G6A THRU G6M MINIATURE GLASS PASSIVATED RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURE R-1 Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL G6A G6B G6D G6G G6J G6K G6M units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V Maximum Average Forward Rectified Current 3/8" lead length at Ta =75°C If(av) 1.0 A Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Ifsm 30.0 A Maximum Instantaneous Forward Voltage at rated forward current Vf 1.1 V Ir(av) 30.0 5.0 50.0 15.0 50.0 -55 to +150 Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction Capacitance (Note 1) Operating Temperature (Note 2) Storage and Operating Junction Temperature Ir Cj R(ja) Tstg, Tj µA µA µA pF °C /W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G6A THRU G6M 1 1 Rev.A5 www.gulfsemi.com