 GND 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL05-0002-G Low Cost SMT High Pass Filter 1700 – 3000 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss: 1700 – 3000 MHz dB — 0.5 1.0 VSWR: 1700 – 3000 MHz — — 1.5:1 1.8:1 Rejection: DC – 1000 MHz dB 15 20 — Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL05-0002-G Low Cost SMT High Pass Filter 1700 – 3000 MHz Rev. V2 SOIC-8† † Reference Application Note M538 for solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.