Aluminum Electrolytic Capacitors NRE-WX Series ULTRA HIGH TEMPERATURE, RADIAL LEADS, POLARIZED ALUMINUM RoHS ELECTROLYTIC CAPACITORS Compliant FEATURES includes all homogeneous materials • HIGH TEMPERATURE 150OC *See Part Number System for Details • CAPACITANCE VALUES (UP TO 1,000µF) • IDEAL FOR ELECTRONIC BALLAST & POWER SUPPLIES • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 5 Minutes Z -25°C/+20°C Z -40°C/+20°C 16 ~ 50Vdc 330 ~ 1,000µF -40°C ~ +150°C ±20% (M) 0.01CV or 3µA whichever is greater 16 25 35 50 0.16 0.12 0.12 2 2 2 4 4 4 Capacitance Change Within ±30% of initial measured value Tan δ Less than 300% of specificed value Leakage Current Less than the specificed maximum value Maximum Tanδ @120Hz/20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life @ 150°C 1,000 hours STANDARD PRODUCT AND CASE SIZES TABLE DφxL (mm) Cap. µF 330 470 1,000 Cap. Code 331 471 102 16 12.5x25 Working Voltage (Vdc) 25 35 12.5x25 - PART NUMBERING SYSTEM NRE-WX 331 M 50V 12.5X25 TB Y F . Series LEAD SPACING AND DIAMETER (mm) Case Dia. (Dφ) Lead Space (F) Lead Dia. (dφ) Dim. α 50 12.5x25 - 12.5 5.0 0.6 1.0 DIMENSIONS (mm) RoHS Compliant TB = Tape & Box* Case Size (DφxL) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier *see tape specification for details Polarity Marking Sleeve + dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α Drawing is representative of parts as supplied in bulk or straight lead format, please see taping specification for details on taped format packaging. Optional: For automotive equipment, sourced to special production and inspection at TS-16949 certified production site STANDARD VALUES, SPECIFICATIONS AND CASE SIZES (mm) Part Number NRE-WX102M16V12.5x25F NRE-WX471M35V12.5x25F NRE-WX331M50V12.5x25F Cap. (µF) 1000 470 330 W.V. (Vdc) 16 35 50 Dissipation Factor Ripple Current Rating (mA) +20°C/120Hz +150°C/100KHz 0.16 750 0.12 750 0.12 500 Max. ESR (Ω) +20°C/120Hz 0.266 0.424 0.604 Load Life Hours @+150°C 1,000 1,000 1,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Capacitance Value 330µF ~ 1000µF 50Hz 0.40 120Hz 0.50 1KHz 0.80 10KHz 100KHz 0.95 1.00 PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1