TC7SZ05FU TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SZ05F,TC7SZ05FU Inverter (Open Drain) Features TC7SZ05F • High output drive: 24 mA (min) @VCC = 3 V • Super high speed operation: tpz = 1.9 ns(typ.)@VCC = 5 V, 50 pF • Operation voltage range: VCC (opr) = 1.80~5.5 V • 5.5V tolerant input. • Power down protection is provided on output. • Matches the performance of TC74LCX series when operated at 3.3 V VCC. TC7SZ05FU Marking Type name J E Weight SSOP5-P-0.95 SSOP5-P-0.65A : 0.016 g (typ.) : 0.006 g (typ.) Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Power supply voltage VCC −0.5~6 V DC input voltage VIN −0.5~6 V DC output voltage VOUT −0.5~6 V Input diode current IIK −20 mA Output diode current IOK −20 mA DC output current IOUT 50 mA DC VCC/ground current ICC ±50 mA Power dissipation PD 200 mW Storage temperature Tstg −65~150 °C TL 260 °C Lead temperature (10s) 1 Pin Assignment (top view) NC 1 5 VCC IN A 2 GND 3 4 OUT Y 2005-05-17 TC7SZ05FU Logic Diagram Truth Table A Y L *Z H L *: High impedance Recommended Operating Conditions Characteristics Symbol Supply voltage VCC Input voltage VIN Output voltage Operating temperature Rating Unit 1.8~5.5 1.5~5.5 (Note 1) 0~5.5 VOUT V 0~5.5 (Note 2) 0~VCC (Note 3) −40~85 Topr V V °C 0~20 (VCC = 1.8 V, 2.5 V ± 0.2 V) Input rise and fall time dt/dv 0~10 (VCC = 3.3 V ± 0.3 V) ns/V 0~5 (VCC = 5.5 V ± 0.5 V) Note 1: Data retention only Note 2: OFF state Note 3: Low state 2 2005-05-17 TC7SZ05FU Electrical Characteristics DC Characteristics Characteristics Symbol High level Ta = 25°C Test Condition VCC (V) Min Typ. Max Min Max 1.8 VCC × 0.75 ⎯ ⎯ VCC × 0.75 ⎯ 2.3~5.5 VCC × 0.7 ⎯ ⎯ VCC × 0.7 ⎯ 1.8 ⎯ ⎯ VCC × 0.25 ⎯ VCC × 0.25 2.3~5.5 ⎯ ⎯ VCC × 0.3 ⎯ VCC × 0.3 1.8~5.5 ⎯ ⎯ ±5 ⎯ ±10 1.8 ⎯ 0 0.1 ⎯ 0.1 2.3 ⎯ 0 0.1 ⎯ 0.1 3.0 ⎯ 0 0.1 ⎯ 0.1 4.5 ⎯ 0 0.1 ⎯ 0.1 IOL = 8 mA 2.3 ⎯ 0.1 0.3 ⎯ 0.3 IOL = 16 mA 3.0 ⎯ 0.15 0.4 ⎯ 0.4 IOL = 24 mA 3.0 ⎯ 0.22 0.55 ⎯ 0.55 IOL = 32 mA 4.5 ⎯ 0.22 0.55 ⎯ 0.55 ⎯ VIH Input voltage Low level High level 0utput leakage ⎯ VIL ILKG VIN = VIL IOL = 100 µA Output voltage VOL VOL VIN = VIH Ta = −40~85°C Unit V µA V IIN VIN = 5.5 V or GND 0~5.5 ⎯ ⎯ ±1 ⎯ ±10 µA Power off leakage current IOFF VIN or VOUT = 5.5 V 0.0 ⎯ ⎯ 1 ⎯ 10 µA Quiescent supply current ICC VIN = VCC or GND 5.5 ⎯ ⎯ 2 ⎯ 20 µA Input leakage current 3 2005-05-17 TC7SZ05FU AC Characteristics (unless otherwise specified, Input: tr = tf = 3 ns) Characteristics Symbol tpZL Test Condition CL = 50 pF, RL = 500 Ω Propagation delay time tpLZ Input capacitance CIN Power dissipation capacitance CPD CL = 50 pF, RL = 500 Ω ⎯ (Note 4) Ta = 25°C Ta = −40~85°C VCC (V) Min Typ. Max Min Max 1.8 1.5 4.6 10.5 1.5 11.0 2.5 ± 0.2 0.8 3.0 7.0 0.8 7.5 3.3 ± 0.3 0.8 2.4 5.0 0.8 5.2 5.0 ± 0.5 0.5 1.9 4.3 0.5 4.5 1.8 1.5 4.1 10.5 1.5 11.0 2.5 ± 0.2 0.8 2.5 7.0 0.8 7.5 3.3 ± 0.3 0.8 2.1 5.0 0.8 5.2 5.0 ± 0.5 0.5 1.2 4.3 0.5 4.5 0~5.5 ⎯ 4 ⎯ ⎯ ⎯ 3.3 ⎯ 3.6 ⎯ ⎯ ⎯ 5.5 ⎯ 6.5 ⎯ ⎯ ⎯ Unit ns ns pF pF Note 4: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC 4 2005-05-17 TC7SZ05FU Package Dimensions Weight: 0.016 g (typ.) 5 2005-05-17 TC7SZ05FU Package Dimensions Weight: 0.006 g (typ.) 6 2005-05-17 TC7SZ05FU RESTRICTIONS ON PRODUCT USE 030619EBA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document are subject to the foreign exchange and foreign trade laws. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 7 2005-05-17