IQD CFPT-9008 Tcxo specification Datasheet

TCXO Specification
CFPT-9008
ISSUE 13; April 2016
Description
Sub 1ppm performance TCXO, a single chip oscillator and
analogue compensation circuit operating over an extended
temperature range. Its ability to function down to a supply
voltage of 2.4V and low power consumption make it
particularly suitable for mobile applications.
-1A No ref voltage, ageing adj option
-1B No ref voltage, no freq adj option
-2A Ref voltage = 2.2V, ageing adj option
-3A Ref voltage = 2.7V, ageing adj option
Frequency Parameters
Frequency
Frequency Stability
Ageing
10.0MHz to 40.0MHz
±0.30ppm to ±2.50ppm
±2ppm max in 1st year
Electrical Parameters
3.3V ±10%
Supply Voltage
Supply Current: 1+Frequency(MHz)
*1.2*{Load(pF)+30}*10–3mA
Supply voltages in the range 2.4V to 6.0V available to order,
please contact our sales offices
Optional reference voltage output on pad 1, suitable for
potentiometer supply or DAC reference:
1. No output (standard option)
2. 2.2V, for Min. VS>2.4V
3. 2.7V, for Min. VS>3.0V
Maximum load current (mA) = Vref/10
For manual frequency adjustment connect an external 50kΩ
potentiometer between pad 1 (Reference Voltage) and pad 4
(GND) with wiper connected to pad 10 (Voltage Control).
Please specify reference voltage as part of the ordering code.
Outline (mm) -1A = No ref voltage, ageing adj
option
Frequency Adjustment
Three options with external Voltage Control applied to pad 10:
A. Ageing Adjustment:
>±5ppm, frequency <20MHz
>±7ppm, frequency >20MHz
B. No frequency adjustment initial calibration @ 25°C <
±1.0ppm
C. High Pulling ±10ppm to ±50ppm can be available
depending on frequency and stability options (please contact
our sales offices)
Linearity: <1%
Slope: Positive
Input Resistance: >100kΩ
Modulation Bandwidth: >2kHz
Voltage Control Range:
Without reference voltage: 1.65V±1V
With reference voltage: Vc = 0V to Vref
Ageing:
±1ppm maximum in 1st year, frequency <20MHz
±3ppm maximum for 10 years (including the 1st year),
frequency <20MHz
±2ppm maximum in 1st year, frequency ≥20MHz
±5ppm maximum for 10 years (including the 1st year),
frequency ≥20MHz
After Reflow: ±1ppm max
Test Circuit
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:59 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 1 of 3
TCXO Specification
CFPT-9008
Operating Temperature Ranges
0 to 50°C
-20 to 70°C
0 to 70°C
-30 to 75°C
-40 to 85°C
Output Details
Output Compatability
Load: 10kΩ // 10pF, AC-coupled
Clipped Sine
Output Control
Tri-state Operation:
Logic ‘1’ (>60% Vs) to pad 8 enables output
Logic ‘0’ (<20% Vs) to pad 8 disables output
When at logic ‘0’ the output stage is disabled for all output
options, but the oscillator and compensation circuit are still
active (current consumption <1mA)
Output Levels
Vpk-pk > 0.8V
Noise Parameters
Phase Noise Typical (@ 13.0MHz):
Offset
dBc/Hz
10Hz
-95
100Hz
-120
1kHz
-135
10kHz
-140
100kHz -145
Environmental Parameters
Storage Temperature Range: –55 to 125°C
Shock: IEC 60068-2-27, Test Ea: 1500G acceleration for 6ms,
3 shocks in each of 3 mutually perpendicular planes
Vibration: IEC 60068-2-6, Test Fc, Procedure B4: 10Hz-60Hz,
1.5mm displacement, 60-2000Hz at 98.1m/s², 30mins in 3
mutually perpendicular planes at 1 oct/min
Solderability: MIL-STD-202, Method 208, Category 3
Ordering Information
Frequency*
Model*
Reference Voltage + Frequency Adjustment Options*
Output
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
10.0MHz CFPT-9008-1A
Clipped Sine ±1.0ppm -20 to 70C 3.3V
Note: Certain frequency stability / temperature range
combinations may not be available for all frequencies.
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
1
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:59 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 2 of 3
TCXO Specification
CFPT-9008
Packaging Details
Pack Style: Reel
Pack Size: 1,000
Tape & reel in accordance with EIA-481-D
Pack Style: Bulk
Pack Size: 10
Loose in bulk pack
Electrical Specification - maximum limiting values 3.3V ±10%
Frequency
Min
Frequency
Max
10.0MHz
40.0MHz
Temperature
Range
Stability
(Min)
Current
Draw
Rise and Fall
Time
Duty Cycle
°C
ppm
mA
ns
%
0 to 70
±0.3
-
-
-
-20 to 70
±0.5
-
-
-
-30 to 75
±1.0
-
-
-
-40 to 85
±1.0
-
-
-
This document was correct at the time of printing; please contact your local sales office for the latest version.
Click to view latest version on our website.
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:59 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 3 of 3
Similar pages