Part Number: www.SunLED.com EUR28D 10mmx22mm LIGHT BAR Features z UNIFORM LIGHT EMITTING AREA. z EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY STANDARD SOCKETS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z MECHANICALLY RUGGED. z I.C. COMPATIBLE. z BOTTOM SURFACE OF EPOXY IS NOT FLAT. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Unit Forward Voltage (Typ.) (IF=10mA) VF 1.9 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current(Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 627 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 625 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 45 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 mA Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 mW Lead Solder Temperature [2mm below package base] 260°C For 3 Seconds Lead Solder Temperature [5mm below package base] 260°C For 5 Seconds Part Number EUR28D Emitting Color Red Published Date : MAR.20,.2008 Unit UR (GaAsP/GaP) Reverse Voltage Storage Temperature UR (GaAsP/GaP) Emitting Material GaAsP/GaP °C Luminous Intensity (IF=10mA) mcd Lens-color Red Diffused Drawing No : SDSA3901 min. typ. 5 9 V3 Wavelength nm λP Viewing Angle 2 θ 1/2 627 120° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com EUR28D 10mmx22mm LIGHT BAR UR Published Date : MAR.20,.2008 Drawing No : SDSA3901 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com EUR28D 10mmx22mm LIGHT BAR Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR.20,.2008 Drawing No : SDSA3901 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 10mmx22mm LIGHT BAR PACKING & LABEL SPECIFICATIONS Published Date : MAR.20,.2008 EUR28D Drawing No : SDSA3901 EUR28D V3 Checked : B.L.LIU P.4/4