Aluminum Electrolytic Capacitors/ FM Radial Lead Type Series: FM Type: A ■ Features ● Low impedance (40 % to 70 % less than FC Series) ● Endurance : 2000 h to 7000 h at +105 °C ● RoHS directive compliant ■ Attention Not applicable for automotive ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Endurance –40 °C to +105 °C 6.3 V.DC to 50 V.DC 22 μF to 6800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes W.V. 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 μF for products of 1000 μF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours 08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20: 5000 hours 012.5×25 to 012.5×35/ 016×25 : 7000 hours Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %) tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current W.V.(V.DC) 6.3 to 50 Frequency (Hz) Cap (μF) 22 to 60 120 1k 10 k 100 k 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 6800 0.75 0.80 0.95 1.00 1.00 ■ Dimensions in mm (not to scale) fd±0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= = Body Dia. 0D 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 L16 : L±1.5 L20 : L±2.0 5 6.3 8 10 12.5 16 Body Length L — — — — 12.5 to 25 30 to 40 — Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 – EEE-78 – Aluminum Electrolytic Capacitors/ FM ■ Case size/Impedance/Ripple current 6.3 V to 35 V W.V.(V.DC) Case size (0D×L) Impedance (Ω/100 kHz) 50 V Ripple Current (mA r.m.s./100 kHz) +105 °C Impedance (Ω/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 °C –10 °C +20 °C –10 °C 5 × 11 0.300 1.000 280 0.340 1.130 +105 °C 250 6.3 × 11.2 0.130 0.430 455 0.140 0.460 405 8 × 11.5 0.056 0.168 950 0.061 0.183 870 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.038 0.114 1290 0.042 0.126 1170 10 × 16 0.026 0.078 1790 0.030 0.090 1650 10 × 20 0.019 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 0.022 0.055 2260 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 – EEE-79 – Aluminum Electrolytic Capacitors/ FM ■ Standard Products Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 150 330 560 820 1000 1200 6.3 1500 2200 3300 3900 4700 5600 6800 100 220 470 680 1000 10 1200 1500 2200 3300 3900 4700 5600 68 120 330 470 680 16 1000 1200 1500 2200 2700 3300 3900 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 35 20 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3750 3300 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.012 0.017 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 7000 5000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFM0J151( ) EEUFM0J331( ) EEUFM0J561( ) EEUFM0J821L( ) EEUFM0J102( ) EEUFM0J122L( ) EEUFM0J122( ) EEUFM0J152( ) EEUFM0J222L( ) EEUFM0J332( ) EEUFM0J392( ) EEUFM0J472L EEUFM0J562L EEUFM0J562S( ) EEUFM0J682( ) EEUFM1A101( ) EEUFM1A221( ) EEUFM1A471( ) EEUFM1A681L( ) EEUFM1A681( ) EEUFM1A102L( ) EEUFM1A102( ) EEUFM1A122( ) EEUFM1A152L( ) EEUFM1A222( ) EEUFM1A332( ) EEUFM1A392L EEUFM1A392S( ) EEUFM1A472L EEUFM1A562( ) EEUFM1C680( ) EEUFM1C121( ) EEUFM1C331( ) EEUFM1C471L( ) EEUFM1C471( ) EEUFM1C681L( ) EEUFM1C681( ) EEUFM1C102( ) EEUFM1C122L( ) EEUFM1C152( ) EEUFM1C222( ) EEUFM1C272L EEUFM1C272S( ) EEUFM1C332L EEUFM1C392( ) Long Taping Lead (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 – EEE-80 – Aluminum Electrolytic Capacitors/ FM ■ Standard Products Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 47 100 220 330 470 25 680 820 1000 1500 1800 2200 2700 33 68 150 220 330 35 470 560 680 1000 1200 50 1500 1800 22 56 100 120 150 180 220 270 330 470 560 680 820 1000 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 16 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 35 20 25 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 250 405 870 1140 1170 1430 1650 1890 2150 2260 2660 3160 3270 2870 3320 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.340 0.140 0.061 0.045 0.042 0.033 0.030 0.023 0.022 0.022 0.018 0.016 0.014 0.019 0.016 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 7000 5000 7000 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFM1E470( ) EEUFM1E101( ) EEUFM1E221( ) EEUFM1E331L( ) EEUFM1E331( ) EEUFM1E471L( ) EEUFM1E471( ) EEUFM1E681( ) EEUFM1E821L( ) EEUFM1E102( ) EEUFM1E152( ) EEUFM1E182L EEUFM1E182S( ) EEUFM1E222L EEUFM1E272( ) EEUFM1V330( ) EEUFM1V680( ) EEUFM1V151( ) EEUFM1V221L( ) EEUFM1V221( ) EEUFM1V331L( ) EEUFM1V331( ) EEUFM1V471( ) EEUFM1V561L( ) EEUFM1V681( ) EEUFM1V102( ) EEUFM1V122L EEUFM1V122S( ) EEUFM1V152L EEUFM1V182( ) EEUFM1H220( ) EEUFM1H560( ) EEUFM1H101( ) EEUFM1H121L( ) EEUFM1H151( ) EEUFM1H181L( ) EEUFM1H221( ) EEUFM1H271( ) EEUFM1H331L( ) EEUFM1H471( ) EEUFM1H561( ) EEUFM1H681L EEUFM1H821L EEUFM1H821S( ) EEUFM1H102( ) Long Taping Lead (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 – EEE-81 –