EMI/RFI Non-Env. Backshells AS85049/19 EMI/RFI Non-Environmental Backshells M85049/19 11 W 03 A Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 Basic Part No. Length Code (Omit for Standard) Shell Size Clamp Size Finish N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab Over Electroless Nickel Length 1.350 (34.3) Max A Thread C Dia Cable Range TABLE I Clamp Size Shell (Table II) Size Min Max 9 01 02 11 01 03 13 02 04 15 02 05 17 02 06 19 03 07 21 03 08 23 03 09 25 04 10 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H E TABLE II C Dia Max .75 (19.1) .85 (21.6) 1.00 (25.4) 1.10 (27.9) 1.25 (31.8) 1.40 (35.6) 1.50 (38.1) 1.65 (41.9) 1.70 (43.2) Clamp Size 01 02 03 04 05 06 07 08 09 10 Cable Range Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .437 (11.1) .625 (15.9) .562 (14.3) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) .937 (23.8) 1.125 (28.6) 1.062 (27.0) 1.250 (31.8) E Max .80 (20.3) 1.00 (25.4) 1.10 (27.9) 1.20 (30.5) 1.25 (31.8) 1.40 (35.6) 1.50 (38.1) 1.65 (41.9) 1.75 (44.5) 1.90 (48.3) TABLE III 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Length Code Std. A B C Available Shell Sizes 9 - 25 9 - 25 15 - 25 21 - 25 Length 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 38-5